[BIS insights](https://indusdesk.com/bis/insights/)

# BIS drops the in-house laboratory rule for licensees

https://indusdesk.com/bis/insights/bis-drops-the-in-house-laboratory-rule-for-licensees/

The Bureau of Indian Standards issued CMD-I/2:4:1 on December 16, 2025. BIS circular CMD-I/2:4:1 of December 16, 2025 says manufacturers need no in-house laboratory to run BIS certification and may test at shared or outside labs. It applies with immediate effect.

BIS · December 16, 2025

Vishnu Gupta

The Bureau of Indian Standards (BIS), Central Marks Department-I, issued a circular, Our Ref: CMD-I/2:4:1, dated December 16, 2025. Its subject is the in-house laboratory requirement for manufacturers operating BIS product certification. It says manufacturers no longer have to maintain an in-house laboratory to operate BIS certification: "There is no obligation to maintain in-house laboratory". The circular came into force with immediate effect. It supersedes the earlier circular of the same number, dated July 16, 2024.

In place of an in-house laboratory, the circular permits three ways to operate BIS certification. The first is shared testing resources, such as a common facility. The second is a cluster-based testing facility. The third is sub-contracting to outside laboratories, which may be either laboratories BIS has recognized or empaneled, or any laboratory accredited to ISO/IEC 17025.

The circular also says the scheme of inspection and testing in BIS's product manuals is "recommendatory in nature". Manufacturers may declare their own Quality Assurance Plan (QAP), which they will follow to make sure their products comply with the relevant standards.

The circular applies to all products except three groups. The first is DPIIT- or PESO-regulated products under pre-dispatch or lot inspection, and cement products regulated by the "DPIIT/Cement Desk". The second is food products and protective helmets for two-wheeler riders. The third is products whose BIS certification is operated on a factory testing basis under product-specific guidelines. The circular does not list the products it covers, does not say what the July 16, 2024 circular required, and carries no signature.

**Issued by**: Bureau of Indian Standards, Central Marks Department-I

**Document**: Circular, Our Ref: CMD-I/2:4:1

**Dated**: December 16, 2025

**Subject**: In-house laboratory requirement for manufacturers operating BIS product certification

**Takes effect**: With immediate effect

**Replaces**: The earlier circular of the same number, dated July 16, 2024

**In-house laboratory**: No longer required: "There is no obligation to maintain in-house laboratory"

**Testing allowed**: Shared testing resources such as a common facility; a cluster-based testing facility; outside laboratories recognized or empaneled by BIS, or accredited to ISO/IEC 17025

**Product manuals**: Their scheme of inspection and testing is "recommendatory in nature"; manufacturers may declare their own Quality Assurance Plan (QAP)

**Not covered**: DPIIT- or PESO-regulated products under pre-dispatch or lot inspection; cement products regulated by the DPIIT/Cement Desk; food products; protective helmets for two-wheeler riders; products certified on a factory testing basis under product-specific guidelines

[The circular](https://files.indusdesk.com/bis/circulars/2025/cmd-i-2-4-1-2025-12-16.pdf) (PDF, 75 KB)

Source: [BIS's own copy](https://www.bis.gov.in/wp-content/uploads/2025/12/In-house-Lab-Circular-Dec-2025.pdf).

Checked against the official copy on October 28, 2026.

- [BIS guide](https://indusdesk.com/bis/)

- [All BIS insights](https://indusdesk.com/bis/insights/)
