[DGFT insights](https://indusdesk.com/dgft/insights/)

# Export credit subvention adds 167 iron and steel lines for MSEs

https://indusdesk.com/dgft/insights/export-credit-subvention-adds-167-iron-and-steel-lines-for-mses/

DGFT Trade Notice No. 01/2026-27 adds 167 Chapter 72 iron and steel tariff lines to export credit interest subvention, for micro and small enterprises only. The Directorate General of Foreign Trade issued it on April 20, 2026. It amends Annexure-II of Trade Notice No. 20/2025-26 (Annexure-IIA inserted).

DGFT · April 20, 2026

Vishnu Gupta

The Directorate General of Foreign Trade (DGFT), Department of Commerce, Ministry of Commerce & Industry, issued Trade Notice No. 01/2026-27, dated April 20, 2026. Its subject is the inclusion of Chapter 72 tariff lines for Micro and Small Enterprises under Interest Subvention Support. It refers to the guidelines for Interest Subvention Support for Pre- and Post-Shipment Export Credit under the Export Promotion Mission (EPM), issued through Trade Notice No. 20/2025-26 dated January 2, 2026, Trade Notice No. 22/2025-26 dated January 16, 2026 and Trade Notice No. 33/2025-26 dated March 20, 2026. It is issued with the approval of the Competent Authority, from File No. 01/02/48/AM-26/EPM, and signed by A.G. Subramanian, Deputy Director General of Foreign Trade.

The notice inserts Annexure-IIA into Annexure-II of Trade Notice No. 20/2025-26. The tariff lines in Annexure-IIA are eligible for interest subvention support "only in respect of export credit availed by Micro and Small Enterprises (MSEs)". The notice states that Medium Enterprises shall not be eligible for interest subvention support in respect of exports covered under Annexure-IIA. The annexure's own heading calls it an "Additional List of Tariff Lines Eligible only for Micro and Small Exporters for Interest Subvention for Pre- and Post-Shipment Export Credit".

Annexure-IIA lists 167 tariff lines at the HS six-digit level, numbered 1 to 167, all in Chapter 72. They fall under all 29 headings from 7201 to 7229, from non-alloy pig iron (720110) to alloy steel wire (722990). They cover pig iron, ferro-alloys, ferrous waste and scrap, semi-finished products, flat-rolled products, bars and rods, sections and wire, in iron or non-alloy steel, stainless steel and alloy steel. The largest groups are ferro-alloys under heading 7202, with 15 lines, and flat-rolled products under headings 7208 and 7219, with 14 lines each.

Eligibility under Annexure-IIA is prospective. Interest subvention is admissible only for eligible export credit disbursed on or after the date of issuance of the notice, April 20, 2026, "in line with the principle of non-retrospective applicability". All other provisions of Trade Notice No. 20/2025-26, read with Trade Notices No. 22/2025-26 and No. 33/2025-26, remain unchanged. The notice does not state a rate of subvention or a cap on the benefit, and it lists no tariff line outside Chapter 72.

Three later trade notices on the scheme, Nos. 03/2026-27, 13/2026-27 and 17/2026-27, list Trade Notice No. 01/2026-27 among its guidelines. None of them changes Annexure-IIA. Trade Notice No. 03/2026-27 of May 13, 2026 sets when a Unique Identification Number (UIN) may be generated after the credit is disbursed. Trade Notice No. 13/2026-27 of July 14, 2026 clarifies how banks file claims against UINs. Trade Notice No. 17/2026-27 of August 7, 2026 makes the Export-Import Bank of India (EXIM Bank) the implementing agency in place of the Reserve Bank of India (RBI) with effect from April 1, 2026. RBI still processes supplementary or additional claims for the January to March 2026 quarter.

**Issued by**: Directorate General of Foreign Trade, Department of Commerce, Ministry of Commerce & Industry

**Document**: Trade Notice No. 01/2026-27

**Dated**: April 20, 2026

**Scheme**: Interest Subvention Support for Pre- and Post-Shipment Export Credit, Export Promotion Mission (EPM)

**Applies to**: Export credit availed by Micro and Small Enterprises (MSEs) for exports of the tariff lines in Annexure-IIA; Medium Enterprises are not eligible for these lines

**Takes effect**: Prospective: eligible export credit disbursed on or after the date of issuance of the notice, April 20, 2026

**Amends**: Annexure-II of Trade Notice No. 20/2025-26 (Annexure-IIA inserted)

**Tariff lines added**: 167, at the HS six-digit level, all in Chapter 72, under headings 7201 to 7229

**Rate and cap**: Not stated in the notice

**Other provisions**: Trade Notice No. 20/2025-26, read with Trade Notices No. 22/2025-26 and No. 33/2025-26: unchanged

**Related**: Trade Notice No. 03/2026-27, May 13, 2026: a UIN generated on or before May 31, 2026 for credit disbursed from January 2, 2026 in FY 2025-26, and within 15 days of disbursal from FY 2026-27; Annexure-IIA not changed

**Related**: Trade Notice No. 13/2026-27, July 14, 2026: clarifications on claims and UINs for lending institutions; Annexure-IIA not changed

**Implementing agency**: EXIM Bank in place of RBI with effect from April 1, 2026; RBI still processes additional claims for the January to March 2026 quarter (Trade Notice No. 17/2026-27, August 7, 2026)

**File number**: 01/02/48/AM-26/EPM

**Signed by**: A.G. Subramanian, Deputy Director General of Foreign Trade

## Annexure-IIA: the 167 tariff lines by four-digit heading

| HS heading | Goods, from the annexure's descriptions | Tariff lines |
|---|---|---|
| 7201 | Pig iron and spiegeleisen | 3 |
| 7202 | Ferro-alloys | 15 |
| 7203 | Ferrous products from direct reduction of iron ore; spongy ferrous products | 2 |
| 7204 | Ferrous waste and scrap; remelting scrap ingots | 7 |
| 7205 | Granules and powders of pig iron, spiegeleisen, iron or steel | 3 |
| 7206 | Iron or non-alloy steel: ingots and other primary forms | 2 |
| 7207 | Iron or non-alloy steel: semi-finished products | 4 |
| 7208 | Iron or non-alloy steel: flat-rolled, width 600mm or more, hot-rolled | 14 |
| 7209 | Iron or non-alloy steel: flat-rolled, width 600mm or more, cold-rolled | 9 |
| 7210 | Iron or non-alloy steel: flat-rolled, width 600mm or more, plated, coated or painted | 11 |
| 7211 | Iron or non-alloy steel: flat-rolled, width less than 600mm | 6 |
| 7212 | Iron or non-alloy steel: flat-rolled, width less than 600mm, plated, coated, painted or clad | 6 |
| 7213 | Iron or non-alloy steel: bars and rods, hot-rolled, in irregularly wound coils | 4 |
| 7214 | Iron or non-alloy steel: bars and rods, forged, hot-rolled, hot-drawn or hot-extruded | 5 |
| 7215 | Iron or non-alloy steel: other bars and rods | 3 |
| 7216 | Iron or non-alloy steel: angles, shapes and sections | 12 |
| 7217 | Iron or non-alloy steel: wire | 4 |
| 7218 | Stainless steel: ingots, other primary forms and semi-finished products | 3 |
| 7219 | Stainless steel: flat-rolled, width 600mm or more | 14 |
| 7220 | Stainless steel: flat-rolled, width less than 600mm | 4 |
| 7221 | Stainless steel: bars and rods, hot-rolled, in irregularly wound coils | 1 |
| 7222 | Stainless steel: other bars and rods; angles, shapes and sections | 5 |
| 7223 | Stainless steel: wire | 1 |
| 7224 | Alloy steel: ingots, other primary forms and semi-finished products | 2 |
| 7225 | Alloy steel: flat-rolled, width 600mm or more | 8 |
| 7226 | Alloy steel: flat-rolled, width less than 600mm | 6 |
| 7227 | Alloy steel: bars and rods, hot-rolled, in irregularly wound coils | 3 |
| 7228 | Alloy steel: other bars and rods; angles, shapes and sections; hollow drill bars and rods of alloy or non-alloy steel | 8 |
| 7229 | Alloy steel: wire | 2 |

[The trade notice](https://files.indusdesk.com/dgft/trade-notices/2026-27/trade-notice-1.pdf) (PDF, 585 KB)

Source: [DGFT's own copy](https://content.dgft.gov.in/Website/TNCh72+Inclusion.pdf).

Checked against the official copy on October 28, 2026.

- [DGFT guide](https://indusdesk.com/dgft/)

- [All DGFT insights](https://indusdesk.com/dgft/insights/)
