[QCO tracker](https://indusdesk.com/qco/tracker/)

# Quality Control Order for aluminium and aluminium alloy products under 17 Indian Standards

https://indusdesk.com/qco/tracker/aluminium-and-aluminium-alloy-products-under-17-indian-so-4241/

The 2026 order applies seven of its 17 aluminium and alloy product standards on publication, March 13, 2026, and the other ten from December 1, 2026. The Bureau of Indian Standards is the certifying and enforcing authority. Certification is under Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.

Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026 · Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade)

IndusDesk · September 25, 2023

The Aluminium and Aluminium Alloy Products (Quality Control) Order was first issued by the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade, as S.O. 4241(E), dated September 25, 2023. It covers aluminium and aluminium alloy products under 17 Indian Standards, including irrigation tubes, EC grade rod, bars, rods, sections, plate, sheet, strip, wire, rivet stock, forgings, foil for pharmaceutical packaging, composite panels, corrugated sheet and alloys for utensils.

The goods must conform to the corresponding Indian Standard and bear the Standard Mark under a licence from the Bureau of Indian Standards. Goods manufactured domestically for export are excluded, and since S.O. 1512(E) of March 22, 2024, so are imports of up to two hundred kilograms a year for research and development by manufacturers of aluminium products, subject to conditions.

The 2023 order was to take effect six months after publication; S.O. 1512(E) moved this to September 26, 2024. It was superseded by the 2024 order (S.O. 4696(E)), effective April 1, 2025, which was superseded by the 2025 order (S.O. 2021(E)), effective October 1, 2025. Two corrigenda of June 16, 2025 corrected a standard number and a date in the 2025 order. In February 2026, S.O. 775(E) and S.O. 776(E) exempted certain consignments shipped or ordered before October 1, 2025.

The current text is the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026 (S.O. 1319(E), dated March 11, 2026), which came into force on publication. It applies seven standards with immediate effect and the remaining ten from December 1, 2026, with later dates in the columns for small and micro enterprises.

**Order**: Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026

**Issued by**: Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade)

**Product group**: Aluminium and Aluminium Alloy Products

**Where it stands**: In force

**What it requires**: The aluminium and aluminium alloy products in the Table must conform to the corresponding Indian Standard and bear the Standard Mark under a licence from the Bureau of Indian Standards as per Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018. The latest version of each Indian Standard, including its amendments, as notified by the Bureau from time to time, applies.

**Certification scheme**: Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018

**Came into force**: The 2026 order came into force on the date of its publication in the Official Gazette (March 13, 2026); its Table applies seven of the standards (IS 7092 (Part 1), IS 7092 (Part 2), IS 5484, IS 16011, IS 17682, IS 1254 and IS 7902) with immediate effect and the other ten from December 1, 2026 for enterprises other than micro and small enterprises. The 2023 order was to come into force six months from publication, later substituted with September 26, 2024; the 2024 order named April 1, 2025, and the 2025 order October 1, 2025

**Small enterprises**: Under the 2026 order, the first seven standards in the Table apply with immediate effect to all enterprises. For the other ten (IS 733, IS 734, IS 736, IS 737, IS 739, IS 740, IS 1285, IS 2067, IS 21 and IS 5082), the Table gives March 1, 2027 in the column headed small enterprises and June 1, 2027 in the column headed micro enterprises; the proviso refers to micro enterprises and small enterprises and to columns (6) and (7) respectively. Earlier dates: the 2025 order set January 1, 2026 for small and April 1, 2026 for micro enterprises; the 2024 order July 1, 2025 and October 1, 2025; the 2023 order nine and twelve months from publication, substituted by S.O. 1512(E) with December 26, 2024 and March 26, 2025.

**Exemptions**:

- Goods or articles manufactured domestically for export

- Goods or articles imported up to two hundred kilograms per year for the purpose of research and development by manufacturers of Aluminium products, on condition that they are not sold commercially and are disposed of as scrap, and that the manufacturer maintains a year-wise record of them and furnishes it to the Central Government on its letter head signed by its authorised signatory (first added by S.O. 1512(E), under which the record was to be furnished if so desired by the Government authorities; the 2024, 2025 and 2026 orders require it to be furnished to the Central Government)

- S.O. 775(E): imports, under the 2025 order (implementation October 1, 2025), in a consignment with a Bill of Lading shipped before the date of implementation and a Bill of Entry on or before one hundred and eighty days after it, subject to the importer giving the Bureau copies of the Bill of Lading, Bill of Entry and supporting documents within seven days of clearance

- S.O. 776(E): goods, under the 2025 order (implementation October 1, 2025), for which the purchase order was placed before the date of implementation and the Bill of Lading and Bill of Entry are dated on or before one hundred and eighty days from the date the order came into force, subject to the importer giving the Bureau copies of the Purchase Order, Bill of Lading, Bill of Entry and supporting documents within seven days of clearance

**Enforcement**: The Bureau of Indian Standards is the certifying and enforcing authority. Any person who contravenes the provisions of the order is punishable under the provisions of the Bureau of Indian Standards Act, 2016.

## The products and their standards

| Product | Indian Standard | Title of the standard |
|---|---|---|
| Aluminium alloy tubes for irrigation purposes - welded tubes | IS 7092 (Part 1):1992 | Aluminium alloy tubes for irrigation purposes - welded tubes |
| Aluminium alloy tube for irrigation purposes - extruded tube | IS 7092 (Part 2):1987 | Aluminium alloy tube for irrigation purposes - extruded tube |
| EC Grade Aluminium Rod produced by Continuous Casting and Rolling | IS 5484:1997 | EC Grade Aluminium Rod produced by Continuous Casting and Rolling |
| Aluminium and aluminium alloy foil for pharmaceutical packaging | IS 16011:2012 | Aluminium and aluminium alloy foil for pharmaceutical packaging |
| Aluminium composite panel | IS 17682:2021 | Aluminium composite panel |
| Corrugated Aluminium Sheet | IS 1254:2007 | Corrugated Aluminium Sheet |
| Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications | IS 7902:2001 | Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications |
| Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering purposes) | IS 733:1983 | Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering purposes) |
| Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes | IS 734:1975 | Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes |
| Wrought aluminium and aluminium alloy plate for general engineering purposes | IS 736:1986 | Wrought aluminium and aluminium alloy plate for general engineering purposes |
| Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes | IS 737:2008 | Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes |
| Wrought aluminium and aluminium alloy wire for general engineering purposes | IS 739:1992 | Wrought aluminium and aluminium alloy wire for general engineering purposes |
| Wrought aluminium and aluminium alloy rivet stock for general engineering purposes | IS 740:1977 | Wrought aluminium and aluminium alloy rivet stock for general engineering purposes |
| Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes | IS 1285:2002 | Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes |
| Wrought Aluminium Wire for Electrical purposes | IS 2067:1975 | Wrought Aluminium Wire for Electrical purposes |
| Wrought aluminium and aluminium alloys for manufacture of utensils | IS 21:1992 | Wrought aluminium and aluminium alloys for manufacture of utensils |
| Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications | IS 5082:1998 | Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications |

## Every notification on this order

| Date | Notification | Status | What it did |
|---|---|---|---|
| March 13, 2026 | S.O. 1319(E)](https://files.indusdesk.com/qco/2026/so-1319e.pdf) PDF, 737 KB · Gazette](https://egazette.gov.in/WriteReadData/2026/270938.pdf) | In force | Issued the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, dated March 11, 2026, in supersession of the 2025 order, in force from its publication. Seven of the 17 standards apply with immediate effect; the other ten apply from December 1, 2026, with March 1, 2027 and June 1, 2027 in the columns headed small and micro enterprises. |
| February 13, 2026 | S.O. 775(E)](https://files.indusdesk.com/qco/2026/so-775e.pdf) PDF, 724 KB · Gazette](https://egazette.gov.in/WriteReadData/2026/270117.pdf) | In force | Dated February 12, 2026, it exempted imports under 26 listed orders, including the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025 (notified May 6, 2025, implementation October 1, 2025), where the Bill of Lading shows shipment before the date of implementation and the Bill of Entry is on or before 180 days after it. The importer must give the Bureau copies of these documents within seven days of clearance. |
| February 13, 2026 | S.O. 776(E)](https://files.indusdesk.com/qco/2026/so-776e.pdf) PDF, 724 KB · Gazette](https://egazette.gov.in/WriteReadData/2026/270119.pdf) | In force | Dated February 12, 2026, it exempted goods under 26 listed orders, including the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025 (notified May 6, 2025, implementation October 1, 2025), where the purchase order was placed before the date of implementation and the Bill of Lading and Bill of Entry are dated on or before 180 days from that date. The importer must give the Bureau copies within seven days of clearance. |
| June 16, 2025 | S.O. 2682(E)](https://files.indusdesk.com/qco/2025/so-2682e.pdf) PDF, 381 KB · Gazette](https://egazette.gov.in/WriteReadData/2025/263877.pdf) | In force | A corrigendum to the 2025 order (S.O. 2021(E)): in the Table against Sl. No. 3, column (3), “IS 5485:1997” is to read “IS 5484:1997”. |
| June 16, 2025 | S.O. 2683(E)](https://files.indusdesk.com/qco/2025/so-2683e.pdf) PDF, 340 KB · Gazette](https://egazette.gov.in/WriteReadData/2025/263878.pdf) | In force | A corrigendum to the 2025 order (S.O. 2021(E)), published in Hindi only: in column (6) of the Table, “1 April, 2025” is to read “1 April, 2026”. The English text of S.O. 2021(E) already gives April 1, 2026 in that column, for micro enterprises. |
| May 6, 2025 | S.O. 2021(E)](https://files.indusdesk.com/qco/2025/so-2021e.pdf) PDF, 1.9 MB · Gazette](https://egazette.gov.in/WriteReadData/2025/262927.pdf) | In force | Issued the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, dated May 5, 2025, in supersession of the 2024 order, in force from October 1, 2025, with January 1, 2026 for small enterprises and April 1, 2026 for micro enterprises. |
| October 25, 2024 | S.O. 4696(E)](https://files.indusdesk.com/qco/2024/so-4696e.pdf) PDF, 1.7 MB · Gazette](https://egazette.gov.in/WriteReadData/2024/258286.pdf) | In force | Issued the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2024, dated October 25, 2024, in supersession of the 2023 order, in force from April 1, 2025, with July 1, 2025 for small enterprises and October 1, 2025 for micro enterprises. |
| March 22, 2024 | S.O. 1512(E)](https://files.indusdesk.com/qco/2024/so-1512e.pdf) PDF, 706 KB · Gazette](https://egazette.gov.in/WriteReadData/2024/253310.pdf) | Amended | Issued the Aluminium and Aluminium Alloy Products (Quality Control) Amendment Order, 2024 (printed “Aluminium amd”), dated March 22, 2024. It set September 26, 2024 as the date of commencement, deferred the order for small enterprises until December 26, 2024 and for micro enterprises until March 26, 2025, and exempted imports of up to two hundred kilograms a year for research and development by manufacturers of Aluminium products. |
| September 25, 2023 | S.O. 4241(E)](https://files.indusdesk.com/qco/2023/so-4241e.pdf) PDF, 1.1 MB · Gazette](https://egazette.gov.in/WriteReadData/2023/249046.pdf) | In force | Issued the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, dated September 25, 2023, under section 16 of the Bureau of Indian Standards Act, 2016, covering 17 Indian Standards, to come into force six months from publication, nine months for small enterprises and twelve months for micro enterprises. |

[[[[[[[[[[[[[[[[[[

Each notification is linked, as a PDF, in the list above.

Where a notification shows "Gazette", that links the Gazette of India's copy; ours was checked against it on October 20, 2026.

- [QCO guide](https://indusdesk.com/qco/)

- [All Quality Control Orders](https://indusdesk.com/qco/tracker/)
