[QCO tracker](https://indusdesk.com/qco/tracker/)

# Quality Control Order for door closers, floor springs, rim latches and door handles

https://indusdesk.com/qco/tracker/door-closers-floor-springs-rim-latches-and-door-so-4646/

The 2023 order requires the BIS Standard Mark on door closers, floor springs, rim latches and door handles under seven Indian Standards. It does not apply to goods or articles manufactured domestically for the purpose of export. The Bureau of Indian Standards is the certifying and enforcing authority.

Door Fittings (Quality Control) Order, 2023 · Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade)

IndusDesk · October 23, 2023

The Door Fittings (Quality Control) Order, 2023 was issued by the Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade) as S.O. 4646(E), dated October 23, 2023, and published in the Gazette of India on October 25, 2023.

It covers door fittings under seven Indian Standards: pneumatically regulated door closers for light doors weighing up to 40 kg (IS 6343:1982), concealed hydraulically regulated door closers (IS 14912:2001), hydraulically regulated door closers (IS 3564:1995), hydraulically regulated floor springs for heavy doors (IS 6315:1992), rim latches (IS 1019:1974), door handles (IS 208:2020) and door handles for mortice locks of the vertical type (IS 4992:1975). The Table's note says the latest version of each standard, including amendments, applies.

The goods must conform to the standard and bear the Standard Mark under a licence from the Bureau of Indian Standards, as per Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018. The order does not apply to goods manufactured domestically for export. The Bureau is the certifying and enforcing authority, and contraventions are punishable under the Bureau of Indian Standards Act, 2016.

The order comes into force on the expiry of six months from its publication. For small enterprises the period is nine months, and for micro enterprises twelve months. No later amendment to the order appears in this record.

**Order**: Door Fittings (Quality Control) Order, 2023

**Issued by**: Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade)

**Product group**: Door Fittings

**Where it stands**: In force

**What it requires**: Door fittings must conform to the corresponding Indian Standard in the Table and bear the Standard Mark under a licence from the Bureau of Indian Standards. The Table's note says the latest version of each Indian Standard, including its amendments, as notified by the Bureau, applies.

**Certification scheme**: Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018

**Came into force**: On the expiry of six months from the date of publication of the notification in the Official Gazette

**Small enterprises**: For micro enterprises, as defined in the Micro, Small and Medium Enterprises Development Act, 2006, the order comes into force on the expiry of twelve months from the date of publication; for small enterprises, on the expiry of nine months from the date of publication.

**Exemptions**: Goods or articles manufactured domestically for the purpose of export

**Enforcement**: The Bureau of Indian Standards is the certifying and enforcing authority. Any person who contravenes the order is punishable in accordance with the provisions of the Bureau of Indian Standards Act, 2016.

## The products and their standards

| Product | Indian Standard | Title of the standard |
|---|---|---|
| Door closers (pneumatically regulated) for light doors weighing up to 40 kg | IS 6343:1982 | Door closers (pneumatically regulated) for light doors weighing up to 40 kg |
| Door closers, concealed type (hydraulically regulated) | IS 14912:2001 | Door closers, concealed type (hydraulically regulated) |
| Hydraulically Regulated Door Closers | IS 3564:1995 | Hydraulically Regulated Door Closers |
| Floor springs (hydraulically regulated) for heavy doors | IS 6315:1992 | Floor springs (hydraulically regulated) for heavy doors |
| Rim Latches | IS 1019:1974 | Rim Latches |
| Door Handles | IS 208:2020 | Door Handles |
| Door handles for mortice lock (vertical type) | IS 4992:1975 | Door handles for mortice lock (vertical type) |

## Every notification on this order

| Date | Notification | Status | What it did |
|---|---|---|---|
| October 23, 2023 | S.O. 4646(E)](https://files.indusdesk.com/qco/2023/so-4646e.pdf) PDF, 1.4 MB · Gazette](https://egazette.gov.in/WriteReadData/2023/249685.pdf) | In force | Issued the Door Fittings (Quality Control) Order, 2023, requiring seven kinds of door fittings to conform to their Indian Standards and bear the Standard Mark, from six months after publication, with nine months for small enterprises and twelve months for micro enterprises. |

[[

Each notification is linked, as a PDF, in the list above.

Where a notification shows "Gazette", that links the Gazette of India's copy; ours was checked against it on October 20, 2026.

- [QCO guide](https://indusdesk.com/qco/)

- [All Quality Control Orders](https://indusdesk.com/qco/tracker/)
