[QCO tracker](https://indusdesk.com/qco/tracker/)

# Quality Control Order for steel and steel products under 151 Indian Standards

https://indusdesk.com/qco/tracker/steel-and-steel-products-under-151-indian-standards-so-756/

The Steel and Steel Products (Quality Control) Order, 2024, issued by the Ministry of Steel as S.O. 3716(E), dated August 29, 2024 and published on August 30, 2024, is the order in force. Schedule 1 lists steel and steel products against 151 Indian Standards, from wire, bars, sheets, plates, strips and billets to stainless steel, ferrosilicon, ferronickel and ferromanganese.

Steel and Steel Products (Quality Control) Order, 2024 · Ministry of Steel

IndusDesk · February 19, 2019

The Steel and Steel Products (Quality Control) Order, 2024, issued by the Ministry of Steel as S.O. 3716(E), dated August 29, 2024 and published on August 30, 2024, is the order in force. Schedule 1 lists steel and steel products against 151 Indian Standards, from wire, bars, sheets, plates, strips and billets to stainless steel, ferrosilicon, ferronickel and ferromanganese. Schedule 2 lists seven goods and articles, including transformer stampings, stainless steel pipes and tubes, and containers of tin plate and tin free steel.

Schedule 1 products must conform to their Indian Standard, bear the Standard Mark under a licence from the Bureau of Indian Standards, and carry a Test Certificate bearing the Standard Mark with each consignment. Most standards apply with immediate effect; some have later dates. Products made in India for export to a foreign buyer's specification are excluded. Contraventions are punishable under section 29 of the Bureau of Indian Standards Act, 2016.

S.O. 1673(E) of May 27, 2020 superseded S.O. 756(E), dated February 14, 2020, and listed 111 standards. S.O. 4082(E) of November 12, 2020 superseded S.O. 2379(E), dated July 16, 2020, with 144 standards, and S.O. 4637(E) of December 22, 2020 superseded that with 145. Ministry of Steel orders from 2020 to 2024 extended enforcement dates for individual standards. S.O. 574(E) of February 5, 2024 replaced the 2020 order, and S.O. 3716(E) replaced it.

Two amendments have since suspended enforcement for parts of Schedule 1. S.O. 5134(E) of November 20, 2025 made the entries at 42 serial numbers not operative for 3 years, and at 13 for 1 year, from its publication. S.O. 3300(E), dated June 20, 2026 and published on June 22, 2026, did so for serial numbers 23 and 129 (IS 2879: 1998 and IS 5518: 1996) for 3 years, and for 51, 52 and 53 (IS 5522: 2014, IS 6911: 2017 and IS 15997: 2012) up to March 31, 2027.

**Order**: Steel and Steel Products (Quality Control) Order, 2024

**Issued by**: Ministry of Steel

**Product group**: Steel and Iron Products

**Where it stands**: Amended

**What it requires**: Every steel and steel product in Schedule 1 must conform to the corresponding Indian Standard from the date of implementation given against it in Schedule 1, bear the Standard Mark under a licence from the Bureau of Indian Standards, and be accompanied with each consignment by a Test Certificate bearing the Standard Mark issued by the Bureau of Indian Standards certified manufacturer; sub-standard or defective steel and steel products are to be disposed of as scrap. In Schedule 2, stampings, laminations or cores of transformers must meet the essential requirements under a Certificate of Conformity, and stainless steel pipes and tubes and the listed articles of tin plate and tin free steel must be made from input material bearing the Standard Mark and conforming to the Schedule 1 standards, accompanied by test certificates.

**Certification scheme**: Scheme-I of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018 for Schedule 1 products and for the input material of Schedule 2 serial numbers 2 to 7; Scheme-IV of Schedule-II for the stampings, laminations or cores of transformers at Schedule 2 serial number 1

**Came into force**: Save as otherwise provided, the 2024 order came into force on the date of its publication in the Official Gazette, August 30, 2024. Schedule 1 gives "With immediate effect" for most standards; August 8, 2024 for IS 16732: 2019 and IS 12594: 1988; October 23, 2024 for IS 4409: 2023; November 8, 2024 for IS 1170: 1992, IS 1171: 2011 and IS 1470: 2013; and 6 months from the date of notification for IS 18316: 2023, IS 18384: 2023, IS 18385: 2023, IS 18513: 2023, IS 1469: 1993 and IS 1466: 1985. All Schedule 2 goods are "With immediate effect".

**Exemptions**:

- Steel and steel products manufactured domestically for export which conform to any other specification required by a foreign buyer.

- High strength deformed steel bars and wires of sizes less than 8 mm (excepted from the IS 1786: 2008 entry).

- Bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm) (excepted from the IS 2062: 2011 entry).

- Enforcement not operative for a period of 3 years from the date of publication in the Gazette (S.O. 5134(E), November 20, 2025): IS 5872: 1990 (serial number 24), IS 3975: 1999 (serial number 37), IS 6527: 1995 (serial number 48), IS 4409: 2023 (serial number 55), IS 1812: 1982 (serial number 68), IS 2507: 1975 (serial number 69), IS 3885 Part-1: 1992 (serial number 73), IS 3885 Part-2: 1992 (serial number 74), IS 4223: 1975 (serial number 75), IS 4224: 1972 (serial number 76), IS 4397: 1999 (serial number 77), IS 6902: 1973 (serial number 79), IS 7226: 1974 (serial number 81), IS 7557: 1982 (serial number 82), IS 8052: 2006 (serial number 83), IS 9962: 1981 (serial number 87), IS 14331: 1995 (serial number 88), IS 4882: 1979 (serial number 90), IS 10632 (Part 2): 1983 (serial number 95), IS 10632 (Part 3): 1983 (serial number 96), IS 11169 (Part 2): 1989 (serial number 97), IS 5651: 1987 (serial number 98), IS 9516: 1980 (serial number 99), IS 12045: 1987 (serial number 101), IS 11946: 1987 (serial number 104), IS 11947: 1987 (serial number 105), IS 963: 1958 (serial number 106), IS 4454 (Part 4): 2001 (serial number 107), IS 2589: 1975 (serial number 112), IS 3298: 1981 (serial number 113), IS 4072: 1975 (serial number 114), IS 8510 (Part II): 1977 (serial number 115), IS 8510 (Part III): 1977 (serial number 116), IS 8563: 1977 (serial number 117), IS 8564: 1977 (serial number 118), IS 8565: 1977 (serial number 119), IS 8566: 1977 (serial number 120), IS 9485: 1980 (serial number 123), IS 10794: 1984 (serial number 124), IS 12262: 1988 (serial number 125), IS 1469: 1993 (serial number 150) and IS 1466: 1985 (serial number 151).

- Enforcement not operative for a period of 1 year from the date of publication in the Gazette (S.O. 5134(E), November 20, 2025): IS 6528 :1995 (serial number 49), IS 6603: 2001 (serial number 50), IS 3748: 2022 (serial number 60), IS 16585: 2016 (serial number 64), IS 9476: 1980 (serial number 86), IS 6529: 1996 (serial number 92), IS 9294: 1979 (serial number 93), IS 10631: 1983 (serial number 94), IS 14652: 1999 (serial number 102), IS 4432: 1988 (serial number 128), IS 13387: 1992 (serial number 132), IS 3930: 1994 (serial number 135) and IS 13352: 1992 (serial number 137).

- Enforcement not operative for a period of 3 years from the date of publication in the Gazette (S.O. 3300(E), dated June 20, 2026, published in the Gazette on June 22, 2026): IS 2879: 1998 (serial number 23) and IS 5518: 1996 (serial number 129).

- Enforcement not operative for a period up to March 31, 2027 (S.O. 3300(E), dated June 20, 2026, published in the Gazette on June 22, 2026): IS 5522: 2014 (serial number 51), IS 6911: 2017 (serial number 52) and IS 15997: 2012 (serial number 53).

**Enforcement**: The Bureau of Indian Standards is the certifying and enforcing authority in respect of the steel and steel products and the goods and articles specified in the order. Any person who contravenes any of its provisions is punishable under section 29 of the Bureau of Indian Standards Act, 2016 (11 of 2016).

## The products and their standards

| Product | Indian Standard | Title of the standard | HS code |
|---|---|---|---|
| Specification for plain Hard-drawn Steel Wire for Pre-stressed Concrete; Part 1 Cold - Drawn Stress relieved Wire. | IS 1785 (Part-1): 1983 | Specification for plain Hard-drawn Steel Wire for Pre-stressed Concrete; Part 1 Cold - Drawn Stress relieved Wire. | 72171010, 72179091, 72179099 |
| Plain Hard-drawn Steel Wire for Pre-stressed Concrete; Part 2 as Drawn Wire. | IS 1785 (Part-2): 1983 | Plain Hard-drawn Steel Wire for Pre-stressed Concrete; Part 2 as Drawn Wire. | 72171010, 72179091, 72179099 |
| Indented Wire for Pre-stressed Concrete – Specification. | IS 6003: 2010 | Indented Wire for Pre-stressed Concrete – Specification. | 72171010, 72179091, 72179099 |
| Uncoated Stress Relieved Strand for Pre-stressed Concrete – Specification. | IS 6006: 2014 | Uncoated Stress Relieved Strand for Pre-stressed Concrete – Specification. | 73121030 |
| Fusion Bonded Epoxy Coated Reinforcing Bars – Specification. | IS 13620: 1993 | Fusion Bonded Epoxy Coated Reinforcing Bars – Specification. | 72142090, 72159090 |
| Uncoated Stress Relieved Low Relaxation Seven- wire (Ply) Strand for Pre-stressed Concrete – Specification. | IS 14268: 2022 | Uncoated Stress Relieved Low Relaxation Seven- wire (Ply) Strand for Pre-stressed Concrete – Specification. | 73121030 |
| Galvanized Steel Sheets (Plain and Corrugated) – Specification. | IS 277: 2018 | Galvanized Steel Sheets (Plain and Corrugated) – Specification. | 72104100, 72104900, 72123010, 72123090 |
| Steel plates for pressure vessels for intermediate and high temperature service including boilers. | IS 2002: 2009 | Steel plates for pressure vessels for intermediate and high temperature service including boilers. | 72085110, 72085120, 72085210, 72085220, 72111300, 72111420, 72111490, 72119011, 72119090 |
| Steel Plates for Pressure Vessels Used at Moderate and Low Temperature – Specification. | IS 2041: 2009 | Steel Plates for Pressure Vessels Used at Moderate and Low Temperature – Specification. | 72085110, 72085120, 72085210, 72085220, 72111300, 72111420, 72111490, 72119090 |
| Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes – Specification. | IS 2830: 2012 | Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes – Specification. | 72061090, 72071190, 72071290, 72071920, 72071990 |
| High strength deformed steel bars and wires for concrete reinforcement- Specification except for High strength deformed steel bars and wires of sizes less than 8 mm. | IS 1786: 2008 | High strength deformed steel bars and wires for concrete reinforcement- Specification except for High strength deformed steel bars and wires of sizes less than 8 mm. | 72131090, 72142090 |
| Cold rolled non-oriented electrical steel sheet and strip - Fully processed type- Specification. | IS 648: 2022 | Cold rolled non-oriented electrical steel sheet and strip - Fully processed type- Specification. | 72251920, 72251990, 72261920, 72261990 |
| Grain Oriented Electrical Steel Sheet and Strip. | IS 3024: 2015 | Grain Oriented Electrical Steel Sheet and Strip. | 72251100, 72261100 |
| Cold Rolled Non-Oriented Electrical Steel Sheet and Strip – Semi-Processed Type- Specification. | IS 15391: 2003 | Cold Rolled Non-Oriented Electrical Steel Sheet and Strip – Semi-Processed Type- Specification. | 72091720, 72091730, 72091790, 72251920, 72251990, 72261920, 72261990 |
| Carbon steel billets, blooms, slabs and bars for forgings. | IS 1875: 1992 | Carbon steel billets, blooms, slabs and bars for forgings. | 72071120, 72071190, 72071220, 72071290, 72071910, 72071920, 72071990, 72072010, 72072090, 72149190, 72149990, 72159090, 72249040, 72249091, 72249099, 72283029, 72286099 |
| Steel Chequered Plates. | IS 3502: 2009 | Steel Chequered Plates. | 72081000, 72084010, 72084020, 72084030, 72084040, 72084090, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72119013, 72119090, 72254019, 72259900, 72269130, 72269190, 72269910, 72269990 |
| Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm). | IS 2062: 2011 | Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm). | 72082510, 72082520, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72089000, 72111300, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72119012, 72119090, 72139190, 72139990, 72149190, 72149990, 72161000, 72162100, 72162200, 72163100, 72163200, 72163300, 72164000, 72165000, 73011000, 73012010, 73012090 |
| Specification for Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars. | IS 432 (Part 1): 1982 | Specification for Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars. | 72139190, 72139990, 72149190, 72149990, 72159090, 72279090, 72283019, 72283029, 72286099 |
| Specification for Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire. | IS 432 (Part 2): 1982 | Specification for Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire. | 72171010, 72171020, 72171030, 72179091, 72179099, 72299031, 72299033, 72299040, 72299059, 72299090 |
| Cold reduced carbon steel sheets and strip: Part 1 Cold Forming and Drawing Purpose. | IS 513 (Part 1): 2016 | Cold reduced carbon steel sheets and strip: Part 1 Cold Forming and Drawing Purpose. | 72091510, 72091520, 72091530, 72091590, 72091610, 72091620, 72091630, 72091690, 72091710, 72091720, 72091730, 72091790, 72091810, 72091820, 72091830, 72091890, 72092510, 72092520, 72092530, 72092590, 72092620, 72092630, 72092690, 72092710, 72092720, 72092730, 72092790, 72092810, 72092820, 72092830, 72092890, 72099000, 72112310, 72112320, 72112330, 72112340, 72112350, 72112390, 72112940, 72112950, 72112990, 72119012, 72119090, 72255010, 72255020, 72259900, 72269210, 72269220, 72269920, 72269930, 72269940, 72269952, 72269990 |
| Cold reduced low carbon steel sheets and strip: Part 2 High Tensile and Multi-phase Steel. | IS 513 (Part 2): 2016 | Cold reduced low carbon steel sheets and strip: Part 2 High Tensile and Multi-phase Steel. | 72091510, 72091520, 72091530, 72091590, 72091610, 72091620, 72091630, 72091690, 72091710, 72091720, 72091730, 72091790, 72091810, 72091820, 72091830, 72091890, 72092510, 72092520, 72092530, 72092590, 72092620, 72092630, 72092690, 72092710, 72092720, 72092730, 72092790, 72092810, 72092820, 72092830, 72092890, 72099000, 72112310, 72112320, 72112330, 72112340, 72112350, 72112390, 72112940, 72112950, 72112990, 72119090, 72255010, 72255020, 72259900, 72269210, 72269220, 72269920, 72269930, 72269940, 72269952, 72269990 |
| Hot Rolled Carbon Steel Sheet, Plate and Strip. | IS 1079: 2017 | Hot Rolled Carbon Steel Sheet, Plate and Strip. | 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72084010, 72084020, 72084030, 72084040, 72084090, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72089000, 72111300, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72111910, 72111920, 72111930, 72111940, 72111950, 72111960, 72111990, 72119090, 72253010, 72253090, 72254011, 72254012, 72254013, 72254019, 72254020, 72254030, 72259900, 72269110, 72269120, 72269130, 72269190, 72269910, 72269920, 72269930, 72269940, 72269951, 72269952, 72269953, 72269960, 72269990 |
| Mild steel for metal arc welding electrodes. | IS 2879: 1998 | Mild steel for metal arc welding electrodes. | 72132010, 72132090, 72139110, 72139190, 72139910, 72139990, 72179092, 72179099 |
| Cold Rolled Steel Strips (Box Strappings). | IS 5872: 1990 | Cold Rolled Steel Strips (Box Strappings). | 72112350, 72112390, 72112950, 72112990, 72125090, 72262030, 72269210, 72269930, 72269952, 72269990 |
| Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes. | IS 5986: 2017 | Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes. | 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72084010, 72084020, 72084030, 72084040, 72084090, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72089000, 72111300, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72111910, 72111920, 72111930, 72111940, 72111950, 72111960, 72111990, 72119012, 72119090, 72253090, 72254013, 72254019, 72254020, 72254030, 72259900, 72269110, 72269120, 72269130, 72269190, 72269910, 72269920, 72269930, 72269940, 72269951, 72269952, 72269953, 72269960, 72269990 |
| Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low-Pressure Liquefiable Gas Cylinders. | IS 6240: 2008 | Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low-Pressure Liquefiable Gas Cylinders. | 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72089000, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72111910, 72111920, 72111930, 72111940, 72111950, 72111960, 72111990, 72119090, 72253090, 72254012, 72254013, 72254019, 72254020, 72254030, 72259900, 72269110, 72269120, 72269130, 72269190, 72269910, 72269920, 72269930, 72269940, 72269951, 72269953, 72269990 |
| Hot Rolled bars for production of bright bars and machined parts for engineering applications. | IS 7283: 1992 | Hot Rolled bars for production of bright bars and machined parts for engineering applications. | 72131010, 72131090, 72132010, 72132020, 72132090, 72139110, 72139120, 72139190, 72139910, 72139920, 72139990, 72141010, 72141090, 72143000, 72149110, 72149190, 72149910, 72149990, 72155010, 72155090, 72159010, 72159020, 72159090, 72271000, 72272000, 72279010, 72279020, 72279030, 72279040, 72279050, 72279060, 72279090, 72281010, 72281090, 72282000, 72283011, 72283019, 72283021, 72283022, 72283023, 72283029, 72284000, 72285010, 72285090, 72286091, 72286092, 72286093, 72286099 |
| Mild steel wire rods for general engineering purposes. | IS 7887: 1992 | Mild steel wire rods for general engineering purposes. | 72139190, 72139990, 72279090 |
| Hot Rolled Steel Strip for Welded Tubes and Pipes. | IS 10748: 2004 | Hot Rolled Steel Strip for Welded Tubes and Pipes. | 72082540, 72082590, 72082640, 72082690, 72082740, 72082790, 72083640, 72083690, 72083740, 72083790, 72083840, 72083890, 72083940, 72083990, 72085240, 72085290, 72085340, 72085390, 72085440, 72085490, 72089000, 72111450, 72111460, 72111490, 72111950, 72111960, 72111990, 72119090, 72253090, 72259900, 72269110, 72269120, 72269130, 72269190, 72269910, 72269920, 72269930, 72269940, 72269951, 72269952, 72269953, 72269960, 72269990 |
| Hot Rolled Carbon Steel Strip for Cold Rolling Purposes. | IS 11513: 2017 | Hot Rolled Carbon Steel Strip for Cold Rolling Purposes. | 72082540, 72082590, 72082640, 72082690, 72082740, 72082790, 72083640, 72083690, 72083740, 72083790, 72083840, 72083890, 72083940, 72083990, 72089000, 72111450, 72111460, 72111490, 72111950, 72111960, 72111990, 72119090, 72253090, 72259900, 72269110, 72269120, 72269130, 72269190, 72269910, 72269920, 72269930, 72269940, 72269951, 72269952, 72269953, 72269960, 72269990 |
| Hot rolled steel narrow width strip for welded tubes and pipes. | IS 15647: 2006 | Hot rolled steel narrow width strip for welded tubes and pipes. | 72111300, 72111450, 72111460, 72111490, 72111950, 72111960, 72111990, 72119090 |
| High Carbon Steel Wire Rods – Specification. | IS 7904: 2018 | High Carbon Steel Wire Rods – Specification. | 72139190, 72139990 |
| Continuously pre-painted galvanized steel sheets and coils. | IS 14246: 2013 | Continuously pre-painted galvanized steel sheets and coils. | 72107000, 72109090, 72124000, 72259200, 72259900 |
| Pre–painted aluminium zinc alloy metallic coated steel strip and sheet (plain). | IS 15965: 2012 | Pre–painted aluminium zinc alloy metallic coated steel strip and sheet (plain). | 72107000, 72109090, 72124000, 72259200, 72259900 |
| Mild steel wire for General Engineering purposes. | IS 280: 2006 | Mild steel wire for General Engineering purposes. | 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72173010, 72173020, 72173030 |
| Round steel wire for ropes. | IS 1835: 1976 | Round steel wire for ropes. | 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72179091, 72179099, 72299033, 72299040 |
| Low carbon Galvanized steel wires, formed wires and Tapes for armouring of cables. | IS 3975: 1999 | Low carbon Galvanized steel wires, formed wires and Tapes for armouring of cables. | 72172010, 72172020, 72172030, 72179011, 72179012, 72179013, 72179019, 72179091, 72179092, 72179093, 72179099 |
| Alloy Steel billets, blooms and slabs for forging for general engineering purposes. | IS 4368: 1967 | Alloy Steel billets, blooms and slabs for forging for general engineering purposes. | 72249091, 72249099 |
| Steel wires for mechanical springs, Part 1 cold drawn unalloyed steel wire. | IS 4454 (Part 1): 2001 | Steel wires for mechanical springs, Part 1 cold drawn unalloyed steel wire. | 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72173010, 72173020, 72173030, 72179091, 72179099 |
| Steel wire for mechanical springs Part 2: oil hardened and tempered steel wire. | IS 4454 (Part 2): 2001 | Steel wire for mechanical springs Part 2: oil hardened and tempered steel wire. | 72171010, 72171020, 72171030, 72179091, 72179099, 72292000, 72299032, 72299033, 72299034, 72299040, 72299090 |
| Bead Wires for Tyres. | IS 4824: 2022 | Bead Wires for Tyres. | 72171010, 72171020, 72171030, 72173010, 72173020, 72173030, 72179091, 72179099 |
| Steels for Cold Heading/ Cold extrusion application Part-1 Wrought carbon and low alloy steels. | IS 11169 (Part 1): 2022 | Steels for Cold Heading/ Cold extrusion application Part-1 Wrought carbon and low alloy steels. | 72132020, 72139120, 72139920, 72141090, 72149110, 72149990, 72171010, 72171020, 72171030, 72279040, 72279090, 72283029, 72284000, 72286012, 72286099, 72299040, 72299090 |
| Structural Weather resistant steel. | IS 11587: 1986 | Structural Weather resistant steel. | 72081000, 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72084010, 72084020, 72084030, 72084040, 72084090, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72089000, 72091510, 72091520, 72091530, 72091590, 72091610, 72091620, 72091630, 72091690, 72091710, 72091720, 72091730, 72091790, 72091810, 72091820, 72091830, 72091890, 72092510, 72092520, 72092530, 72092590, 72092620, 72092630, 72092690, 72092710, 72092720, 72092730, 72092790, 72092810, 72092820, 72092830, 72092890, 72099000, 72111300, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72111910, 72111920, 72111930, 72111940, 72111950, 72111960, 72111990, 72121010, 72121090, 72122010, 72122090, 72123010, 72123090, 72124000, 72125010, 72125020, 72125090, 72126000, 72141090, 72149190, 72149990, 72161000, 72162100, 72162200, 72163100, 72163200, 72163300, 72164000, 72165000, 72166100, 72166900, 72169100, 72169910, 72169920, 72169930, 72169940, 72169990, 72253090, 72254019, 72254020, 72254030, 72255010, 72255020, 72255030, 72269110, 72269120, 72269130, 72269190, 72269210, 72269220, 72269230, 72269910, 72269920, 72269930, 72269940, 72269951, 72269952, 72269990, 72279090, 72287011, 72287012, 72287021, 72287022 |
| Fire resistant steel – Specification. | IS 15103: 2002 | Fire resistant steel – Specification. | 72081000, 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72084010, 72084020, 72084030, 72084040, 72084090, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72089000, 72091510, 72091520, 72091530, 72091590, 72091610, 72091620, 72091630, 72091690, 72091710, 72091720, 72091730, 72091790, 72091810, 72091820, 72091830, 72091890, 72092510, 72092520, 72092530, 72092590, 72092620, 72092630, 72092690, 72092710, 72092720, 72092730, 72092790, 72092810, 72092820, 72092830, 72092890, 72099000, 72111300, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72111910, 72111920, 72111930, 72111940, 72111950, 72111960, 72111990, 72121010, 72121090, 72122010, 72122090, 72123010, 72123090, 72124000, 72125010, 72125020, 72125090, 72126000, 72141090, 72149190, 72149990, 72161000, 72162100, 72162200, 72163100, 72163200, 72163300, 72164000, 72165000, 72166100, 72166900, 72169100, 72169910, 72169920, 72169930, 72169940, 72169990, 72253090, 72254019, 72254020, 72254030, 72255010, 72255020, 72255030, 72269110, 72269120, 72269130, 72269190, 72269210, 72269220, 72269230, 72269910, 72269920, 72269930, 72269940, 72269951, 72269952, 72269990, 72279090, 72287011, 72287012, 72287021, 72287022 |
| High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. | IS 15914: 2011 | High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. | 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72084010, 72084020, 72084030, 72084040, 72084090, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72091510, 72091520, 72091530, 72091590, 72091610, 72091620, 72091630, 72091690, 72091710, 72091720, 72091730, 72091790, 72091810, 72091820, 72091830, 72091890, 72092510, 72092520, 72092530, 72092590, 72092620, 72092630, 72092690, 72092710, 72092720, 72092730, 72092790, 72092810, 72092820, 72092830, 72092890, 72099000, 72111300, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72111910, 72111920, 72111930, 72111940, 72111950, 72111960, 72111990, 72253090, 72254019, 72254020, 72254030, 72255010, 72255020, 72255030, 72269110, 72269120, 72269130, 72269190, 72269910, 72269920, 72269930, 72269940, 72269951, 72269952, 72269990 |
| Hot Dip aluminium – Zinc alloy metallic coated steel strip and sheet (plain). | IS 15961: 2012 | Hot Dip aluminium – Zinc alloy metallic coated steel strip and sheet (plain). | 72106100, 72106900, 72123090, 72125090, 72259200, 72259900 |
| Structural Steel for Building for Structures with improved seismic Resistance. | IS 15962: 2012 | Structural Steel for Building for Structures with improved seismic Resistance. | 72084010, 72084020, 72084030, 72084040, 72084090, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72111300, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72111910, 72111920, 72111930, 72111940, 72111950, 72111960, 72111990, 72119090, 72141090, 72149190, 72149990, 72161000, 72162100, 72162200, 72163100, 72163200, 72163300, 72164000, 72165000, 72166100, 72166900, 72169100, 72169910, 72169920, 72169930, 72169940, 72169990, 72255030, 72259900, 72269110, 72269120, 72269130, 72269190, 72287011, 72287012, 72287021, 72287022 |
| Stainless Steel Wire Rod. | IS 6527: 1995 | Stainless Steel Wire Rod. | 72210011, 72210012, 72210019, 72210090, 72221191, 72221192, 72221199, 72221991, 72221992, 72221999, 72222091, 72222092, 72222099, 72223091, 72223092, 72223099 |
| Stainless Steel Wires. | IS 6528 :1995 | Stainless Steel Wires. | 72230091, 72230092, 72230099 |
| Stainless Steel Bars and Flats. | IS 6603: 2001 | Stainless Steel Bars and Flats. | 72221111, 72221112, 72221119, 72221191, 72221192, 72221199, 72221911, 72221912, 72221919, 72221991, 72221992, 72221999, 72222011, 72222012, 72222019, 72222091, 72222092, 72222099, 72223011, 72223012, 72223019, 72223091, 72223092, 72223099 |
| Stainless steel sheets and strips for utensils – Specification. | IS 5522: 2014 | Stainless steel sheets and strips for utensils – Specification. | 72191300, 72191400, 72192310, 72192320, 72192390, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72192490, 72193210, 72193220, 72193290, 72193310, 72193320, 72193390, 72193410, 72193420, 72193490, 72193510, 72193520, 72193590, 72199012, 72199013, 72199090, 72201290, 72202090, 72209090 |
| Stainless steel plate, sheet and strip – Specification. | IS 6911: 2017 | Stainless steel plate, sheet and strip – Specification. | 72191111, 72191112, 72191190, 72191200, 72191300, 72191400, 72192111, 72192112, 72192121, 72192122, 72192131, 72192132, 72192141, 72192142, 72192190, 72192211, 72192212, 72192219, 72192291, 72192292, 72192299, 72192310, 72192320, 72192390, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72192490, 72193111, 72193112, 72193121, 72193122, 72193190, 72193210, 72193220, 72193290, 72193310, 72193320, 72193390, 72193410, 72193420, 72193490, 72193510, 72193520, 72193590, 72199011, 72199012, 72199013, 72199090, 72201110, 72201121, 72201122, 72201129, 72201190, 72201210, 72201221, 72201222, 72201229, 72201290, 72202010, 72202021, 72202022, 72202029, 72202090, 72209010, 72209021, 72209022, 72209029, 72209090 |
| Low Nickel Austenitic Stainless-Steel Sheet and Strip for Utensils and Kitchen Appliances – Specification. | IS 15997: 2012 | Low Nickel Austenitic Stainless-Steel Sheet and Strip for Utensils and Kitchen Appliances – Specification. | 72191300, 72191400, 72192320, 72192390, 72192421, 72192422, 72192423, 72192429, 72192490, 72193220, 72193290, 72193320, 72193390, 72193420, 72193490, 72193520, 72193590, 72199012, 72199013, 72199090, 72201290, 72202090, 72209090 |
| Ferrosilicon – Specification. | IS 1110: 1990 | Ferrosilicon – Specification. | 72022100, 72022900 |
| Specification for Ferronickel. | IS 4409: 2023 | Specification for Ferronickel. | 72026000 |
| Specification for Hot rolled steel strip (bailing). | IS 1029: 1970 | Specification for Hot rolled steel strip (bailing). | 72111450, 72111460, 72111490, 72111950, 72111960, 72111990, 72269951, 72269990 |
| Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate. | IS 2385: 1977 | Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate. | 72082530, 72082540, 72082590, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72253090, 72259900 |
| Specification for Structural steel for construction of hulls of ships. | IS 3039: 1988 | Specification for Structural steel for construction of hulls of ships. | 72084010, 72084020, 72084030, 72084040, 72084090, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72089000, 72111300, 72111410, 72111420, 72111490, 72111910, 72111920, 72111990, 72119013, 72119090, 72141090, 72149110, 72149190, 72149990, 72155090, 72159090, 72161000, 72162100, 72162200, 72163100, 72163200, 72163300, 72164000, 72165000, 72166100, 72166900, 72169100, 72169910, 72169920, 72169930, 72169940, 72169990 |
| Bright steel bars – Specification. | IS 9550: 2001 | Bright steel bars – Specification. | 72149110, 72149190, 72151000, 72155010, 72155090, 72210011, 72210012, 72210019, 72210090, 72211111, 72211112, 72211119, 72211191, 72211192, 72211199, 72211911, 72211912, 72211919, 72211991, 72211992, 72211999, 72222011, 72222012, 72222019, 72222091, 72222092, 72222099, 72223011, 72223012, 72223019, 72223091, 72223092, 72223099, 72281010, 72281090, 72283011, 72283019, 72283021, 72283022, 72283023, 72283024, 72283029, 72286011, 72286012, 72286091, 72286092, 72286093, 72286094, 72286099 |
| Tool Steels – Specification. | IS 3748: 2022 | Tool Steels – Specification. | 72141090, 72149190, 72149990, 72155090, 72159090, 72241000, 72249010, 72249030, 72249040, 72249091, 72249099, 72253090, 72255010, 72255020, 72255030, 72259900, 72262011, 72262012, 72262021, 72262022, 72262030, 72271000, 72272000, 72279090, 72281010, 72281090, 72283011, 72283019, 72283024, 72283029, 72284000, 72285090, 72286011, 72286012, 72286094, 72286099, 72287011, 72287012, 72287021, 72287022, 72288010, 72288020, 72288090 |
| Steel for hardening and tempering – Specification. | IS 5517: 1993 | Steel for hardening and tempering – Specification. | 72084090, 72085190, 72085290, 72089000, 72149190, 72149990, 72299034, 72299090, 73261910, 73261990 |
| Specification for Steel for valves for Internal Combustion Engines | IS 7494: 1981 | Specification for Steel for valves for Internal Combustion Engines | 72141090, 72149110, 72149190, 72149990, 72159090, 72279090, 72281090, 72283019, 72283029, 72284000, 72285010, 72285090, 72286012, 72286099 |
| Specification for Carbon manganese steel forgings for pressure vessels. | IS 12146: 1987 | Specification for Carbon manganese steel forgings for pressure vessels. | 72084090, 72085190, 72085290, 72089000, 72149190, 72149990 |
| Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state. | IS 16585: 2016 | Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state. | 72251910, 72251920, 72251990, 72261990, 72269930, 72269990 |
| Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification. | IS 2831: 2012 | Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification. | 72061090, 72071190, 72071290, 72071910, 72071920, 72071990, 72072090 |
| Steel Rivet Bars (medium And High Tensile) – For Structural Purposes. | IS 1148: 2009 | Steel Rivet Bars (medium And High Tensile) – For Structural Purposes. | 72149990, 72286099 |
| Specification for Mild Steel Wire, Cold Heading Quality. | IS 1673: 1984 | Specification for Mild Steel Wire, Cold Heading Quality. | 72179019, 72179091, 72179099 |
| Specification for Carbon Steel Wire for the Manufacture of Wood Screws. | IS 1812: 1982 | Specification for Carbon Steel Wire for the Manufacture of Wood Screws. | 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72179019, 72179091, 72179099, 72299031, 72299033, 72299059, 72299090 |
| Specification for Cold – rolled Steel Strips for Springs. | IS 2507: 1975 | Specification for Cold – rolled Steel Strips for Springs. | 72091510, 72091520, 72091530, 72091590, 72091610, 72091620, 72091630, 72091690, 72091710, 72091720, 72091730, 72091790, 72091810, 72091820, 72091830, 72091890, 72092510, 72092520, 72092530, 72092820, 72092830, 72092890, 72099000, 72112310, 72112320, 72112330, 72112340, 72112350, 72112390, 72112910, 72112920, 72112930, 72112940, 72112950, 72112960, 72112990, 72119090, 72255010, 72255020, 72255030, 72259900, 72269210, 72269220, 72269230, 72269910, 72269920, 72269930, 72269940, 72269952, 72269953, 72269990 |
| Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process). | IS 2255: 1977 | Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process). | 72132020, 72139120, 72139920 |
| Steel For the Manufacture of Volute and Helical Springs (for Railway Rolling Stock) – Specification. | IS 3195: 1992 | Steel For the Manufacture of Volute and Helical Springs (for Railway Rolling Stock) – Specification. | 72141010, 72141090, 72142010, 72149190, 72149910, 72149990, 72283019, 72283022, 72283029, 72285090, 72286092, 72286099 |
| Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension. | IS 3431: 1982 | Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension. | 72141010, 72141090, 72142010, 72149190, 72149910, 72149990, 72282000, 72283019, 72283022, 72283029, 72285090, 72286092, 72286099 |
| Steel for the manufacture of laminated springs (railway rolling stock) Part 1: Flat Sections – Specification. | IS 3885 Part-1: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 1: Flat Sections – Specification. | 72149190, 72149910, 72149990, 72283019, 72283022, 72283029, 72285090, 72286092, 72286099 |
| Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification. | IS 3885 Part-2: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification. | 72142010, 72149190, 72149910, 72149990, 72283019, 72283022, 72283029, 72285090, 72286092, 72286099 |
| Specification for Steel Wire for Umbrella Ribs. | IS 4223: 1975 | Specification for Steel Wire for Umbrella Ribs. | 72171010, 72172010, 72179091, 72179099 |
| Specification for Steel Wire for Staples, Pins and Clips. | IS 4224: 1972 | Specification for Steel Wire for Staples, Pins and Clips. | 72171020, 72171030, 72179099, 72299033, 72299052, 72299059, 72299090 |
| Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification. | IS 4397: 1999 | Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification. | 72091510, 72091520, 72091530, 72091590, 72091610, 72091620, 72091630, 72091690, 72091710, 72091720, 72091730, 72091790, 72091810, 72091820, 72091830, 72091890, 72092510, 72092520, 72092530, 72092590, 72092620, 72092630, 72092690, 72092710, 72092720, 72092730, 72092790, 72092810, 72092820, 72092830, 72092890, 72099000, 72112310, 72112320, 72112330, 72112340, 72112350, 72112390, 72112910, 72112920, 72112930, 72112940, 72112950, 72112960, 72112990, 72119090 |
| Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification. | IS 4398: 1994 | Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification. | 72249091, 72249099, 72279030, 72279090, 72283019, 72283029, 72284000, 72285090, 72286012, 72286099, 72299059, 72299090 |
| Specification for Steel Wire for spokes. | IS 6902: 1973 | Specification for Steel Wire for spokes. | 72171010, 72172010, 72179019, 72179091, 72179099, 72299033, 72299034, 72299040, 72299059, 72299090 |
| Specification for Steel for Electrically welded round Link Chains. | IS 6967: 1973 | Specification for Steel for Electrically welded round Link Chains. | 72071120, 72071190, 72071220, 72071290, 72071920, 72071990, 72072010, 72072090, 72141090, 72142090, 72149190, 72149990, 72249091, 72249099, 72284000, 72285090, 72286099 |
| Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes. | IS 7226: 1974 | Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes. | 72112310, 72112320, 72112330, 72112340, 72112350, 72112390, 72112910, 72112920, 72112930, 72112940, 72112950, 72112960, 72269210, 72269930, 72269952, 72269990 |
| Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets. | IS 7557: 1982 | Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets. | 72139120, 72139190, 72139920, 72139990, 72149990, 72171010, 72179019, 72179091, 72179099, 72279040, 72279090, 72284000, 72285090, 72286099, 72299033, 72299040, 72299059, 72299090 |
| Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification. | IS 8052: 2006 | Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification. | 72071120, 72071190, 72071220, 72071290, 72071920, 72071990, 72072010, 72072090, 72241000, 72249091, 72249099 |
| Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification. | IS 8951: 2001 | Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification. | 72061020, 72061090, 72241000, 72249091, 72249099 |
| Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification. | IS 8952: 1995 | Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification. | 72071190, 72071290, 72071920, 72071990, 72072090 |
| Specification for Cold rolled steel strips for carbon steel razor blades. | IS 9476: 1980 | Specification for Cold rolled steel strips for carbon steel razor blades. | 72119090, 72269210, 72269930, 72269952, 72269990 |
| Specification for Steel Wire for Needles. | IS 9962: 1981 | Specification for Steel Wire for Needles. | 72171010, 72171020, 72171030, 72179019, 72179091, 72179099 |
| Steels for High Temperature Bolting Applications – Specification. | IS 14331: 1995 | Steels for High Temperature Bolting Applications – Specification. | 72282000, 72283019, 72283029, 72284000 |
| Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re-rolling purposes- Specification. | IS 14650: 1999 | Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re-rolling purposes- Specification. | 72061010, 72061020, 72061090, 72069099, 72071110, 72071120, 72071130, 72071190, 72071210, 72071220, 72071230, 72071290, 72071910, 72071920, 72071990, 72072010, 72072020, 72072030, 72072090, 72241000, 72249010, 72249020, 72249030, 72249091, 72249099 |
| Specification for Low Carbon Steel Wire for Rivets for Use in Bearing Industry. | IS 4882: 1979 | Specification for Low Carbon Steel Wire for Rivets for Use in Bearing Industry. | 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72173010, 72173020, 72173030, 72179019, 72179091, 72179099, 72299031, 72299033, 72299040, 72299052, 72299059, 72299090 |
| Specification For High Tensile Steel Bars Used in Pre-stressed Concrete. | IS 2090: 1983 | Specification For High Tensile Steel Bars Used in Pre-stressed Concrete. | 72149990, 72283029, 72286099 |
| Stainless Steel Blooms Billets and Slabs for Forging. | IS 6529: 1996 | Stainless Steel Blooms Billets and Slabs for Forging. | 72181000, 72189100, 72189910, 72189990 |
| Cold-Rolled Stainless-Steel Strips for Razor Blades. | IS 9294: 1979 | Cold-Rolled Stainless-Steel Strips for Razor Blades. | 72202021, 72202022, 72202029, 72202090, 72209021, 72209022, 72209029, 72209090 |
| Stainless steel for welding electrode core wire. | IS 10631: 1983 | Stainless steel for welding electrode core wire. | 72181000, 72189100, 72189910, 72189990, 72210090, 72222011, 72222012, 72222019, 72222091, 72222092, 72222099, 72230010, 72230091, 72230092, 72230099 |
| Specification for Non-Magnetic stainless steels for electrical applications: Part 2 Specific requirements for binding wire. | IS 10632 (Part 2): 1983 | Specification for Non-Magnetic stainless steels for electrical applications: Part 2 Specific requirements for binding wire. | 72230091, 72230092, 72230099 |
| Specifications for Non-Magnetic stainless steels for electrical applications: Part 3 Specific requirements for sheets, strips and plates. | IS 10632 (Part 3): 1983 | Specifications for Non-Magnetic stainless steels for electrical applications: Part 3 Specific requirements for sheets, strips and plates. | 72191111, 72191112, 72191190, 72191200, 72191300, 72191400, 72192111, 72192112, 72192121, 72192122, 72192131, 72192132, 72192141, 72192142, 72192190, 72192211, 72192212, 72192219, 72192291, 72192292, 72192299, 72192310, 72192320, 72192390, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72192490, 72193111, 72193112, 72193121, 72193122, 72193190, 72193210, 72193220, 72193290, 72193310, 72193320, 72193390, 72193410, 72193420, 72193490, 72193510, 72193520, 72193590, 72199011, 72199012, 72199013, 72199090, 72201110, 72201121, 72201122, 72201129, 72201190, 72201210, 72201221, 72201222, 72201229, 72201290, 72202010, 72202021, 72202022, 72202029, 72202090, 72209010, 72209021, 72209022, 72209029, 72209090 |
| Steels for cold heading/ cold extrusion applications – specification: Part 2 Stainless steel. | IS 11169 (Part 2): 1989 | Steels for cold heading/ cold extrusion applications – specification: Part 2 Stainless steel. | 72222011, 72222012, 72222019, 72222091, 72222092, 72222099, 72223011, 72223012, 72223019, 72223091, 72223092, 72223099, 72224010, 72224020 |
| Steels for Pneumatic Tools. | IS 5651: 1987 | Steels for Pneumatic Tools. | 72241000, 72249010, 72249020, 72249030, 72249040, 72249091, 72249099, 72283024, 72286094, 72288010, 72288020, 72288090 |
| Heat Resisting Steel. | IS 9516: 1980 | Heat Resisting Steel. | 72089000, 72099000, 72109090, 72119090, 72149990, 72192111, 72192112, 72192121, 72192122, 72192211, 72192212, 72192219 |
| Steels For Piston Pins (gudgeon Pins). | IS 11952: 1986 | Steels For Piston Pins (gudgeon Pins). | 72286012 |
| Alloys Used in Electrical Resistance Metallic Heating Elements. | IS 12045: 1987 | Alloys Used in Electrical Resistance Metallic Heating Elements. | 72201190, 72201290, 72202090, 72209090, 72210090, 72217222, 72230091, 72230092, 72230099, 72299060 |
| 18 Percent Nickel Maraging Steel Bars and Rods. | IS 14652: 1999 | 18 Percent Nickel Maraging Steel Bars and Rods. | 72210012, 72210019, 72210090, 72221112, 72221119, 72221192, 72221199, 72221912, 72221919, 72221992, 72221999, 72222012, 72222019, 72222092, 72222099, 72223012, 72223092, 72279090 |
| Specification for Hard-drawn Steel Wire Fabric for Concrete Reinforcement. | IS 1566: 1982 | Specification for Hard-drawn Steel Wire Fabric for Concrete Reinforcement. | 72171010, 72179091, 72179099 |
| Soft Magnetic Iron Strips. | IS 11946: 1987 | Soft Magnetic Iron Strips. | 72091530, 72091630, 72091730, 72091830, 72092530, 72092630, 72092730, 72092830, 72099000, 72112350, 72112950, 72255010, 72255020, 72255030, 72259900, 72269210, 72269220, 72269230, 72269910, 72269920, 72269930, 72269940, 72269952, 72269990 |
| Soft Magnetic Iron Rods, Bars, Flats and Sections. | IS 11947: 1987 | Soft Magnetic Iron Rods, Bars, Flats and Sections. | 72155090, 72159090, 72161000, 72162100, 72162200, 72163100, 72163200, 72163300, 72164000, 72165000, 72166100, 72166900, 72169100, 72169930, 72169940, 72169990, 72285090, 72286012, 72286099, 72287011, 72287012, 72287021, 72287022, 72288090 |
| Chrome molybdenum steel bars and rods for aircraft purposes. | IS 963: 1958 | Chrome molybdenum steel bars and rods for aircraft purposes. | 72141090, 72149110, 72149190, 72149990, 72155010, 72155090, 72159090, 72221111, 72221119, 72221191, 72221199, 72221911, 72221919, 72221991, 72221999, 72222011, 72222019, 72222091, 72222099, 72223011, 72223019, 72223091, 72223099, 72283019, 72283029, 72284000, 72285090, 72286012, 72286099 |
| Steel Wires for Mechanical Springs - Part 4: Stainless Steel Wire. | IS 4454 (Part 4): 2001 | Steel Wires for Mechanical Springs - Part 4: Stainless Steel Wire. | 72230091, 72230092, 72230099 |
| Cold-reduced Electrolytic Tin Plate. | IS 1993: 2018 | Cold-reduced Electrolytic Tin Plate. | 72101110, 72101190, 72101210, 72101290, 72107000, 72109010, 72109090, 72121010, 72121090, 72124000 |
| Cold reduced electrolytic chromium / Chromium oxide – coated steel. | IS 12591: 2018 | Cold reduced electrolytic chromium / Chromium oxide – coated steel. | 72105000, 72125090 |
| Specification for Expanded Metal Steel Sheets for General Purposes. | IS 412: 1975 | Specification for Expanded Metal Steel Sheets for General Purposes. | 72083830, 72083930, 72085330, 72085340, 72085390, 72085430, 72085440, 72085490, 72089000, 72091520, 72091530, 72091590, 72091620, 72091630, 72091690, 72091720, 72091730, 72091790, 72091820, 72091830, 72091890, 72092520, 72092530, 72092590, 72092620, 72092630, 72092690, 72092720, 72092730, 72092790, 72099000 |
| Specification for Steel Billets, Bars and Sections for Boilers. | IS 2100: 1970 | Specification for Steel Billets, Bars and Sections for Boilers. | 72071120, 72071190, 72071220, 72071290, 72071910, 72071920, 72071990, 72072010, 72072090, 72119011, 72119090, 72141090, 72142090, 72149110, 72149190, 72149990, 72155010, 72155090, 72159090, 72241000, 72249040, 72249091, 72249099, 72254011, 72283029, 72284000, 72285090, 72286099, 72287011, 72287012, 72287021, 72287022 |
| Specification for Hard Drawn Steel Wire for Upholstery Springs. | IS 2589: 1975 | Specification for Hard Drawn Steel Wire for Upholstery Springs. | 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72173010, 72173020, 72173030, 72179099, 72292000, 72299011, 72299012, 72299013, 72299014, 72299015, 72299016, 72299031, 72299032, 72299033, 72299034, 72299040, 72299051, 72299052, 72299053, 72299054, 72299059, 72299070, 72299090 |
| Specification for Mild Steel Rivet Bars for Ship Building. | IS 3298: 1981 | Specification for Mild Steel Rivet Bars for Ship Building. | 72071120, 72071190, 72071220, 72071290, 72071910, 72071920, 72071990, 72072010, 72072090, 72141090, 72142090, 72149110, 72149190, 72149990, 72155010, 72155090, 72159090, 72249099, 72283019, 72283029, 72284000, 72285090, 72286099, 72287011, 72287012, 72287021, 72287022 |
| Specification for Steel for Spring Washers. | IS 4072: 1975 | Specification for Steel for Spring Washers. | 72141010, 72142010, 72149910, 72149990, 72253010, 72269953, 72279020, 72283022, 72283029, 72286092, 72286099, 72288090, 72299032, 72299040 |
| Specification for Tinned Steel Wire for Banding of Armatures and Rotors: Part II Specific Requirements for magnetic banding wires. | IS 8510 (Part II): 1977 | Specification for Tinned Steel Wire for Banding of Armatures and Rotors: Part II Specific Requirements for magnetic banding wires. | 72173010, 72173020, 72173030, 72179099, 72299011 |
| Specification for Tinned Steel Wire for Banding of Armatures and Rotors: Part III Specific Requirements for non-magnetic banding wires. | IS 8510 (Part III): 1977 | Specification for Tinned Steel Wire for Banding of Armatures and Rotors: Part III Specific Requirements for non-magnetic banding wires. | 72173010, 72173020, 72173030, 72179099, 72299011 |
| Specification for Half Round Mild Steel Wire for The Manufacture of Split Pins. | IS 8563: 1977 | Specification for Half Round Mild Steel Wire for The Manufacture of Split Pins. | 72179011, 72299014, 72299051, 72299090 |
| Specification for Steel Wire for Nipples for Spokes. | IS 8564: 1977 | Specification for Steel Wire for Nipples for Spokes. | 72171010, 72171020, 72171030, 72179019, 72179091, 72179099, 72292000, 72299031, 72299032, 72299033, 72299034, 72299040, 72299059, 72299090 |
| Specification for Heald Wire. | IS 8565: 1977 | Specification for Heald Wire. | 72171010, 72171020, 72171030, 72179019, 72179091, 72179099, 72292000, 72299031, 72299032, 72299033, 72299034, 72299040, 72299051, 72299052, 72299059, 72299090 |
| Specification for Steel Wire for Reeds. | IS 8566: 1977 | Specification for Steel Wire for Reeds. | 72171010, 72171020, 72171030, 72179019, 72179091, 72179099, 72292000, 72299031, 72299032, 72299033, 72299034, 72299040, 72299059, 72299090 |
| Specification for Steel Plates for Galvanizing Pots. | IS 8917: 1978 | Specification for Steel Plates for Galvanizing Pots. | 72082510, 72082610, 72082620, 72082710, 72082720, 72083610, 72083620, 72083710, 72083720, 72083810, 72083820, 72083910, 72083920, 72084010, 72084020, 72085110, 72085120, 72085210, 72085220, 72085310, 72085320, 72085410, 72085420, 72089000, 72091510, 72091610, 72091710, 72091790, 72091810, 72091890, 72092510, 72092590, 72092610, 72092690, 72092710, 72092790, 72092810, 72099000, 72111300, 72111420, 72111490, 72111920, 72111990, 72112320, 72112390, 72112920, 72112990, 72119090 |
| Specification for Hot -Rolled Steel Plates, Sheets and Strips for Manufacture of Agricultural Tillage Discs. | IS 9442: 1980 | Specification for Hot -Rolled Steel Plates, Sheets and Strips for Manufacture of Agricultural Tillage Discs. | 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72084010, 72084020, 72084040, 72084090, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72089000, 72111300, 72111420, 72111440, 72111450, 72111490, 72129012, 72129013, 72129090, 72191111, 72191112, 72191190, 72192111, 72192112, 72192121, 72192122, 72192131, 72192132, 72192141, 72192142, 72192190, 72192211, 72192212, 72192219, 72192291, 72192292, 72192299, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72193111, 72193112, 72193121, 72193122, 72193190, 72193210, 72193220, 72193290, 72193310, 72193320, 72193390, 72193410, 72193420, 72193490, 72193510, 72193520, 72193590, 72199011, 72804030 |
| Specification For Cold-Reduced and Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling. | IS 9485: 1980 | Specification For Cold-Reduced and Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling. | 72082530, 72082590, 72082630, 72082690, 72082730, 72082790, 72083630, 72083690, 72083730, 72083790, 72083830, 72083890, 72083930, 72083990, 72084030, 72084090, 72085130, 72085190, 72085230, 72085290, 72085330, 72085390, 72085430, 72085490, 72089000, 72091520, 72091590, 72091620, 72091690, 72091720, 72091790, 72091820, 72091890, 72092520, 72092590, 72092620, 72092690, 72092720, 72092790, 72092820, 72092890, 72099000, 72111440, 72111490, 72111940, 72111990, 72112340, 72112390, 72112940, 72112990, 72119090 |
| Specification for Mild Steel Wire for Cotter Pins. | IS 10794: 1984 | Specification for Mild Steel Wire for Cotter Pins. | 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72084010, 72084020, 72084030, 72084040, 72084090, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72089000, 72111300, 72111420, 72111440, 72111450, 72111490, 72191111, 72191112, 72191190, 72192111, 72192112, 72192121, 72192122, 72192131, 72192132, 72192141, 72192142, 72192190, 72192211, 72192212, 72192219, 72192291, 72192292, 72192299, 72192310, 72192320, 72192390, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72192490, 72193111, 72193112, 72193121, 72193122, 72193190, 72193210, 72193220, 72193290, 72193310, 72193320, 72193390, 72193410, 72193420, 72193490, 72193510, 72193520, 72193590, 72199011, 72199012, 72199013, 72199090 |
| Specification for Trapezoidal Steel Wire for Springs Washers. | IS 12262: 1988 | Specification for Trapezoidal Steel Wire for Springs Washers. | 72179019, 72179099, 72299013, 72299040, 72299052, 72299059, 72299090 |
| Structural Steel (Ordinary Quality)-Specification. | IS 15911: 2010 | Structural Steel (Ordinary Quality)-Specification. | 72082510, 72082520, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72089000, 72111300, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72119012, 72119090, 72139190 |
| Specification for Carbon and Carbon-Manganese Free-Cutting Steels. | IS 4431: 1978 | Specification for Carbon and Carbon-Manganese Free-Cutting Steels. | 72071120, 72071190, 72071220, 72071290, 72071910, 72071920, 72071990, 72072010, 72072090, 72131010, 72131090, 72141090, 72142090, 72149110, 72149190, 72149990, 72151000, 72155010, 72155090, 72159090, 72241000, 72249040, 72249091, 72249099, 72282000, 72283029, 72284000, 72285090, 72286093, 72286099, 72287011, 72287012, 72287021, 72287022, 72288090 |
| Specification for Case Hardening Steels. | IS 4432: 1988 | Specification for Case Hardening Steels. | 72071120, 72071190, 72071220, 72071290, 72071910, 72071990, 72072010, 72072020, 72072090, 72141090, 72149190, 72149990, 72155090, 72159090, 72241000, 72249040, 72249091, 72249099, 72282000, 72283029, 72284000, 72285090, 72286099 |
| Steels for Die Blocks for Drop Forging Specification. | IS 5518: 1996 | Steels for Die Blocks for Drop Forging Specification. | 72241000, 72249010, 72249020, 72249030, 72249040, 72281090, 72283011, 72283019, 72283024, 72283029, 72286011, 72286012, 72286094, 72286099 |
| Specification for Forged/Rolled CTC Segments. | IS 8748: 1978 | Specification for Forged/Rolled CTC Segments. | 72189100, 72189910, 72189990, 72210011, 72210012, 72210019, 72210090, 72221111, 72221112, 72221119, 72221191, 72221192, 72221199, 72221911, 72221912, 72221919, 72221991, 72221992, 72221999, 72222011, 72222012, 72222019, 72222091, 72222092, 72222099, 72223011, 72223012, 72223019, 72223091, 72223092, 72223099 |
| Specification for Quenched and Tempered Alloy Steel Forgings for Pressure Vessels. | IS 12145: 1987 | Specification for Quenched and Tempered Alloy Steel Forgings for Pressure Vessels. | 72249040, 72249099, 72253090, 72254011, 72254012, 72254019, 72259900 |
| Tool Steel Forgings for Metal Forming – Specification. | IS 13387: 1992 | Tool Steel Forgings for Metal Forming – Specification. | 72241000, 72249010, 72249020, 72249030, 72249040, 72283011, 72283019, 72283024, 72283029, 72286011, 72286012, 72286094, 72286099 |
| Carbon and Low Alloy Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used in Defence Services - Specification. | IS 14698: 1999 | Carbon and Low Alloy Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used in Defence Services - Specification. | 72071120, 72071130, 72071190, 72071210, 72071220, 72071230, 72071290, 72071920, 72071990, 72072010, 72072030, 72072090, 72141090, 72149110, 72149190, 72149990, 72155010, 72155090, 72159090, 72241000, 72249091, 72249099 |
| Cold - Reduced Tinmill Products – Blackplate. | IS/ISO 11951: 2016 | Cold - Reduced Tinmill Products – Blackplate. | 72091520, 72091530, 72091590, 72091620, 72091690, 72091720, 72091730, 72091790, 72091820, 72091830, 72091890, 72092520, 72092530, 72092590, 72092620, 72092630, 72092690, 72092720, 72092730, 72092790, 72092820, 72092830, 72092890, 72101110, 72101190, 72101210, 72101290, 72121010, 72121090 |
| Flame and Induction Hardening Steels – Specification. | IS 3930: 1994 | Flame and Induction Hardening Steels – Specification. | 72249090, 72249091, 72281010, 72281090, 72283011, 72283019, 72283021, 72283023, 72283024, 72283029, 72284000, 72285090, 72286011, 72286012, 72286091, 72286093, 72286094, 72286099 |
| Specification for Thermostat Metal Sheet and Strip. | IS 5478: 1969 | Specification for Thermostat Metal Sheet and Strip. | 72121090, 72122090, 72123090, 72125090, 72126000 |
| Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs – Specification. | IS 13352: 1992 | Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs – Specification. | 72071120, 72071190, 72071220, 72071290, 72071910, 72071920, 72071990, 72072010, 72072090, 72141090, 72142090, 72149110, 72149190, 72149990, 72155010, 72155090, 72159090, 72241000, 72249040, 72249091, 72249099, 72271000, 72272000, 72279010, 72279020, 72279030, 72279040, 72279050, 72279060, 72279090, 72281010, 72281090, 72282000, 72283021, 72283022, 72283023, 72283024, 72283029, 72284000, 72285010, 72285090, 72286011, 72286012, 72286091, 72286092, 72286093, 72286094, 72286099, 72288010, 72288020, 72288090 |
| Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete — Specification. | IS 16644: 2018 | Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete — Specification. | 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72173010, 72173020, 72173030, 72179011, 72179012, 72179013, 72179019, 72179091, 72179099 |
| Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips — Specification. | IS 17404: 2020 | Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips — Specification. | 72103010, 72103090, 72122010, 72122090, 72259100, 72259900 |
| Galvanized Structural Steel – Specification. | IS 16732: 2019 | Galvanized Structural Steel – Specification. | 72082510, 72082520, 72082540, 72082590, 72082610, 72082620, 72082640, 72082690, 72082710, 72082720, 72082740, 72082790, 72083610, 72083620, 72083640, 72083690, 72083710, 72083720, 72083740, 72083790, 72083810, 72083820, 72083840, 72083890, 72083910, 72083920, 72083940, 72083990, 72084010, 72084020, 72084040, 72084090, 72085110, 72085120, 72085140, 72085190, 72085210, 72085220, 72085240, 72085290, 72085310, 72085320, 72085340, 72085390, 72085410, 72085420, 72085440, 72085490, 72089000, 72169910, 72169990 |
| Heat-Treated Steels Alloy and Free-Cutting Steels — Ball and Roller Bearing Steels. | IS 17111: 2019 (ISO 683- 17: 2014) | Heat-Treated Steels Alloy and Free-Cutting Steels — Ball and Roller Bearing Steels. | 72249030, 72249091, 72249099, 72279030, 72279050, 72279060, 72279090, 72283019, 72283021, 72283023, 72283029, 72284000, 72285090, 72286012, 72286091, 72286093, 72286099, 72299059, 72299090, 73042990, 73043119, 73044100, 73044900, 73045110, 73262010 |
| Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement – Specification. | IS 12594: 1988 | Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement – Specification. | 72159010, 72159090 |
| Ferrochromium – Specification. | IS 1170: 1992 | Ferrochromium – Specification. | 72024100, 72024900, 72025000, 72029990 |
| Ferromanganese – Specification. | IS 1171: 2011 | Ferromanganese – Specification. | 72021100, 72021900, 72029990 |
| Silicomanganese – Specification. | IS 1470: 2013 | Silicomanganese – Specification. | 72023000, 72029990 |
| Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed Non-Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel | IS 18316: 2023 | Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed Non-Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel | 72251100, 72251910, 72251920, 72251990, 72261100, 72261910, 72261920, 72261990 |
| Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems | IS 18384: 2023 | Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems | 72082510, 72082520, 72082530, 72082540, 72082590, 72082610, 72082620, 72082630, 72082640, 72082690, 72082710, 72082720, 72082730, 72082740, 72082790, 72083610, 72083620, 72083630, 72083640, 72083690, 72083710, 72083720, 72083730, 72083740, 72083790, 72083810, 72083820, 72083830, 72083840, 72083890, 72083910, 72083920, 72083930, 72083940, 72083990, 72085110, 72085120, 72085130, 72085140, 72085190, 72085210, 72085220, 72085230, 72085240, 72085290, 72085310, 72085320, 72085330, 72085340, 72085390, 72085410, 72085420, 72085430, 72085440, 72085490, 72089000, 72111300, 72111410, 72111420, 72111430, 72111440, 72111450, 72111460, 72111490, 72111910, 72111920, 72111930, 72111940, 72111950, 72111960, 72111990, 72119090, 72253090, 72254011, 72254012, 72254013, 72254019, 72254020, 72254030, 72259090, 72269110, 72269120, 72269130, 72269190, 72269910, 72269920, 72269930, 72269940, 72269951, 72269990 |
| Hot- Dip galvanized/ galvannealed Steel Sheet and strips for Automotive Applications | IS 18385: 2023 | Hot- Dip galvanized/ galvannealed Steel Sheet and strips for Automotive Applications | 72104910, 72104990, 72109090, 72123090, 72123091, 72123099, 72125090, 72259210, 72259290, 72259990, 72269971, 72269973, 72269979, 72269990 |
| Hot-Dip Zinc - Aluminium - Magnesium Alloy Coated Steel Sheets, Plates and Strips | IS 18513: 2023 | Hot-Dip Zinc - Aluminium - Magnesium Alloy Coated Steel Sheets, Plates and Strips | 72104990, 72106100, 72106900, 72109090, 72123090, 72123099, 72125040, 72125090, 72259290, 72259920, 72259990, 72269979, 72269982, 72269990 |
| Ferromolybdenum - Specification | IS 1469: 1993 | Ferromolybdenum - Specification | 72027000, 72029990 |
| Specification for Ferro Vanadium | IS 1466: 1985 | Specification for Ferro Vanadium | 72029200, 72029990 |
| Stampings or laminations or cores of transformers (with or without winding). | Made from BIS standard marked steel conforming to IS 3024:2015, IS 648:2006 or IS 16585: 2016 (essential requirement) |  | 85049010, 85049090 |
| Stainless steel pipes and tubes. | Made from stainless steel conforming to the Indian Standards in Schedule 1, as sub-paragraph (4) of paragraph 3 provides |  | 73041110, 73041120, 73041190, 73042200, 73042400, 73044100, 73044900, 73051129, 73051229, 73053190, 73053990, 73059029, 73059099, 73061100, 73062100, 73064000, 73066100, 73066900, 73069090 |
| Tanks, casks, drums, cans, boxes and similar containers, (other than compressed or liquefied gas), of tin plate or tin free steel of capacity 50 litres or more but not exceeding 300 litres. | Made from tin plate and tin free steel conforming to IS 1993: 2018 and IS 12591: 2018 (Schedule 1, serial numbers 108 and 109), as sub-paragraph (5) of paragraph 3 provides |  | 73101010, 73101090, 73102910, 73102990 |
| Tanks, casks, drums, cans, boxes and similar containers, (other than compressed or liquefied gas), of tin plate or tin free cans of capacity less than 50 litres which are to be closed by soldering or crimping. | Made from tin plate and tin free steel conforming to IS 1993: 2018 and IS 12591: 2018 (Schedule 1, serial numbers 108 and 109), as sub-paragraph (5) of paragraph 3 provides |  | 73102110, 73102190, 73102910, 73102990 |
| Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal. Pilfer proof caps for packaging, all sorts, with or without washers or other fittings, of cork, rubber, polyethylene or any other material. Other seals of tin plate and tin free steel. | Made from tin plate and tin free steel conforming to IS 1993: 2018 and IS 12591: 2018 (Schedule 1, serial numbers 108 and 109), as sub-paragraph (5) of paragraph 3 provides |  | 83091000, 83099010, 83099030, 83099090 |
| Sign-plates, name-plates, address-plates and similar plates, numbers, letters and other symbols of tin plate and tin free steel. | Made from tin plate and tin free steel conforming to IS 1993: 2018 and IS 12591: 2018 (Schedule 1, serial numbers 108 and 109), as sub-paragraph (5) of paragraph 3 provides |  | 83100090 |
| Primary cells and primary batteries parts. | Made from tin plate and tin free steel conforming to IS 1993: 2018 and IS 12591: 2018 (Schedule 1, serial numbers 108 and 109), as sub-paragraph (5) of paragraph 3 provides |  | 85069000 |

## Every notification on this order

| Date | Notification | Status | What it did |
|---|---|---|---|
| June 22, 2026 | S.O. 3300(E)](https://files.indusdesk.com/qco/2026/so-3300e.pdf) PDF, 573 KB · Gazette](https://egazette.gov.in/WriteReadData/2026/273720.pdf) | Amended | The Steel and Steel Products (Quality Control) Amendment Order, 2026, dated June 20, 2026, provided that enforcement of the entries at serial numbers 23 and 129 of Schedule 1 (IS 2879: 1998 and IS 5518: 1996) shall not be operative for a period of 3 years from the date of publication in the Gazette. Enforcement of the entries at serial numbers 51, 52 and 53 (IS 5522: 2014, IS 6911: 2017 and IS 15997: 2012) shall not be operative for a period up to March 31, 2027. |
| November 20, 2025 | S.O. 5134(E)](https://files.indusdesk.com/qco/2025/so-5134e.pdf) PDF, 1.3 MB · Gazette](https://egazette.gov.in/WriteReadData/2025/267864.pdf) | Amended | The Steel and Steel Products (Quality Control) Amendment Order, 2025, dated November 20, 2025, provided that enforcement of the entries at serial numbers 24, 37, 48, 55, 68, 69, 73, 74, 75, 76, 77, 79, 81, 82, 83, 87, 88, 90, 95, 96, 97, 98, 99, 101, 104, 105, 106, 107, 112, 113, 114, 115, 116, 117, 118, 119, 120, 123, 124, 125, 150 and 151 of Schedule 1 shall not be operative for a period of 3 years from the date of publication in the Gazette. Enforcement of the entries at serial numbers 49, 50, 60, 64, 86, 92, 93, 94, 102, 128, 132, 135 and 137 shall not be operative for a period of 1 year. |
| August 30, 2024 | S.O. 3716(E)](https://files.indusdesk.com/qco/2024/so-3716e.pdf) PDF, 2.1 MB · Gazette](https://egazette.gov.in/WriteReadData/2024/256823.pdf) | In force | Issued the Steel and Steel Products (Quality Control) Order, 2024, dated August 29, 2024, in supersession of the order of the same name notified as S.O. 574(E). Schedule 1 lists 151 Indian Standards, adding IS 18316: 2023, IS 18384: 2023, IS 18385: 2023, IS 18513: 2023, IS 1469: 1993 and IS 1466: 1985 at 6 months from the date of notification, and Schedule 2 lists seven goods and articles. |
| August 1, 2024 | Order, File No. S-20011/1/2020-TECH (Part-1)](https://files.indusdesk.com/steel/orders/2024/2024-08-01-is-4409.pdf) PDF, 312 KB | In force | A Ministry of Steel order dated August 1, 2024, issued under the 2024 order notified as S.O. 574(E), extended the date of enforcement of IS 4409: 2023, Specification for Ferronickel, by 3 months, to October 23, 2024. |
| May 1, 2024 | Order, File No. S-20011/1/2020-TECH (Part-1)](https://files.indusdesk.com/steel/orders/2024/2024-05-01-is-4409.pdf) PDF, 321 KB | In force | A Ministry of Steel order dated May 1, 2024, issued under the 2024 order notified as S.O. 574(E), extended the date of enforcement of IS 4409 : 2023, Specification for Ferronickel, by 3 months, to July 23, 2024. |
| February 8, 2024 | S.O. 574(E)](https://files.indusdesk.com/qco/2024/so-574e.pdf) PDF, 1.2 MB · Gazette](https://egazette.gov.in/WriteReadData/2024/251956.pdf) | In force | Issued the Steel and Steel Products (Quality Control) Order, 2024, dated February 5, 2024, in supersession of the 2020 order notified as S.O. 4637(E). Schedule 1 listed 145 Indian Standards, adding IS 1170, IS 1171, IS 1470, IS 12594, IS 16732 and IS 17111 and leaving out IS 4430, IS 5489, IS 7291, IS 12313, IS 12367 and IS 14491; it also required a Test Certificate bearing the Standard Mark with each consignment and the disposal of sub-standard products as scrap. |
| July 25, 2023 | Order, File No. S-20011/1/2020-TECH (Part-1)](https://files.indusdesk.com/steel/orders/2023/s-20011-1-2020-tech-part-1-2023-07-25.pdf) PDF, 298 KB | In force | A Ministry of Steel order dated July 25, 2023, issued under the 2020 order notified as S.O. 4637(E), extended the date of enforcement of IS 4409: 1973, Specification for Ferronickel, by 6 months, to January 23, 2024. |
| February 6, 2023 | Order, File No. S-20011/1/2020-TECH (Part-1)](https://files.indusdesk.com/steel/orders/2023/s-20011-1-2020-tech-part-1-2023-02-06.pdf) PDF, 903 KB | In force | A Ministry of Steel order dated February 6, 2023, issued under the 2020 order notified as S.O. 4637(E), extended the date of enforcement of IS 4409: 1973, Specification for Ferronickel, by 6 months, to July 23, 2023. |
| November 1, 2022 | Order, File No. S-20011/1/2020-TECH (Part-1)](https://files.indusdesk.com/steel/orders/2022/s-20011-1-2020-tech-part-1-2022-11-01.pdf) PDF, 328 KB | In force | A Ministry of Steel order issued under the 2020 order notified as S.O. 4637(E) extended the date of enforcement of IS 1110:1990, Ferrosilicon-Specification, and IS 4409 : 1973, Specification for Ferronickel, by 3 months, to January 23, 2023. |
| April 26, 2022 | Order, File No. S-20011/1/2020-TECH (Part-1)](https://files.indusdesk.com/steel/orders/2022/s-20011-1-2020-tech-part-1-2022-04-26.pdf) PDF, 183 KB | In force | A Ministry of Steel order dated April 26, 2022, issued under the 2020 order notified as S.O. 4637(E), extended the date of enforcement of IS 1110:1990, Ferrosilicon-Specification, and IS 4409 : 1973, Specification for Ferronickel, by 6 months, to October 23, 2022. |
| November 18, 2021 | Order, File No. 1(8)/2020-TD](https://files.indusdesk.com/steel/orders/2021/2021-11-18-extension-is-13387.pdf) PDF, 328 KB | In force | A Ministry of Steel order dated November 18, 2021, issued under the 2020 order notified as S.O. 4637(E), extended the date of enforcement of IS 13387:1992, Tool Steel forgings for Metal forming specification, by 3 months, to February 13, 2022. |
| November 16, 2021 | Order, File No. S-20011/16/2020-TECH](https://files.indusdesk.com/steel/orders/2021/2021-11-16-extension-is-14331.pdf) PDF, 330 KB | In force | A Ministry of Steel order dated November 16, 2021, issued under the 2020 order notified as S.O. 4637(E), extended the date of enforcement of IS 14331:1995, Steel for High Temperature Bolting Applications — Specification, by 6 months, to May 15, 2022. |
| October 26, 2021 | Order, File No. S-20011/1/2020-TECH](https://files.indusdesk.com/steel/orders/2021/2021-10-26-extension-is-1110-4409.pdf) PDF, 338 KB | In force | A Ministry of Steel order dated October 26, 2021, issued under the 2020 order notified as S.O. 4637(E), extended the date of enforcement of IS 1110:1990, Ferrosilicon-Specification, and IS 4409: 1973, Specification for Ferronickel, by 6 months, to April 23, 2022. |
| September 1, 2021 | Order, File No. 1(8)/2019-TD](https://files.indusdesk.com/steel/orders/2021/2021-09-01-extension-is-4454-part-4-11946-11947.pdf) PDF, 199 KB | In force | A Ministry of Steel order dated September 1, 2021, issued under the 2020 order notified as S.O. 4637(E), extended the date of enforcement of IS 4454(Part 4): 2001, Steel Wires for Mechanical Springs — Part 4: Stainless Steel Wire, by 3 months, to November 26, 2021, and of IS 11946: 1987, Soft Magnetic Iron Strips, and IS 11947: 1987, Soft Magnetic Iron Rods, Bars, Flats and Sections, by 6 months, to February 26, 2022. |
| July 31, 2021 | Order, F. No. S-20011/1/2020-TECH](https://files.indusdesk.com/steel/orders/2021/2021-07-31-extension-is-3748-7291-12146.pdf) PDF, 192 KB | In force | A Ministry of Steel order dated July 31, 2021, issued under the 2020 order notified as S.O. No. 4637(E), extended the date of enforcement of IS 3748: 1990, Tool and die steels – Specification, IS 7291: 1981, Specification for High-speed tool steels, and IS 12146: 1987, Specification for Carbon manganese steel forgings for pressure vessels, by 6 months, to January 23, 2022. |
| July 31, 2021 | Order, F. No. S-20011/1/2020-TECH](https://files.indusdesk.com/steel/orders/2021/2021-07-31-extension-is-3748-7291-12146.pdf) PDF, 192 KB | In force | A Ministry of Steel order dated July 31, 2021, issued under the 2020 order notified as S.O. No. 4637(E), extended the date of enforcement of IS 3748: 1990, Tool and die steels – Specification, IS 7291: 1981, Specification for High-speed tool steels, and IS 12146: 1987, Specification for Carbon manganese steel forgings for pressure vessels, by 6 months, to January 23, 2022. |
| May 28, 2021 | Order, F. No 1(8)/2019-TD](https://files.indusdesk.com/steel/orders/2021/2021-05-28-extension-is-6529.pdf) PDF, 209 KB | In force | A Ministry of Steel order dated May 28, 2021, issued under the 2020 order notified as S.O. No. 4637(E), extended the date of enforcement of IS 6529:1996, Stainless Steel Blooms, Billets and Slabs for Forging, by 3 months, to August 26, 2021. |
| May 17, 2021 | Order, F. No S-20011/16/2020-Tech.](https://files.indusdesk.com/steel/orders/2021/2021-05-17-extension-is-7226-14331.pdf) PDF, 205 KB | In force | A Ministry of Steel order dated May 17, 2021, issued under the 2020 order notified as S.O. No. 4637(E), extended the date of enforcement of IS 7226: 1974, Specification for cold rolled medium, high carbon and low alloy steel strip for general engineering purposes, by 3 months, to August 15, 2021, and of IS 14331: 1995, Steels for High Temperature Bolting Applications Specification, by 6 months, to November 15, 2021. |
| May 12, 2021 | Order, F. No 1 (8) / 2020-TD](https://files.indusdesk.com/steel/orders/2021/2021-05-12-extension-is-4072-4432-5518-12145-13387-13352.pdf) PDF, 221 KB | In force | A Ministry of Steel order dated May 12, 2021, issued under the 2020 order notified as S.O. No. 4637(E), extended the date of enforcement of IS 4072:1975, IS 4432:1988, IS 5518:1996, IS 12145:1987, IS 13387:1992 and IS 13352:1992 by 6 months, to November 13, 2021. |
| April 26, 2021 | Order, F. No S-20011/1/2020-TECH](https://files.indusdesk.com/steel/orders/2021/2021-04-26-extension-is-1110-4409.pdf) PDF, 343 KB | In force | A Ministry of Steel order dated April 26, 2021, issued under the 2020 order notified as S.O. No. 4637(E), extended the date of enforcement of IS 1110:1990, Ferrosilicon-Specification, and IS 4409:1973, Specification for Ferronickel, by 6 months, to October 23, 2021. |
| April 16, 2021 | Order, F. No 1(5)/2016-TD (Vol-III)](https://files.indusdesk.com/steel/orders/2021/2021-04-16-extension-is-1993-12591.pdf) PDF, 274 KB | In force | A Ministry of Steel order dated April 16, 2021, issued under the 2020 order notified as S.O. No. 4637(E), extended the date of enforcement of IS 1993: 2018, Cold-reduced Electrolytic tin plate, and IS 12591:2018, Cold reduced electrolytic chromium / Chromium oxide-coated steel, by 3 months, to July 17, 2021. |
| March 8, 2021 | Order, File No. 1(8)/2019-TD](https://files.indusdesk.com/steel/orders/2021/2021-03-08-extension-is-6529-4454-part-4-11946-11947-12045.pdf) PDF, 226 KB | In force | A Ministry of Steel order dated March 8, 2021, issued under the 2020 order notified as S.O. 4637(E), extended the enforcement date of IS 6529:1996 by 3 months, to May 26, 2021, and of IS 4454 (Part 4) : 2001, IS 11946: 1987, IS 11947: 1987 and IS 12045: 1987 by 6 months, to August 26, 2021. |
| February 26, 2021 | Order, File No. S-20011/16/2020-TECH](https://files.indusdesk.com/steel/orders/2021/2021-02-26-extension-is-4398-3195.pdf) PDF, 277 KB | In force | A Ministry of Steel order dated February 26, 2021, issued under the 2020 order notified as S.O. 4637(E), extended the enforcement date of IS 4398: 1994, Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races-Specification, by 3 months, to May 15, 2021, and of IS 3195: 1992, Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) Specification, by 6 months, to August 15, 2021. |
| December 22, 2020 | S.O. 4637(E)](https://files.indusdesk.com/qco/2020/so-4637e.pdf) PDF, 1.7 MB · Gazette](https://egazette.gov.in/WriteReadData/2020/223900.pdf) | In force | Issued the Steel and Steel Products (Quality Control) Order, 2020, dated December 22, 2020, in supersession of the order of the same name notified as S.O. 4082(E). Table 1 listed 145 Indian Standards, adding IS 17404 : 2020 at 6 months from the date of publication of the order, and Table 2 listed seven goods and articles. |
| November 12, 2020 | S.O. 4082(E)](https://files.indusdesk.com/qco/2020/so-4082e.pdf) PDF, 2.0 MB · Gazette](https://egazette.gov.in/WriteReadData/2020/223124.pdf) | In force | Issued the Steel and Steel Products (Quality Control) Order, 2020, dated November 12, 2020, in supersession of the order of the same name notified as S.O. 2379(E), dated July 16, 2020. Table 1 listed 144 Indian Standards, and Table 2 listed seven goods and articles, five of them made from tin plate and tin free steel. |
| July 21, 2020 | Order, File No. S-20011/1/2020-TECH](https://files.indusdesk.com/steel/orders/2020/s-20011-1-2020-tech-2020-10-22.pdf) PDF, 210 KB | In force | A Ministry of Steel order dated October 22, 2020, issued under the order notified as S.O. 2379 (E), extended the enforcement dates of IS 1110: 1990 (Ferro Silicon) and IS 4409: 1973 (Ferro Nickel) by 6 months, to April 23, 2021, and of IS 3748: 1990 (Tool & Die Steels), IS 7291: 1981 (High Speed Tool Steels) and IS 12146: 1987 (C Mn Steel Forgings for Pressure Vessels) by 3 months, to January 23, 2021. |
| July 21, 2020 | S.O. 2379(E) | In force |  |
| May 28, 2020 | Order, File No. S-20011/1/2020-TECH](https://files.indusdesk.com/steel/orders/2020/s-20011-1-2020-tech-2020-07-22.pdf) PDF, 362 KB | In force | A Ministry of Steel order dated July 22, 2020, issued under the order notified as S.O. 2379(E) dated July 17, 2020, extended the date of enforcement of IS 1110:1990 (Ferro Silicon), IS 4409:1973 (Ferro Nickel), IS 3748:1990 (Tool & Die Steels), IS 7291:1981 (High Speed Tool Steels), IS 7494:1981 (Steel for Valves for Internal Combustion Engines) and IS 12146:1987 (C Mn Steel Forgings for Pressure Vessels) by three months beyond July 23, 2020, to October 23, 2020. |
| May 27, 2020 | S.O. 1673(E)](https://files.indusdesk.com/qco/2020/so-1673e.pdf) PDF, 2.2 MB · Gazette](https://egazette.gov.in/WriteReadData/2020/219647.pdf) | In force | Issued the Steel and Steel Products (Quality Control) Order, 2020, dated May 27, 2020, in supersession of the order of the same name notified as S.O. 756(E), dated February 14, 2020. Table 1 listed 111 Indian Standards, with dates of implementation of immediate effect, July 23, 2020, November 15, 2020, or 9 months from the date of publication of the order, and Table 2 covered stampings, laminations or cores of transformers and stainless steel pipes and tubes. |
| February 19, 2019 | S.O. 756(E) | In force |  |

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[

Each notification is linked, as a PDF, in the list above.

Where a notification shows "Gazette", that links the Gazette of India's copy; ours was checked against it on October 20, 2026.

- [QCO guide](https://indusdesk.com/qco/)

- [All Quality Control Orders](https://indusdesk.com/qco/tracker/)
