BIS establishes 11 standards, four on floors for indoor sports
The Bureau of Indian Standards issued Ref: HQ-PUB013/1/2020-PUB-BIS (1635) on November 3, 2026. BIS notification 1635 lists 11 Indian Standards established on October 28, 2026. Three older standards they replace stay in force until April 28, 2027. It is issued under Rule 15(1), Bureau of Indian Standards Rules, 2018.
The Bureau of Indian Standards (BIS), Department of Consumer Affairs, issued notification Ref: HQ-PUB013/1/2020-PUB-BIS (1635) at New Delhi on November 3, 2026. It appeared in the Gazette of India, Extraordinary, Part III, Section 4, No. 669, dated November 6, 2026 (CG-DL-E-14112026-277919). BIS made it in pursuance of rule 15(1) of the Bureau of Indian Standards Rules, 2018. S. K. Verma, Scientist F & DDG (Hallmarking), signed it.
The schedule lists 11 Indian Standards, all established on October 28, 2026. Three of them replace an older standard, which stays in force alongside the new one until it's withdrawn on April 28, 2027. They cover the titrimetric determination of aluminum in zinc base alloys for die castings (IS 2600 (Part 7)), heat resistance, heat aging and humid aging on sole adhesion of complete footwear (IS 8085 (Part 1/Sec 2), replacing IS 8085 (Part 1) – 1986) and bimetallic tape for electrical contacts (IS 12714).
The other eight have no earlier standard to withdraw. Four are parts of IS 19990 on floors for indoor sports: selection and classification (Part 1), shock absorption and vertical deformation tests (Part 2), and the specification (Part 3/Sec 1) and installation, maintenance and inspection (Part 3/Sec 2) of PVC flooring. The rest cover optical emission spectrometry of zinc base alloys (IS 2600 (Part 8)), a nuclear energy vocabulary (IS 16902 (Part 3)), linear motion rolling bearing roller blocks (IS 19930) and isobutanol (bio-based) and isobutanol-blended automotive diesel fuel (IS 19957).
Four of the 11 are paired in the schedule with an ISO standard. The notification doesn't say what holders of a BIS licence on a replaced standard must do, beyond the April 28, 2027 withdrawal date.
- Issued by
- Bureau of Indian Standards, Department of Consumer Affairs
- Document
- Notification Ref: HQ-PUB013/1/2020-PUB-BIS (1635)
- Dated
- November 3, 2026
- Published
- Gazette of India, Extraordinary, Part III, Section 4, No. 669, November 6, 2026 (CG-DL-E-14112026-277919)
- Standards established
- 11, on October 28, 2026
- Standards replacing older ones
- 3
- Older standards withdrawn
- April 28, 2027; in force alongside the new ones until then
- Legal basis
- Rule 15(1), Bureau of Indian Standards Rules, 2018
- Signed by
- S. K. Verma, Scientist F & DDG (Hallmarking)
Indian Standards established on October 28, 2026
| Sl No | Indian Standard established | Title | Standard withdrawn on April 28, 2027 |
|---|---|---|---|
| 1 | IS 2600 (Part 7) : 2026 (ISO 1169 : 2006) | Methods of Chemical Analysis of Zinc and Zinc Base Alloys for Die Castings Part 7 Determination of Aluminium Content, Titrimetric Method (Second Revision) | IS 2600 (Part 7) : 2022 |
| 2 | IS 2600 (Part 8) : 2026 (ISO 3815-1 : 2005) | Methods of Chemical Analysis of Zinc and Zinc Base Alloys for Die Castings Part 8 Analysis of Solid Samples by Optical Emission Spectrometry | NA |
| 3 | IS 8085 (Part 1/Sec 2) : 2026 | Footwear, Methods of Test Part 1 Physical Parameter Section 2 Heat Resistance, Heat Ageing and Humid Ageing on Sole Adhesion of Complete Footwear (Second Revision) | IS 8085 (Part 1) – 1986 |
| 4 | IS 12714 : 2026 | Bimetallic Tape for Electrical Contacts, Specification (First Revision) | IS 12714 : 1989 |
| 5 | IS 16902 (Part 3) : 2026 (ISO 12749-3 : 2024) | Nuclear Energy, Nuclear Technologies and Radiological Protection, Vocabulary Part 3 Nuclear Installations, Processes and Technologies | NA |
| 6 | IS 19930 : 2026 (ISO 19457 : 2026) | Rolling Bearings, Linear Motion Rolling Bearing, Subassemblies, Roller Blocks, Boundary Dimensions and Tolerance Values | NA |
| 7 | IS 19957 : 2026 | Isobutanol (Bio-Based) and Isobutanol (Bio-Based) Blended Automotive Diesel Fuel for Diesel Engines Application, Specification | NA |
| 8 | IS 19990 (Part 1) : 2026 | Floors for Indoor Sports Part 1 Selection and Classification, Guidelines | NA |
| 9 | IS 19990 (Part 2) : 2026 | Floors for Indoor Sports Part 2 Determination of Shock Absorption and Vertical Deformation, Method of Tests | NA |
| 10 | IS 19990 (Part 3/Sec 1) : 2026 | Floors for Indoor Sports Part 3 PVC Flooring Section 1 Specification | NA |
| 11 | IS 19990 (Part 3/Sec 2) : 2026 | Floors for Indoor Sports Part 3 PVC Flooring Section 2 Installation, Maintenance and Inspection | NA |
The notification (PDF, 601 KB)
Source: Gazette of India, CG-DL-E-14112026-277919.
Checked against the official copy on November 17, 2026.