BIS insights

BIS establishes 16 standards, on rubber tests and foundry materials

The Bureau of Indian Standards issued Ref: HQ-PUB013/1/2020-PUB-BIS (1634) on November 3, 2026. BIS notification 1634 lists 16 Indian Standards established on October 28, 2026. The 16 older standards they replace stay in force until April 28, 2027. It is issued under Rule 15(1), Bureau of Indian Standards Rules, 2018.

BIS · November 3, 2026

Vishnu Gupta

The Bureau of Indian Standards (BIS), Department of Consumer Affairs, issued notification Ref: HQ-PUB013/1/2020-PUB-BIS (1634) at New Delhi on November 3, 2026. It appeared in the Gazette of India, Extraordinary, Part III, Section 4, No. 667, dated November 6, 2026 (CG-DL-E-14112026-277917). BIS made it in pursuance of rule 15(1) of the Bureau of Indian Standards Rules, 2018. S. K. Verma, Scientist F & DDG (Hallmarking), signed it.

The schedule lists 16 Indian Standards, all established on October 28, 2026. Fourteen of them replace one or more older standards, 16 in all, which stay in force alongside the new ones until they're withdrawn on April 28, 2027. Five revise standards on foundry materials and castings: physical tests for foundry sands (IS 1918), natural molding sand (IS 3343), sampling of steel castings (IS 6907), core repairing paste (IS 9008) and pitch powder for cast iron foundries (IS 13100). Three revise parts of IS 1200 on measuring building and civil engineering works: steelwork and ironwork (Part 8), glazing (Part 14), and painting, polishing and varnishing (Part 15). IS 4511 (Part 4) revises the test for bound styrene in styrene butadiene rubber latices.

Five are parts of IS 16848, Rubber, Methods of Test, each paired with an ISO standard: ash by combustion (Part 3/Sec 1) and by thermogravimetric analysis (Part 3/Sec 2), volatile matter by hot-mill and oven methods (Part 4/Sec 1) and by thermogravimetric methods (Part 4/Sec 2), and Mooney viscosity (Part 5). They replace separate tests written for natural rubber (IS 3660 (Part 2) and (Part 7)), natural rubber latex (IS 3708 (Part 9)), synthetic rubber (IS 11720 (Part 3), (Part 4) and (Part 5)) and polybutadiene rubbers (IS 10016 (Part 2)).

The two with no earlier standard to withdraw cover the determination of vanadium in steels (IS 228 (Part 35)) and basic dimensions of ISO inch screw threads (IS 4218 (Part 3)). Eight of the 16 are paired in the schedule with an ISO standard. The notification doesn't say what holders of a BIS licence on a replaced standard must do, beyond the April 28, 2027 withdrawal date.

Issued by
Bureau of Indian Standards, Department of Consumer Affairs
Document
Notification Ref: HQ-PUB013/1/2020-PUB-BIS (1634)
Dated
November 3, 2026
Published
Gazette of India, Extraordinary, Part III, Section 4, No. 667, November 6, 2026 (CG-DL-E-14112026-277917)
Standards established
16, on October 28, 2026
Standards replacing older ones
14, replacing 16 older standards
Older standards withdrawn
April 28, 2027; in force alongside the new ones until then
Legal basis
Rule 15(1), Bureau of Indian Standards Rules, 2018
Signed by
S. K. Verma, Scientist F & DDG (Hallmarking)

Indian Standards established on October 28, 2026

Sl NoIndian Standard establishedTitleStandard withdrawn on April 28, 2027
1IS 228 (Part 35) : 2026 (ISO 4942 : 2016)Methods for Chemical Analysis of Steels Part 35 Determination of Vanadium Content, N-BPHA Spectrophotometric MethodNA
2IS 1200 (Part 8) : 2026Method of Measurement of Building and Civil Engineering Works Part 8 Steelwork and Ironwork (Fifth Revision)IS 1200 (Part 8) : 1993
3IS 1200 (Part 14) : 2026Method of Measurement of Building and Civil Engineering Works Part 14 Glazing (Fourth Revision)IS 1200 (Part 14) – 1984
4IS 1200 (Part 15) : 2026Method of Measurement of Building and Civil Engineering Works Part 15 Painting, Polishing, Varnishing, Etc (Fifth Revision)IS 1200 (Part 15) – 1987
5IS 1918 : 2026Methods of Physical Tests for Foundry Sands (First Revision)IS 1918 – 1966
6IS 3343 : 2026Natural Moulding Sand for Use in Foundries, Specification (First Revision)IS 3343 – 1965
7IS 4218 (Part 3) : 2026 (ISO 725 : 2009)ISO General Purpose Inch Screw Threads Part 3 Basic DimensionsNA
8IS 4511 (Part 4) : 2026 (ISO 3136 : 2023)Methods of Test for Styrene Butadiene Rubber (SBR) Latices Part 4 Determination of Bound Styrene (Third Revision)IS 4511 (Part 4) : 2023
9IS 6907 : 2026Steel Castings, Methods of Sampling (Second Revision)IS 6907 : 1992
10IS 9008 : 2026Core Repairing Paste for Use in Foundries, Specification (First Revision)IS 9008 – 1978
11IS 13100 : 2026Pitch Powder for Use in Cast Iron Foundry (First Revision)IS 13100 : 1991
12IS 16848 (Part 3/Sec 1) : 2026 (ISO 247-1 : 2018)Rubber, Methods of Test Part 3 Determination of Ash Section 1 Combustion MethodIS 10016 (Part 2) – 1984; IS 11720 (Part 5) : 1993; IS 3708 (Part 9) : 2018
13IS 16848 (Part 3/Sec 2) : 2026 (ISO 247-2 : 2018)Rubber, Methods of Test Part 3 Determination of Ash Section 2 Thermogravimetric Analysis (TGA)IS 3708 (Part 9) : 2018; IS 11720 (Part 5) : 1993; IS 10016 (Part 2) – 1984
14IS 16848 (Part 4/Sec 1) : 2026 (ISO 248-1 : 2021)Rubber, Methods of Test Part 4 Volatile-Matter Content, Determination Section 1 Hot-Mill Method and Oven MethodIS 3660 (Part 2) – 1985; IS 11720 (Part 4) : 1993
15IS 16848 (Part 4/Sec 2) : 2026 (ISO 248-2 : 2019)Rubber, Methods of Test Part 4 Volatile-Matter Content, Determination Section 2 Thermogravimetric Methods Using an Automatic Analyser with an Infrared Drying UnitIS 3660 (Part 2) – 1985; IS 11720 (Part 4) : 1993
16IS 16848 (Part 5) : 2026 (ISO 289-1 : 2015)Rubber, Methods of Test Part 5 Determination Mooney Viscosity Using a Shearing-Disc ViscometerIS 11720 (Part 3) : 1993; IS 3660 (Part 7) : 2013

The notification (PDF, 658 KB)

Source: Gazette of India, CG-DL-E-14112026-277917.

Checked against the official copy on November 17, 2026.