BIS insights

BIS establishes 28 standards, 13 of them on areal surface texture

The Bureau of Indian Standards issued F. No. HQ-PUB013/1/2020-PUB-BIS (1626) on October 8, 2026. BIS notification 1626 lists 28 Indian Standards established on October 6, 2026. Eight older standards they replace stay in force until April 6, 2027. It is issued under Rule 15(1), Bureau of Indian Standards Rules, 2018.

BIS · October 8, 2026

Vishnu Gupta

The Bureau of Indian Standards (BIS), Department of Consumer Affairs, issued notification F. No. HQ-PUB013/1/2020-PUB-BIS (1626) at New Delhi on October 8, 2026. It appeared in the Gazette of India, Extraordinary, Part III, Section 4, No. 648, dated November 3, 2026. BIS made it in pursuance of rule 15(1) of the Bureau of Indian Standards Rules, 2018.

The schedule lists 28 Indian Standards, all established on October 6, 2026. Eight of them replace an earlier version of the same standard. The older versions stay in force alongside the new ones until they're withdrawn on April 6, 2027. The eight cover lime based blocks (IS 3115), gauging practice for plain workpieces (IS 3455), cast iron box angle plates (IS 6232), precision polygons (IS 6987), electrical conductivity of antistatic belts (IS 15148), and three conveyor belt standards (IS 16365, IS 17114 and IS 17496).

The other 20 have no earlier standard to withdraw. Thirteen are parts of IS 18431 on areal surface texture, each paired in the schedule with a part of ISO 25178. They run from how to indicate it to how to calibrate the instruments that measure it. The rest cover micrometers for external measurements (IS 19839), coordinate measuring machine test uncertainty (IS 19840), refuse collection vehicles (IS 19926), anhydrous calcium sulphate for pharmaceutical use (IS 19933), biochemic tablets for homoeopathy (IS 19935 (Part 1)), biaxial tensile properties of woven fabric (IS 19936) and the classification of tea types (IS 19937).

Twenty-two of the 28 are based on an ISO standard, one of them (IS 19936) as a modified adoption. The notification doesn't say what holders of a BIS licence on a replaced version must do, beyond the April 6, 2027 withdrawal date. S. K. Verma, Scientist F & DDG (Hallmarking), signed it.

Issued by
Bureau of Indian Standards, Department of Consumer Affairs
Document
Notification F. No. HQ-PUB013/1/2020-PUB-BIS (1626)
Dated
October 8, 2026
Published
Gazette of India, Extraordinary, Part III, Section 4, No. 648, November 3, 2026 (CG-DL-E-11112026-277831)
Standards established
28, on October 6, 2026
Standards replacing older ones
8, each replacing its own earlier version
Older standards withdrawn
April 6, 2027; in force alongside the new ones until then
Based on ISO standards
22 of the 28
Legal basis
Rule 15(1), Bureau of Indian Standards Rules, 2018
Signed by
S. K. Verma, Scientist F & DDG (Hallmarking)

Indian Standards established on October 6, 2026

Sl NoIndian Standard establishedTitleStandard withdrawn on April 6, 2027
1IS 3115 : 2026Lime Based Blocks, Specification (Third Revision)IS 3115 : 1992
2IS 3455 : 2026Gauging Practice for Plain Workpieces (Second Revision)IS 3455 – 1971
3IS 6232 : 2026Cast Iron Box Angle Plates, Specification (First Revision)IS 6232 – 1971
4IS 6987 : 2026Precision Polygons, Specification (First Revision)IS 6987 – 1973
5IS 15148 : 2026 (ISO 1813 : 2025)Belts Drives, Electrical Conductivity of Antistatic Belts: Characteristics and Test Methods (Second Revision)IS 15148 : 2015 (ISO 1813 : 2014)
6IS 16365 : 2026 (ISO 21182 : 2025)Light Conveyor Belts, Determination of the Coefficient of Friction (First Revision)IS 16365 : 2015 (ISO 21182 : 2013)
7IS 17114 : 2026 (ISO 251 : 2024)Conveyor Belts with Textile Carcass, Widths and Lengths (First Revision)IS 17114 : 2019 (ISO 251 : 2012)
8IS 17496 : 2026 (ISO 283 : 2023)Textile Conveyor Belts, Full Thickness Tensile Strength, Elongation at Break and Elongation at The Reference Load, Test Method (First Revision)IS 17496 : 2021 (ISO 283 : 2015)
9IS 18431 (Part 1) : 2026 (ISO 25178-1 : 2016)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 1 Indication of Surface TextureNA
10IS 18431 (Part 2) : 2026 (ISO 25178-2 : 2021)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 2 Terms, Definitions and Surface Texture ParametersNA
11IS 18431 (Part 6) : 2026 (ISO 25178-6 : 2010)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 6 Classification of Methods for Measuring Surface TextureNA
12IS 18431 (Part 72) : 2026 (ISO 25178-72 : 2017)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 72 XML File Format X3pNA
13IS 18431 (Part 600) : 2026 (ISO 25178-600 : 2019)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 600 Metrological Characteristics for Areal Topography Measuring MethodsNA
14IS 18431 (Part 601) : 2026 (ISO 25178-601 : 2025)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 601 Design and Characteristics of Contact (Stylus) InstrumentsNA
15IS 18431 (Part 602) : 2026 (ISO 25178-602 : 2025)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 602 Design and Characteristics of Non-Contact (Confocal Chromatic Probe) InstrumentsNA
16IS 18431 (Part 603) : 2026 (ISO 25178-603 : 2025)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 603 Design and Characteristics of Non-Contact (Phase Shifting Interferometry) InstrumentsNA
17IS 18431 (Part 604) : 2026 (ISO 25178-604 : 2025)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 604 Design and Characteristics of Non-Contact (Coherence Scanning Interferometry) InstrumentsNA
18IS 18431 (Part 605) : 2026 (ISO 25178-605 : 2025)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 605 Design and Characteristics of Non-Contact (Point Autofocus Probe) InstrumentsNA
19IS 18431 (Part 607) : 2026 (ISO 25178-607 : 2019)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 607 Nominal Characteristics of Non-Contact (Confocal Microscopy) Instruments)NA
20IS 18431 (Part 700) : 2026 (ISO 25178-700 : 2022)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 700 Calibration, Adjustment and Verification of Areal Topography Measuring InstrumentsNA
21IS 18431 (Part 701) : 2026 (ISO 25178-701 : 2010)Geometrical Product Specifications (GPS), Surface Texture, Areal Part 701 Calibration and Measurement Standards for Contact (Stylus) InstrumentsNA
22IS 19839 : 2026 (ISO 3611 : 2023)Geometrical Product Specifications (GPS), Dimensional Measuring Equipment, Design and Metrological Characteristics of Micrometers for External MeasurementsNA
23IS 19840 : 2026 (ISO/TS 23165 : 2006)Geometrical Product Specifications (GPS), Guidelines for the Evaluation of Coordinate Measuring Machine (CMM) Test UncertaintyNA
24IS 19926 : 2026 (ISO 13155 : 2025)Refuse Collection Vehicles, Vocabulary, Classification and Requirements for Commercial SpecificationsNA
25IS 19933 : 2026Anhydrous Calcium Sulphate for Pharmaceutical Use, SpecificationNA
26IS 19935 (Part 1) : 2026Biochemic Tablets for Use in Homoeopathy, Specification Part 1 Calcarea SulphuricaNA
27IS 19936 : 2026 (ISO 13118 : 2024, MOD)Textiles, Biaxial Tensile Properties of Woven Fabric, Determination of Elasticity Properties using a Cruciform Test PieceNA
28IS 19937 : 2026 (ISO 20715 : 2023)Tea, Classification of Tea TypesNA