BIS insights

BIS establishes 7 standards, from gas cylinders to health informatics

The Bureau of Indian Standards issued Ref: HQ-PUB013/1/2020-PUB-BIS (1636) on November 4, 2026. BIS notification 1636 lists 7 Indian Standards established on November 3, 2026. Six older standards they replace stay in force until May 3, 2027. It is issued under Rule 15(1), Bureau of Indian Standards Rules, 2018.

BIS · November 4, 2026

Vishnu Gupta

The Bureau of Indian Standards (BIS), Department of Consumer Affairs, issued notification Ref: HQ-PUB013/1/2020-PUB-BIS (1636) at New Delhi on November 4, 2026. It appeared in the Gazette of India, Extraordinary, Part III, Section 4, No. 668, dated November 6, 2026 (CG-DL-E-12112026-277869). BIS made it in pursuance of rule 15(1) of the Bureau of Indian Standards Rules, 2018. S. K. Verma, Scientist F & DDG (Hallmarking), signed it.

The schedule lists 7 Indian Standards, all established on November 3, 2026. Six of them replace an older version of the same standard, which stays in force alongside the new one until it's withdrawn on May 3, 2027. They cover refillable seamless steel gas cylinders of quenched and tempered steel (IS 7285 (Part 2), Fifth Revision), energy storage capacitors (IS 13666, replacing IS 13666 : 1993), tracheal tubes designed for laser surgery (IS/ISO 14408 : 2016), coupling capacitors and capacitor dividers (IS/IEC 60358-1 : 2025), and two health informatics standards on electronic prescriptions (IS 17769) and the International Patient Summary (IS 17888).

The seventh, IS 19916 : 2026, Light Gauge Metal Containers, Non-Refillable LPG Cartridges, Specification, is new and has no earlier standard to withdraw.

Four of the 7 are based on an ISO or IEC standard. The notification doesn't say what holders of a BIS licence on a replaced standard must do, beyond the May 3, 2027 withdrawal date.

Issued by
Bureau of Indian Standards, Department of Consumer Affairs
Document
Notification Ref: HQ-PUB013/1/2020-PUB-BIS (1636)
Dated
November 4, 2026
Published
Gazette of India, Extraordinary, Part III, Section 4, No. 668, November 6, 2026 (CG-DL-E-12112026-277869)
Standards established
7, on November 3, 2026
Standards replacing older ones
6
Older standards withdrawn
May 3, 2027; in force alongside the new ones until then
Legal basis
Rule 15(1), Bureau of Indian Standards Rules, 2018
Signed by
S. K. Verma, Scientist F & DDG (Hallmarking)

Indian Standards established on November 3, 2026

Sl NoIndian Standard establishedTitleStandard withdrawn on May 3, 2027
1IS 7285 (Part 2) : 2026Refillable Seamless Steel Gas Cylinders, Specification Part 2 Quenched and Tempered Steel Cylinders with Tensile Strength Less than 1 100 MPA (112 kgf/mm²) (Fifth Revision)IS 7285 (Part 2) : 2017
2IS 13666 : 2026Energy Storage Capacitors, Specification (First Revision)IS 13666 : 1993
3IS/ISO 14408 : 2016Tracheal Tubes Designed for Laser Surgery, Requirements for Marking and Accompanying Information (First Revision)IS/ISO 14408 : 2005
4IS 17769 : 2026 (ISO 17523 : 2025)Health Informatics, Requirements for Electronic Prescriptions (First Revision)IS 17769 : 2022
5IS 17888 : 2026 (ISO 27269 : 2025)Health Informatics, International Patient Summary (First Revision)IS 17888 : 2022
6IS 19916 : 2026Light Gauge Metal Containers, Non-Refillable LPG Cartridges, SpecificationNA
7IS/IEC 60358-1 : 2025Coupling Capacitors and Capacitor Dividers Part 1 General Rules (Third Revision)IS/IEC 60358-1 : 2012

The notification (PDF, 701 KB)

Source: Gazette of India, CG-DL-E-12112026-277869.

Checked against the official copy on November 17, 2026.