Smart metering case study
Imports cleared under a quality control order
Itron India’s BIS certification stalled on material specifications, leaving 238,959 water meters worth ₹44.68 crore at risk. We benchmarked them against ISO 4064 and OIML R49, built the case under Section 16 of the BIS Act and represented to DPIIT and BIS.

- Client
- Itron India
- Sector
- Smart metering
- Order
- Water Meters and Accessories (Quality Control) Order, 2023
- Authority
- DPIIT and BIS
OutcomeImports cleared, for six months
The situation
Itron India supplies smart water meters to government utilities and infrastructure projects, and has done so in India for more than 20 years.
The Water Meters and Accessories (Quality Control) Order, 2023 (S.O. 1142(E), dated March 5, 2024) made BIS certification mandatory under Scheme I, against IS 779:1994 for domestic meters and IS 2373 for bulk meters.
Itron’s applications stalled after the preliminary inspection. The proposed rejection rested only on deviations from the material specifications in Annex B. Nobody questioned the meters’ safety, accuracy, durability or performance.
The order
The Water meters and accessories (Quality Control) Order, 2023 (S.O. 1142(E)) is dated March 5, 2024 and was published on March 7, 2024. It came into force six months after publication, later for micro and small enterprises, and covers three products:
| Product | Indian Standard |
|---|---|
| Water meters (domestic type) | IS 779:1994 |
| Water meters (bulk type) | IS 2373:1981 |
| Ferrules for water services | IS 2692:1989 |
The challenges
- Modern meters, an old standard. Itron used materials accepted worldwide. The Indian Standard still prescribed older ones.
- A lot at stake. 238,959 water meters worth ₹44.68 crore, across several government-linked purchase orders.
- Knock-on risk. Delayed projects, contractual penalties and trouble clearing customs.
What we did
- Reframed the problem. We showed this wasn’t a failure to comply. It was a gap between a legacy standard and modern technology.
- Built the technical case. We showed the meters met ISO 4064, OIML R49 and the EU Measuring Instruments Directive, so nothing was given up on safety, measurement or durability. The deviation was about materials only.
- Set the legal and policy argument. We built the case on Section 16 of the BIS Act, which allows for the public interest, and on the point that a quality control order is about quality and safety, not a fixed list of materials. We asked for interim relief, never for the order to be weakened.
- Drafted the representation. One document for DPIIT that kept a procedural deviation apart from real compliance, and set out the government projects at stake, more than 20 years of use in India and the utilities that depend on the meters.
- Worked with DPIIT and BIS. We engaged both at the technical consultation stage, so the matter was treated as a policy question, not just a BIS file.
- Mapped the shipments. We put the purchase orders, invoices and product variants (DN15, DN25, DN50 and RF) into one submission, so DPIIT could approve specific lots and keep control.
The outcome
Before
Certification. Stalled on the material specifications in Annex B, with no safety or performance concern raised
At stake. 238,959 water meters worth ₹44.68 crore
After
Imports. After consulting BIS, DPIIT issued no objection to the import of the consignments
Projects. Itron’s government supply projects continued; the relief is valid for six months
The approval came with four conditions:
- It covers only the listed consignments
- It rests on the documents submitted, without a physical check
- It is valid for six months
- The importer stays responsible for compliance
What it means
- Regulatory. A near rejection became an approval at policy level, and a precedent for when a standard lags behind technology.
- Commercial. Imports worth more than ₹44 crore unblocked, without project delays or losses.
- Strategic. Even under a strict quality control order, a well-argued case can find a practical answer.
What we learned
Success with India’s regulators isn’t only about compliance. It’s about how the issue is read, how the case is put and who it’s put to.
The official document
- S.O. 1142(E), the Water meters and accessories (Quality Control) Order, 2023, published March 7, 2024