Milk and milk products must carry a drop logo from July 1, 2028
The Food Safety and Standards Authority of India issued F. No. SS-T017/1/2023-Standard-FSSAI on November 6, 2026. From July 1, 2028, FSSAI's Labelling and Display Second Amendment Regulations, 2026 require all milk and milk products to carry a white drop on blue logo. It amends Schedule-I of the Food Safety and Standards (Labelling and Display) Regulations, 2020, new paragraph (3).
The Food Safety and Standards Authority of India (FSSAI) made the Food Safety and Standards (Labelling and Display) Second Amendment Regulations, 2026 by a notification dated November 6, 2026. They require all milk and milk products to carry a set logo. The notification, F. No. SS-T017/1/2023-Standard-FSSAI, is dated November 6, 2026 and appeared in the Gazette of India, Extraordinary, Part III, Section 4, No. 673, dated November 9, 2026. The regulations come into force on July 1, 2028.
FSSAI made them under section 92(1) and section 92(2)(k) of the Food Safety and Standards Act, 2006, with the previous approval of the Central Government. The draft, the Food Safety and Standards (Labelling and Display) Amendment Regulations, 2025, was notified on February 17, 2025 and made available to the public on February 20, 2025, with sixty days for objections and suggestions. FSSAI says it considered those it received.
The regulations insert a new paragraph (3) after paragraph (2) of Schedule-I of the Food Safety and Standards (Labelling and Display) Regulations, 2020. It covers all milk and milk products, including composite milk products, as defined in sub-clause (a) of clause (5) of sub-regulation 2.1.1 of the Food Safety and Standards (Food Products Standards and Food Additives) Regulations, 2011. The logo is a white drop on a blue square. The notification gives the blue as C: 89, M: 58, Y: 0, K: 0.
The minimum size depends on the area of the principal display panel. On a panel up to 100 square centimeters, each side of the square must be at least 6 mm, with a drop at least 4.56 mm high and 3 mm wide. Above 2500 square centimeters, the square must be at least 16 mm, with a drop at least 12.16 mm high and 8 mm wide. The notification doesn't say where on the label the logo goes or why it's being introduced. Rajit Punhani, Chief Executive Officer, signed it.
- Issued by
- Food Safety and Standards Authority of India
- Document
- Notification F. No. SS-T017/1/2023-Standard-FSSAI
- Regulations
- Food Safety and Standards (Labelling and Display) Second Amendment Regulations, 2026
- Dated
- November 6, 2026
- Published
- Gazette of India, Extraordinary, Part III, Section 4, No. 673, November 9, 2026 (CG-DL-E-10112026-277816)
- Comes into force
- July 1, 2028
- Applies to
- All milk and milk products, including composite milk products, as per regulation 2.1.1(5)(a) of the Food Products Standards and Food Additives Regulations, 2011
- Logo
- A white drop on a blue square; blue C: 89, M: 58, Y: 0, K: 0
- Amends
- Schedule-I of the Food Safety and Standards (Labelling and Display) Regulations, 2020, new paragraph (3)
- Draft
- Notified February 17, 2025; public on February 20, 2025; sixty days for objections and suggestions
- Legal basis
- Section 92(1) and 92(2)(k), Food Safety and Standards Act, 2006
- Signed by
- Rajit Punhani, Chief Executive Officer
Minimum logo sizes
| Area of principal display panel (square centimeters) | A: minimum size of each side of square (mm) | B: minimum height of drop (mm) | C: minimum width of drop (mm) |
|---|---|---|---|
| Upto 100 | 6 | 4.56 | 3 |
| Upto 100 to 500 | 8 | 6.08 | 4 |
| Upto 500 to 2500 | 12 | 9.12 | 6 |
| Above 2500 | 16 | 12.16 | 8 |
The notification (PDF, 785 KB)
Checked against the official copy on November 12, 2026.