Quality Control Order for bolts, nuts and fasteners under 19 Indian Standards
The 2024 order applies the BIS Standard Mark to bolts, nuts and fasteners from August 1, 2024, with later dates for small and micro enterprises. The Bureau of Indian Standards is the certifying and enforcing authority. Certification is under Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.
The Bolts, Nuts and Fasteners (Quality Control) Order was first issued by the Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade) as S.O. 3267(E), dated and published on July 21, 2023. It covers bolts, nuts and fasteners against 19 Indian Standards, among them hexagon head bolts, screws and nuts, tower and flush bolts, sliding door bolts (aldrops), high strength structural bolts and nuts, and wrought aluminium alloy bolt and screw stock.
The goods must conform to the corresponding standard and bear the Standard Mark under a licence from the Bureau of Indian Standards, as per Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018. The Bureau is the certifying and enforcing authority, and contraventions are punishable under the Bureau of Indian Standards Act, 2016.
The 2023 order was to come into force six months from publication, nine months for small enterprises and twelve months for micro enterprises. On July 12, 2024, S.O. 2771(E) replaced it with the Bolts, Nuts and Fasteners (Quality Control) Order, 2024, which set implementation dates of August 1, 2024, November 1, 2024 for small enterprises and February 1, 2025 for micro enterprises.
The 2024 order excludes goods made in India for export, goods imported as part of a finished good, sub-assembly or component, and goods made in India by enterprises registered on the Udyam Portal whose investment in plant and machinery or equipment does not exceed twenty-five lakh rupees and whose turnover does not exceed two crore rupees. For three years from commencement it also excludes certain imports for manufacturing, and it allows limited imports for research and for spares and after-sales service.
The 2024 order was made in supersession of the 2023 order, except as respects things done or omitted to be done before the supersession.
- Order
- Bolts, Nuts and Fasteners (Quality Control) Order, 2024
- Issued by
- Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade)
- Product group
- Bolts, Nuts and Fasteners
- Where it stands
- In force
- What it requires
- Bolts, nuts and fasteners must conform to the corresponding Indian Standard in the order's Table and bear the Standard Mark under a licence from the Bureau of Indian Standards. The latest version of each standard, with its amendments, as notified by the Bureau, applies.
- Certification scheme
- Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018
- Came into force
- August 1, 2024 for enterprises other than micro and small enterprises, under the Bolts, Nuts and Fasteners (Quality Control) Order, 2024, which itself came into force on its publication in the Official Gazette; the 2023 order it superseded named six months from the date of publication
- Small enterprises
- Under the 2024 order, small enterprises from November 1, 2024 and micro enterprises from February 1, 2025, as defined under the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006). The 2023 order had set nine months from publication for small enterprises and twelve months for micro enterprises.
- Exemptions
- Goods or articles manufactured domestically for export
- Goods or articles imported as a part of any finished good or sub-assembly or component
- Goods or articles manufactured domestically by an enterprise registered on the Udyam Portal whose investment in plant and machinery or equipment at original cost does not exceed twenty-five lakh rupees and whose turnover does not exceed two crore rupees for the preceding financial year, as certified by a Chartered Accountant
- For three years from the commencement of the order, goods or articles imported by a manufacturer for manufacturing equipment, products, sub-assemblies or components in India for exports, against a self-declaration and an undertaking that they will not be put to any other use or sold in the domestic market
- For three years from the commencement of the order, goods or articles imported by a manufacturer for manufacturing in India, up to 80% of the total value imported in financial year 2023-2024 in financial year 2024-25, 70% in 2025-26 and 50% in 2026-27 and thereafter, with year-wise records and a plan for indigenization submitted to the Central Government
- Up to two hundred kilograms a year imported for research and development by manufacturers of bolts, nuts and fasteners, not to be sold commercially
- Goods or articles domestically procured or imported as spares or for after-sales service by a manufacturer of equipment, products, sub-assemblies or components, up to five percent of the value of bolts, nuts and fasteners imported in financial year 2023-24, subject to a declaration of old stock to the Bureau within three months of commencement
- Enforcement
- The Bureau of Indian Standards is the certifying and enforcing authority. Any person who contravenes the order is punishable under the provisions of the Bureau of Indian Standards Act, 2016.
The products and their standards
| Product | Indian Standard | Title of the standard |
|---|---|---|
| Bolts, Nuts and Fasteners | IS 1363 (Part 1):2019 | Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64) |
| Bolts, Nuts and Fasteners | IS 1363 (Part 2):2018 | Hexagon Head Screw (Size ranges from M 5 to M 64) |
| Bolts, Nuts and Fasteners | IS 1363 (Part 3):2018 | Hexagon Head Bolts, Screws and Nuts of product Grade C - Hexagon Nuts (Size Range M5 to M64) |
| Bolts, Nuts and Fasteners | IS 1364 (Part 1):2018 | Hexagon Head Bolts, Screws and Nuts of product Grades A and B - Hexagon Head Bolts (Size Range M 1.6 To M 64) |
| Bolts, Nuts and Fasteners | IS 1364 (Part 2):2018 | Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Hexagon Head Screws (Size Range M 1.6 to M 64) |
| Bolts, Nuts and Fasteners | IS 4621:1975 | Indicating Bolts for use in public baths and lavatories |
| Bolts, Nuts and Fasteners | IS 5187:1972 | Flush Bolts |
| Bolts, Nuts and Fasteners | IS 10238:2001 | Fasteners - Threaded Steel Fastener - Step Bolts for Steel Structures |
| Bolts, Nuts and Fasteners | IS 12427:2001 | Fasteners - Threaded Steel Fasteners - Hexagon Head Transmission Tower Bolts |
| Bolts, Nuts and Fasteners | IS 3757:1985 | High Strength Structural Bolts |
| Bolts, Nuts and Fasteners | IS 204 (Part 2):1992 | Tower Bolts- Non-ferrous metals |
| Bolts, Nuts and Fasteners | IS 204 (Part 1):1991 | Tower Bolts- Ferrous metals |
| Bolts, Nuts and Fasteners | IS 15834:2020 | Stainless Steel Sliding Door Bolts (aldrops) for use With Padlocks |
| Bolts, Nuts and Fasteners | IS 2681:1993 | Non-ferrous metal sliding door bolts (aldrops) for use with padlocks |
| Bolts, Nuts and Fasteners | IS 281:2009 | Mild steel sliding door bolts for use with padlocks |
| Bolts, Nuts and Fasteners | IS 7534:1985 | Sliding locking bolts for use with padlocks |
| Bolts, Nuts and Fasteners | IS 1284:1975 | Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes |
| Bolts, Nuts and Fasteners | IS 15833:2009 | Stainless steel Tower Bolts |
| Bolts, Nuts and Fasteners | IS 6623:2004 | High Strength Structural Nuts |
Every notification on this order
| Date | Notification | Status | What it did |
|---|---|---|---|
| July 15, 2024 | S.O. 2771(E) PDF, 1.7 MB · Gazette | In force | Dated July 12, 2024, it issued the Bolts, Nuts and Fasteners (Quality Control) Order, 2024 in supersession of the 2023 order, with implementation dates of August 1, 2024 generally, November 1, 2024 for small enterprises and February 1, 2025 for micro enterprises, and exclusions for certain imports, imports for research and development, and spares and after-sales service. |
| July 21, 2023 | S.O. 3267(E) PDF, 702 KB · Gazette | In force | Issued the Bolts, Nuts and Fasteners (Quality Control) Order, 2023, requiring the goods to conform to 19 Indian Standards and bear the Standard Mark under a licence from the Bureau, from six months after publication, nine months for small enterprises and twelve months for micro enterprises. |
Each notification is linked, as a PDF, in the list above.
Where a notification shows "Gazette", that links the Gazette of India's copy; ours was checked against it on October 20, 2026.