Quality Control Order for footwear made from all-rubber and all-polymeric material
All rubber and all polymeric footwear and its components must carry the BIS Standard Mark from August 1, 2024; micro and small units are exempt. The Bureau of Indian Standards is the certifying and enforcing authority. Certification is under Scheme-I of Schedule-II of Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.
The Footwear made from All Rubber and all Polymeric Material and its Components (Quality Control) Order, 2024 was issued by the Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade) as S.O. 1422(E), dated March 15, 2024, and came into force on August 1, 2024. It lists 12 products, from rubber and PVC boots and outsoles to sandals, slippers and hawai chappals, each against its Indian Standard.
The goods must conform to the corresponding standard and bear the Standard Mark under a licence from the Bureau of Indian Standards, which is the certifying and enforcing authority. The order does not apply to goods meant for export, to micro and small manufacturing units, or to imports of four outsole components used to make footwear in India for export only, against a self-declaration certified by the Council for Leather Exports.
The first order, of 2020 (S.O. 3858(E)), covered 13 products. Its start was deferred to July 1, 2021 and then July 1, 2022, and it was rescinded on June 3, 2022, when a 2022 order (S.O. 2600(E)) with the same products was issued for July 1, 2023. Amendments of August 2022 and September 2023 added the micro and small unit and export-component exclusions. The 2024 order superseded the 2022 order.
The period for selling stock without the Standard Mark was then extended to July 31, 2026 (S.O. 3701(E)) and to July 31, 2027 (S.O. 3037(E)), which also exempted imports of up to 4500 pairs a year for research and development. S.O. 775(E) and S.O. 776(E) of February 2026 exempted certain consignments shipped or ordered before the date of implementation. On June 25, 2026, the order was listed in the Schedule of the Transition Facilitation (Quality Control) Order, 2026.
- Order
- Footwear made from All Rubber and all Polymeric Material and its Components (Quality Control) Order, 2024
- Issued by
- Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade), Leather and Footwear Section
- Product group
- Foot Wear
- Where it stands
- Transition Facilitation
- What it requires
- The footwear and components in the Table must conform to the corresponding Indian Standard and bear the Standard Mark under a licence from the Bureau of Indian Standards.
- Certification scheme
- Scheme-I of Schedule-II of Bureau of Indian Standards (Conformity Assessment) Regulations, 2018
- Came into force
- August 1, 2024, under the Footwear made from All Rubber and all Polymeric Material and its Components (Quality Control) Order, 2024 (S.O. 1422(E)). The first order, of 2020, was to come into force on publication and was deferred to July 1, 2021 and then July 1, 2022 before it was rescinded; the 2022 order that replaced it was to come into force on July 1, 2023
- Small enterprises
- The order does not apply to micro and small manufacturing units as defined in section 7 of the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006), as amended from time to time. The proviso was first inserted into the 2022 order by S.O. 3880(E) and is carried into the 2024 order.
- Exemptions
- Goods or articles meant for export
- Micro and small manufacturing units as defined in section 7 of the Micro, Small and Medium Enterprises Development Act, 2006
- Import of moulded rubber outsoles (IS 5676:1995), microcellular rubber sheets for outsoles (IS 6664:1992), moulded PVC outsoles (IS 6719:1972) and PU outsoles (IS 13893:1994) used in manufacturing footwear in India for export only, subject to a self-declaration by the importer certified by the Council for Leather Exports and uploaded with the other documents on the Indian Customs Electronic Data Interchange portal
- Stock of footwear without the Bureau of Indian Standards Mark, manufactured or imported before the commencement of the order, may be sold, displayed or offered for sale up to July 31, 2027 (S.O. 3037(E); the 2024 order as issued allowed declared stock up to June 30, 2025, and S.O. 3701(E) set July 31, 2026)
- Import of up to 4500 pairs a year by manufacturers of leather and footwear products for research and development and non-commercial use, on condition that they are not sold commercially, are marked and embossed with the words 'NOT FOR SALE' and are disposed of as scrap, with year-wise records kept (S.O. 3037(E))
- Import consignments with a Bill of Lading showing shipment before the date of implementation (August 1, 2024) and a Bill of Entry on or before one hundred and eighty days after that date, on condition that the importer gives the Bureau copies of the Bill of Lading, Bill of Entry and supporting documents within seven days of clearance (S.O. 775(E))
- Goods for which the purchase order was placed before the date of implementation and whose Bill of Lading and Bill of Entry are dated on or before one hundred and eighty days from that date, on condition that the importer gives the Bureau copies of the purchase order, Bill of Lading, Bill of Entry and supporting documents within seven days of clearance (S.O. 776(E))
- Enforcement
- The Bureau of Indian Standards is the certifying and enforcing authority.
The products and their standards
| Product | Indian Standard | Title of the standard |
|---|---|---|
| Industrial and protective rubber knee and ankle boots | IS 5557: 2004 | Industrial and protective rubber knee and ankle boots - Specification |
| All rubber gum boots and ankle boots | IS 5557 (Part 2): 2018 | All rubber gum boots and ankle boots: Part 2 occupational purposes |
| Moulded Rubber Outsoles | IS 5676: 1995 | Moulded Rubber Unit Outsoles — Specification |
| Microcellular Rubber Sheets for Outsoles | IS 6664: 1992 | Microcellular Rubber Sheets for Outsoles — Specification |
| Moulded PVC Outsoles | IS 6719: 1972 | Moulded PVC Unit Outsoles — Specification |
| Sandal and Slippers | IS 6721: 2023 | Sandal and Slippers- Specification |
| Hawai Chappal | IS 10702: 2023 | Hawai Chappal- Specification |
| Polyvinyl chloride (PVC) industrial boots | IS 12254: 2021 | Polyvinyl chloride (PVC) industrial boots - Specification |
| Polyurethane Outsoles | IS 13893: 1994 | Polyurethane Unit Outsoles — Specification |
| Unlined moulded rubber boots | IS 13995: 1995 | Unlined moulded rubber boots – Specification |
| Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use | IS 16645: 2018 | Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use- Specification |
| Footwear for men and women for municipal scavenging work | IS 16994: 2018 | Footwear for men and women for municipal scavenging work |
Every notification on this order
| Date | Notification | Status | What it did |
|---|---|---|---|
| June 25, 2026 | S.O. 3417(E) PDF, 746 KB · Gazette | Transition Facilitation | Issued the Transition Facilitation (Quality Control) Order, 2026, whose Schedule lists this order (date of issue October 27, 2020; date of implementation August 1, 2024). For the orders listed, goods may carry the Standard Mark under a licence as per Scheme II of Schedule II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018, available only to a manufacturer supplying a company granted specific permission by the Department for Promotion of Industry and Internal Trade after a risk assessment by an Implementation Committee; applications are accepted for twenty-four months and the order remains in force for five years unless extended. |
| June 12, 2026 | S.O. 3037(E) PDF, 1.1 MB · Gazette | Amended | Extended the period for selling stock without the Bureau of Indian Standards Mark from July 31, 2026 to July 31, 2027, and exempted imports of up to 4500 pairs a year by manufacturers of leather and footwear products for research and development and non-commercial use, subject to conditions. |
| February 13, 2026 | S.O. 776(E) PDF, 724 KB · Gazette | In force | Dated February 12, 2026, it exempted goods under 26 Quality Control Orders, including this one (date of implementation August 1, 2024), where the purchase order was placed before the date of implementation and the Bill of Lading and Bill of Entry are dated on or before one hundred and eighty days from it, subject to the importer giving the Bureau the documents within seven days of clearance. |
| February 13, 2026 | S.O. 775(E) PDF, 724 KB · Gazette | In force | Dated February 12, 2026, it exempted imports under 26 Quality Control Orders, including this one (date of implementation August 1, 2024), in consignments with a Bill of Lading showing shipment before the date of implementation and a Bill of Entry on or before one hundred and eighty days after it, subject to the importer giving the Bureau the documents within seven days of clearance. |
| August 30, 2024 | S.O. 3701(E) PDF, 1.7 MB · Gazette | Amended | Substituted the fifth proviso to paragraph 2 of the 2024 order, permitting stock of footwear without the Bureau of Indian Standards Mark, manufactured or imported before the commencement of the order, to be sold, displayed or offered for sale up to July 31, 2026. |
| March 15, 2024 | S.O. 1422(E) PDF, 1.2 MB · Gazette | In force | Issued the Footwear made from All Rubber and all Polymeric Material and its Components (Quality Control) Order, 2024, in supersession of the 2022 order, with effect from August 1, 2024. It lists 12 products, keeps the export and micro and small unit exclusions and the export-component import provision, and allowed declared old stock to be sold up to June 30, 2025. |
| September 4, 2023 | S.O. 3893(E) PDF, 690 KB · Gazette | Amended | Dated September 1, 2023, it inserted a proviso exempting imports of four footwear sole components (IS 5676:1995, IS 6664:1992, IS 6719:1972 and IS 13893:1994) used in manufacturing footwear in India for export only, subject to a self-declaration certified by the Council for Leather Exports. |
| August 11, 2022 | S.O. 3880(E) PDF, 1.2 MB · Gazette | Amended | Inserted a proviso to paragraph 2 of the 2022 order so that it does not apply to micro and small manufacturing units as defined in section 7 of the Micro, Small and Medium Enterprises Development Act, 2006. |
| June 3, 2022 | S.O. 2600(E) PDF, 1.4 MB · Gazette | In force | Issued the Footwear Made from all-Rubber and all Polymeric Material and its Components (Quality Control) Order, 2022, covering the same 13 products as the 2020 order, with effect from July 1, 2023. |
| June 3, 2022 | S.O. 2597(E) PDF, 1.0 MB · Gazette | Rescinded | Rescinded the Footwear made from all- Rubber & all Polymeric material and its components (Quality Control) Order, 2020, except as respects things done or omitted to be done before the rescission. |
| June 30, 2021 | S.O. 2646(E) PDF, 1.3 MB · Gazette | Amended | Substituted sub-paragraph (2) of paragraph 1 of the 2020 order so that it comes into force on July 1, 2022. |
| December 4, 2020 | S.O. 4378(E) PDF, 1.2 MB · Gazette | Amended | Substituted sub-paragraph (2) of paragraph 1 of the 2020 order so that it comes into force on July 1, 2021. |
| October 12, 2020 | S.O. 3858(E) PDF, 1.2 MB · Gazette | In force | Dated October 27, 2020 and published on October 28, 2020, it issued the Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, covering 13 products, to come into force on publication. |
Each notification is linked, as a PDF, in the list above.
Where a notification shows "Gazette", that links the Gazette of India's copy; ours was checked against it on October 20, 2026.