Quality Control Order for resin treated compressed wood laminates (compregs, IS 3513)
The 2024 order requires compregs to meet IS 3513 (Parts 1 to 3):1989 with the BIS mark from January 14, 2025, later for small and micro enterprises. It covers Resin treated compressed wood laminates, Resin treated compressed wood laminates and Resin treated compressed wood laminates. The Bureau of Indian Standards is the certifying and enforcing authority.
The Resin treated compressed wood laminates (Quality Control) Order, 2023 was issued by the Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade) as S.O. 3139(E), dated and published July 14, 2023, under sub-sections (1) and (2) of section 16 read with section 17 and sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016. It covers resin treated compressed wood laminates (compregs) for electrical, chemical and general purposes, against IS 3513 (Part 1), (Part 2) and (Part 3):1989.
The laminates must conform to the corresponding standard and bear the Standard Mark under a licence from the Bureau of Indian Standards, as per Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018. Goods manufactured domestically for export are excluded. The Bureau is the certifying and enforcing authority, and contraventions are punishable under the Bureau of Indian Standards Act, 2016.
The 2023 order was to come into force six months from notification, nine months for small enterprises and twelve months for micro enterprises. S.O. 1018(E), dated February 29, 2024 and published March 5, 2024, superseded it with the Resin Treated Compressed Wood Laminates (Quality Control) Order, 2024, with the same standards, setting January 14, 2025, April 14, 2025 for small enterprises and July 14, 2025 for micro enterprises.
On February 12, 2026, S.O. 775(E) and S.O. 776(E), each covering 26 Quality Control Orders, gave this order's date of implementation as January 14, 2025. They exempt imports shipped before that date, and goods ordered before it, where the Bill of Entry falls within one hundred and eighty days of it, provided the importer gives the Bureau copies of the documents within seven days of clearance. The 2024 order and both exemptions are listed as in force.
- Order
- Resin Treated Compressed Wood Laminates (Quality Control) Order, 2024
- Issued by
- Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade)
- Product group
- Resin Treated Compressed Wood Laminates
- Where it stands
- In force
- What it requires
- Resin treated compressed wood laminates must conform to IS 3513 (Part 1), (Part 2) or (Part 3):1989 as applicable and bear the Standard Mark under a licence from the Bureau of Indian Standards as per Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.
- Certification scheme
- Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018
- Came into force
- January 14, 2025 under the Resin Treated Compressed Wood Laminates (Quality Control) Order, 2024 (S.O. 1018(E)); the 2023 order it superseded (S.O. 3139(E)) was to come into force six months from the date of notification (published July 14, 2023)
- Small enterprises
- Under the 2024 order: April 14, 2025 for small enterprises and July 14, 2025 for micro enterprises, as defined under the Micro, Small and Medium Enterprises Development Act, 2006. The 2023 order had given nine and twelve months from publication.
- Exemptions
- Goods or articles manufactured domestically meant for export
- Imports in consignments shipped under a Bill of Lading before January 14, 2025, the date of implementation, with a Bill of Entry on or before one hundred and eighty days after that date, subject to copies of the Bill of Lading and Bill of Entry being given to the Bureau within seven days of clearance (S.O. 775(E))
- Goods or articles whose purchase order was placed before January 14, 2025, the date of implementation, with the Bill of Lading and Bill of Entry dated on or before one hundred and eighty days from that date, subject to copies of the purchase order, Bill of Lading and Bill of Entry being given to the Bureau within seven days of clearance (S.O. 776(E))
- Enforcement
- The Bureau of Indian Standards is the certifying and enforcing authority. Any person who contravenes the order is punishable under the provisions of the Bureau of Indian Standards Act, 2016.
The products and their standards
| Product | Indian Standard | Title of the standard |
|---|---|---|
| Resin treated compressed wood laminates | IS 3513 (Part 1):1989 | Resin treated compressed wood laminates (compregs) - For electrical purposes |
| Resin treated compressed wood laminates | IS 3513 (Part 2):1989 | Resin treated compressed wood laminates (compregs) - For chemical purposes |
| Resin treated compressed wood laminates | IS 3513 (Part 3):1989 | Resin treated compressed wood laminates (compregs) - For general purposes |
Every notification on this order
| Date | Notification | Status | What it did |
|---|---|---|---|
| February 13, 2026 | S.O. 775(E) PDF, 724 KB · Gazette | In force | Dated February 12, 2026, it exempted, for 26 Quality Control Orders including this one, imports in consignments shipped under a Bill of Lading before the date of implementation and entered under a Bill of Entry on or before one hundred and eighty days after it. For this order the date of implementation is given as January 14, 2025. |
| February 13, 2026 | S.O. 776(E) PDF, 724 KB · Gazette | In force | Dated February 12, 2026, it exempted, for the same 26 Quality Control Orders, goods whose purchase order was placed before the date of implementation and whose Bill of Lading and Bill of Entry are dated on or before one hundred and eighty days from that date, given as January 14, 2025 for this order. |
| March 5, 2024 | S.O. 1018(E) PDF, 1.3 MB · Gazette | In force | Issued the Resin Treated Compressed Wood Laminates (Quality Control) Order, 2024, dated February 29, 2024 and published March 5, 2024, in supersession of the 2023 order, with the same three standards, to come into force on January 14, 2025, April 14, 2025 for small enterprises and July 14, 2025 for micro enterprises. |
| July 14, 2023 | S.O. 3139(E) PDF, 1.3 MB · Gazette | In force | Issued the Resin treated compressed wood laminates (Quality Control) Order, 2023, dated and published July 14, 2023, requiring compregs for electrical, chemical and general purposes to conform to IS 3513 (Part 1), (Part 2) and (Part 3):1989 and bear the Standard Mark, from six months after notification, nine months for small enterprises and twelve months for micro enterprises. |
Each notification is linked, as a PDF, in the list above.
Where a notification shows "Gazette", that links the Gazette of India's copy; ours was checked against it on October 20, 2026.