Furniture QCO timeline: every notification and date
The furniture QCO came into force on February 13, 2026, the implementation date DPIIT records in S.O. 3417(E). The order is dated February 13, 2025, and the Gazette published it on February 14, 2025. Four amendment orders followed in 2026. By our count, the eighteen months for micro and small enterprises ran out in mid-August 2026.
Published Updated
Furniture QCO timeline: what has been notified, and when?
The furniture QCO timeline runs through six Gazette notices: the order, S.O. 801(E) of 2025; three amendments of February 13 and March 2, 2026; the transition order, S.O. 3417(E), of June 25, 2026; and S.O. 5950(E) of November 2, 2026. Related orders, a WTO notice, a DGFT rule and BIS steps sit around them.
We read each notice in the table on October 28, 2026, and S.O. 5950(E) on November 8, 2026. Each row links our copy of the official PDF where we hold one. For what the order requires, see our furniture QCO guide.
| Date (Gazette) | Notice | What it did | Part | Our copy |
|---|---|---|---|---|
| September 27, 2023 (WTO, no Gazette) | G/TBT/N/IND/318 | India notified the draft order to the WTO | WTO step | Draft order PDF, opens in a new tab |
| September 12, 2024 | S.O. 3916(E), CG-DL-E-12092024-257111 | Brought upholstered composites for non-domestic furniture under IS 15768:2008 | Related order | S.O. 3916(E) PDF, opens in a new tab |
| September 20, 2024 (dated September 17) | S.O. 4098(E), CG-DL-E-20092024-257284 | Listed motorized furniture as appliance item 82 | Related order, superseded | S.O. 4098(E) PDF, opens in a new tab |
| February 14, 2025 (dated February 13) | S.O. 801(E) of 2025, CG-DL-E-14022025-261042 | Made the ISI mark compulsory on six kinds of furniture | The order | S.O. 801(E) PDF, opens in a new tab |
| May 19, 2025 | S.O. 2232(E), CG-DL-E-19052025-263220 | Replaced S.O. 4098(E); set March 19, 2026 for motorized furniture | Related order, superseded | S.O. 2232(E) PDF, opens in a new tab |
| June 2025 (no day printed) | PM/IS 17631/2 to 17634/2 | Let chairs, stools, tables, desks and storage units be tested by family | BIS step | Manuals: IS 17631 (PM/IS 17631/2/June 25, 2025-06), opens in a new tab, IS 17632 (PM/IS 17632/2/June 25, 2025-06), opens in a new tab, IS 17633 (PM/IS 17633/2/June 25, 2025-06), opens in a new tab and IS 17634 (PM/IS 17634/2/June 25, 2025-06), opens in a new tab |
| December 16, 2025 (BIS circular) | CMD-I/2:4:1 | Ended the in-house laboratory rule, with immediate effect | BIS step | CMD-I/2:4:1 PDF, opens in a new tab |
| January 5, 2026 (BIS circulars) | CMD-III/16, Amendment No. 1 to IS 17631 to IS 17635 | Set January 9, 2026 as the last date for Amendment No. 1 | BIS step | Circulars: IS 17631 (CMD-III/16 : IS 17631, 2026-01-05), opens in a new tab, IS 17632 (CMD-III/16 : IS 17632, 2026-01-05), opens in a new tab, IS 17633 (CMD-III/16 : IS 17633, 2026-01-05), opens in a new tab, IS 17634 (CMD-III/16 : IS 17634, 2026-01-05), opens in a new tab, IS 17635 (CMD-III/16 : IS 17635, 2026-01-05), opens in a new tab |
| January 5 to 12, 2026 (BIS portal) | PM/IS 17631/3 to 17634/3, 17635/2 and 17636/2 | Let all six products, beds included, be tested by family | BIS step | Manuals: IS 17631 (PM/IS 17631/3/Jan 26, 2026-01), opens in a new tab, IS 17632 (PM/IS 17632/3/Jan 26, 2026-01), opens in a new tab, IS 17633 (PM/IS 17633/3/Jan 26, 2026-01), opens in a new tab, IS 17634 (PM/IS 17634/3/Jan 26, 2026-01), opens in a new tab, IS 17635 (PM/IS 17635/2/Jan 26, 2026-01), opens in a new tab, IS 17636, opens in a new tab |
| February 13, 2026 (dated February 12) | S.O. 774(E), CG-DL-E-13022026-270115 | Added three exemptions on the day the order came into force | Amendment | S.O. 774(E) PDF, opens in a new tab |
| February 13, 2026 (dated February 12) | S.O. 777(E), CG-DL-E-13022026-270118 | Raised the Udyam limits to ₹1 crore of investment and ₹5 crore of turnover | Amendment | S.O. 777(E) PDF, opens in a new tab |
| March 2, 2026 (Gazette ID dated March 3) | S.O. 1125(E), CG-DL-E-03032026-270630 | Opened two import windows; by our count, both closed in August 2026, and S.O. 5950(E) later replaced them | Amendment | S.O. 1125(E) PDF, opens in a new tab |
| March 23, 2026 (dated March 17) | BIS CMD-2/G-18, CG-DL-E-24032026-271243 | Extended the annual minimum marking fee concessions for micro, small, start-up and women entrepreneurs' enterprises to May 31, 2029 | BIS step | CMD-2/G-18 PDF, opens in a new tab |
| April 6, 2026 | S.O. 1739(E), CG-DL-E-06042026-271584 | Superseded S.O. 2232(E); set October 1, 2026 for motorized furniture | Related order | S.O. 1739(E) PDF, opens in a new tab |
| June 3, 2026 (dated June 2) | DGFT Notification 20/2026-27, CG-DL-E-06062026-273230 | Widened the QCO exemption for SEZ units and developers to all goods imported for use inside the zone | DGFT rule | Notification 20/2026-27 PDF, opens in a new tab |
| June 25, 2026 | S.O. 3417(E), CG-DL-E-25062026-273832 | Opened a Scheme II route by DPIIT permission; records the February 13, 2026 start | Transition route | S.O. 3417(E) PDF, opens in a new tab |
| November 2, 2026 | S.O. 5950(E), CG-DL-E-02112026-277585 | Replaced the two import windows with one: purchase orders by August 12, 2026, Bills of Lading by November 30 and Bills of Entry by December 31, 2026 | Amendment | S.O. 5950(E) PDF, opens in a new tab |
DPIIT's guidelines for S.O. 3417(E), opens in a new tab carry no date, so they aren't listed. Our QCO tracker follows the furniture order and the other QCOs.
Did the furniture QCO start on February 13 or February 14, 2026?
The furniture QCO started on February 13, 2026. Clause 1(2) of S.O. 801(E) says only that it comes into force twelve months after publication, which was February 14, 2025. DPIIT's Schedule to S.O. 3417(E) prints the implementation date as 13.02.2026. February 14 is what you get by counting twelve months to the same calendar day.
S.O. 3417(E), Schedule, S. No. 9
"Furniture (Quality Control) Order, 2025." Date of issue: 14.02.2025. Date of implementation: 13.02.2026.
Each notice carries two dates: its own date, printed as "New Delhi, the ...", and the Gazette date in the masthead. The amendments cite the order by its own date, "S.O. 801(E), dated the 13th February, 2025". We show the Gazette date, as BIS's Scheme-I list, opens in a new tab does. Where a Gazette ID carries a later day than the masthead, as for S.O. 1125(E), we print the masthead.
March 2, 2026 is when S.O. 1125(E), opens in a new tab was published. It moved no product's start date, chairs and tables included. More answers: furniture QCO questions, answered from the official texts.
Which furniture QCO dates are still ahead?
Nine furniture dates lie ahead on November 8, 2026. Imports under S.O. 5950(E) need a Bill of Lading by November 30 and a Bill of Entry by December 31. The appliances order reaches small and micro makers of motorized furniture on January 1 and April 1, 2027. By our count, declared old stock can be sold until about mid-February 2027.
| Date | What happens | Official or worked out | Source |
|---|---|---|---|
| November 30, 2026 | The last day for the Bill of Lading under the import exemption for goods ordered by August 12, 2026 | Official | S.O. 5950(E), opens in a new tab, paragraph 2 |
| December 31, 2026 | The last day for the Bill of Entry under the same exemption | Official | S.O. 5950(E), paragraph 2 |
| January 1, 2027 | S.O. 1739(E) applies to small makers of motorized furniture | Official | S.O. 1739(E), opens in a new tab, Table, column (6) |
| About mid-February 2027 | The twelve months to sell a maker's declared old stock end | Worked out: twelve months from February 13, 2026 | S.O. 774(E), opens in a new tab, clause 2, second inserted proviso |
| February 23, 2027 | Concurrent running of IS 302-1:2008 beside IS 302 (Part 1):2024, motorized furniture's standard, ends | Official | BIS circular, opens in a new tab of January 21, 2026 |
| April 1, 2027 | S.O. 1739(E) applies to micro makers of motorized furniture | Official | S.O. 1739(E), Table, column (7) |
| About late June 2028 | Applications under S.O. 3417(E) close | Worked out: 24 months from June 25, 2026 | S.O. 3417(E), opens in a new tab, clause 5(1) |
| May 31, 2029 | BIS's marking fee concession ends | Official | CMD-2/G-18, opens in a new tab, Notes 3 to 6 |
| About late June 2031 | S.O. 3417(E) lapses unless extended | Worked out: five years from June 25, 2026 | S.O. 3417(E), clause 6(1) |
Motorized furniture is item 81 of the appliances order, S.O. 1739(E), not part of the furniture QCO. That order excludes appliances under another QCO (clause 1(3)) and doesn't say whether a motorized bed or chair needs both certifications. See motorized furniture BIS certification.
Was the furniture QCO postponed, extended or withdrawn?
No. None of the notices on furniture postponed, extended or withdrawn the order. The twelve months were in clause 1(2) of S.O. 801(E) from the start. The government listed the six products under QCOs in a Lok Sabha answer on March 10, 2026, and DPIIT listed the order in S.O. 3417(E) on June 25, 2026.
That answer counted 142 QCOs covering 721 products, the six furniture products among them (Unstarred Question 2895, opens in a new tab, Annexure-A, items 683 to 688).
The twelve months weren't added later. The draft order India notified to the WTO as G/TBT/N/IND/318, opens in a new tab already said twelve months. It also gave micro and small enterprises eighteen months and set Udyam limits of ₹25 lakh and ₹2 crore. Only the WTO notice's own form said six months, until a corrigendum of October 13, 2023 changed it to twelve.
Nor is S.O. 3417(E) a postponement: Scheme-I stays the rule for anyone DPIIT hasn't permitted to use its Scheme II route (clauses 3 and 4).
S.O. 5950(E) of November 2, 2026 isn't a postponement either. It exempts only imports ordered by August 12, 2026 that meet its Bill of Lading and Bill of Entry dates (paragraph 2).
When did the micro and small enterprise window end?
The eighteen months for micro and small enterprises ended about mid-August 2026, on August 13 or 14 depending on how the months are counted. S.O. 801(E) gave them eighteen months from publication on February 14, 2025, and no official document prints a last date. BIS's Scheme-I list shows no extension as of October 28, 2026.
The rule is the second proviso to paragraph 2 of S.O. 801(E), opens in a new tab. See the furniture QCO for MSMEs, including the Udyam exemption that still runs.
Did the 2026 amendments relax the furniture QCO?
Yes: S.O. 774(E) exempted research imports, declared old stock and export inputs, and S.O. 777(E) raised the Udyam limits. S.O. 1125(E) opened two import windows, which S.O. 5950(E) replaced with one for goods ordered by August 12, 2026. None of the 2026 amendments moved the start date. BIS's Amendment No. 1 to the standards removed some tests.
BIS's circulars, opens in a new tab of January 5, 2026 list the changes. Amendment No. 1 dropped the mechanical damage test for tables and desks, storage units and beds, and cut the bed impact test from 20 cycles to 1. It added marking for general purpose chairs and stools, tables and desks, and storage units.
Latest notices and insights
- Furniture QCO exempts imports ordered by August 12, 2026 (Insight, November 2, 2026)
- DGFT widens the QCO exemption for SEZ imports to all permissible goods for SEZ operations (Notice, June 2, 2026)
- QCO exemption widened to all permissible SEZ imports (Insight, June 2, 2026)
- Electrical appliances need the BIS mark from October 1, 2026 (Insight, April 6, 2026)
- Furniture QCO allows 200 R&D imports and a year for old stock (Insight, February 12, 2026)
Frequently asked questions
Has anything on furniture been notified since June 25, 2026?
Yes: S.O. 5950(E) of November 2, 2026 replaced the two import windows with one exemption for goods ordered by August 12, 2026. BIS's Scheme-I list, read on November 7, 2026, shows nothing later. We haven't searched every Gazette issue, so a notice BIS hasn't listed can't be ruled out.
Was the furniture QCO notified to the WTO?
Yes, as G/TBT/N/IND/318, opens in a new tab on September 27, 2023. A corrigendum of October 13, 2023 changed the notice's entry into force from six months to twelve. The European Union later raised the order at the WTO as trade concern 828, opens in a new tab.
Why is the order called S.O. 801(E) of 2025?
S.O. numbers restart every year, so the year is part of the citation. A different S.O. 801(E), a National Highways land notice, appeared in the Gazette on February 16, 2026.
Sources
- S.O. 801(E) of 2025, Furniture (Quality Control) Order, 2025 (Gazette, February 14, 2025), opens in a new tab (PDF, 1.7 MB)
- S.O. 774(E), Furniture (Quality Control) Amendment Order, 2026 (Gazette, February 13, 2026), opens in a new tab (PDF, 668 KB)
- S.O. 777(E), amendment of eight Quality Control Orders, Furniture at S. No. 8 (Gazette, February 13, 2026), opens in a new tab (PDF, 777 KB)
- S.O. 1125(E), Furniture (Quality Control) Second Amendment Order, 2026 (Gazette, March 2, 2026), opens in a new tab (PDF, 605 KB)
- S.O. 5950(E): Furniture (Quality Control) Third Amendment Order, 2026 (Gazette of India, November 2, 2026), opens in a new tab (PDF, 602 KB)
- S.O. 3417(E), Transition Facilitation (Quality Control) Order, 2026 (Gazette, June 25, 2026), opens in a new tab (PDF, 746 KB)
- S.O. 3916(E), Protective Textiles Quality Control (Upholstered Composites used for Non-Domestic Furniture) Order, 2024 (Gazette, September 12, 2024), opens in a new tab (PDF, 1.7 MB)
- S.O. 4098(E), Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2024 (Gazette, September 20, 2024), opens in a new tab (PDF, 2.1 MB)
- S.O. 2232(E), Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025 (Gazette, May 19, 2025), opens in a new tab (PDF, 1.4 MB)
- S.O. 1739(E), Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 (Gazette, April 6, 2026), opens in a new tab (PDF, 1.2 MB)
- DGFT Notification 20/2026-27, S.O. 2827(E): QCOs on imports by SEZ units and developers (Gazette, June 3, 2026; dated June 2, 2026), opens in a new tab (PDF, 561 KB)
- BIS notification CMD-2/G-18 of March 17, 2026: annual minimum marking fee concessions to May 31, 2029 (Gazette, March 23, 2026), opens in a new tab (PDF, 1.2 MB)
- BIS circular CMD-I/2:4:1 of December 16, 2025: in-house laboratory requirement, opens in a new tab (PDF, 75 KB)
- BIS product manual PM/IS 17631/2 (June 2025): work chairs, opens in a new tab (PDF, 1.1 MB)
- BIS product manual PM/IS 17632/2 (June 2025): general purpose chairs and stools, opens in a new tab (PDF, 1.1 MB)
- BIS product manual PM/IS 17633/2 (June 2025): tables and desks, opens in a new tab (PDF, 986 KB)
- BIS product manual PM/IS 17634/2 (June 2025): storage units, opens in a new tab (PDF, 1.0 MB)
- BIS circular CMD-III/16: IS 17631, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17631 (work chairs), opens in a new tab (PDF, 895 KB)
- BIS circular CMD-III/16: IS 17632, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17632 (general purpose chairs and stools), opens in a new tab (PDF, 894 KB)
- BIS circular CMD-III/16: IS 17633, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17633 (tables and desks), opens in a new tab (PDF, 896 KB)
- BIS circular CMD-III/16: IS 17634, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17634 (storage units), opens in a new tab (PDF, 898 KB)
- BIS circular CMD-III/16: IS 17635, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17635 (beds), opens in a new tab (PDF, 895 KB)
- BIS circular CMD III/16: IS 302 (Part 1), January 21, 2026: extension of the last date of implementation of the revised IS 302 series, opens in a new tab (PDF, 975 KB)
- BIS product manual PM/IS 17631/3, January 2026: work chairs (IS 17631), opens in a new tab (PDF, 979 KB)
- BIS product manual PM/IS 17632/3, January 2026: general purpose chairs and stools (IS 17632), opens in a new tab (PDF, 980 KB)
- BIS product manual PM/IS 17633/3, January 2026: tables and desks (IS 17633), opens in a new tab (PDF, 878 KB)
- BIS product manual PM/IS 17634/3, January 2026: storage units (IS 17634), opens in a new tab (PDF, 921 KB)
- BIS product manual PM/IS 17635/2, January 2026: beds (IS 17635), opens in a new tab (PDF, 993 KB)
- BIS product manual PM/IS 17636/2, January 2026: bunk beds (IS 17636), opens in a new tab (PDF, 988 KB)
- WTO ePing: G/TBT/N/IND/318 (September 27, 2023) and its corrigendum (October 13, 2023), opens in a new tab
- WTO specific trade concern 828: India, Furniture (Quality Control) Order, opens in a new tab
- Lok Sabha Unstarred Question 2895, DPIIT, March 10, 2026, Annexure-A, opens in a new tab
- BIS: products under compulsory certification, Scheme-I (read October 28, 2026), opens in a new tab
- DPIIT: Guidelines for the Transition Facilitation (Quality Control) Order, 2026 (undated), opens in a new tab (PDF, 194 KB)