Furniture QCO: BIS certification for furniture in India
The furniture QCO has applied since February 13, 2026. Work chairs, general purpose chairs and stools, tables and desks, storage units, beds and bunk beds must meet IS 17631 to IS 17636 and carry the ISI mark under a BIS licence. Micro and small makers' eighteen months from publication ended about mid-August 2026. The smallest Udyam makers stay exempt.
Published Updated
Where does the furniture QCO stand today?
The furniture QCO now covers every maker and importer of the six products, unless an exemption applies. Micro and small enterprises' eighteen months ended about mid-August 2026. Imports ordered by August 12, 2026 can be exempt until December 31, 2026, under S.O. 5950(E). Licensed or applicant makers may sell declared old stock to about mid-February 2027.

As of November 8, 2026
We read the order and every later notification clause by clause on October 28, 2026, and S.O. 5950(E) on November 8, 2026. Each line names its source.
- In force since February 13, 2026, the date DPIIT records (S.O. 3417(E), opens in a new tab, Schedule S. No. 9).
- Micro and small enterprises' eighteen months from publication ended about mid-August 2026 by our count. No official text prints the date (S.O. 801(E), para 2).
- Udyam-registered makers within ₹1 crore of investment and ₹5 crore of turnover are exempt, with no end date (S.O. 777(E), opens in a new tab).
- Imports ordered by August 12, 2026 are exempt if the Bill of Lading is issued by November 30 and the Bill of Entry by December 31, 2026. This proviso replaced the two 180-day windows on November 2, 2026 (S.O. 5950(E), opens in a new tab).
- Licensed or applicant makers may sell declared old stock to about mid-February 2027, twelve months from February 13, 2026 (S.O. 774(E), opens in a new tab).
- Since June 25, 2026, DPIIT may let a company incorporated in India buy furniture made under a BIS Scheme II licence (S.O. 3417(E)).
- No in-house laboratory has been needed since December 16, 2025 (BIS circular CMD-I/2:4:1, opens in a new tab). BIS's Scheme-I list, opens in a new tab, read on November 7, 2026, shows one furniture notification after June 25, 2026: S.O. 5950(E).
What is the furniture QCO?
The Furniture (Quality Control) Order, 2025 is a DPIIT order under section 16 of the BIS Act, 2016 that makes the ISI mark compulsory on six kinds of furniture. Each piece must meet its Indian Standard. BIS certifies and enforces the order, and a breach is punishable under the BIS Act.
The furniture QCO is S.O. 801(E) of 2025, opens in a new tab, made on February 13, 2025 and published on February 14, 2025. Cite it with the year, since another S.O. 801(E) appeared in 2026.
Four orders amend it. S.O. 774(E), opens in a new tab and S.O. 777(E), opens in a new tab are dated February 12, 2026 and were published February 13, 2026. S.O. 1125(E), opens in a new tab followed on March 2, 2026, and S.O. 5950(E), opens in a new tab on November 2, 2026. The transition order, S.O. 3417(E), opens in a new tab, sits beside them.
Our guide to Quality Control Orders in India explains QCOs in general. The furniture order on our QCO tracker lists each notification with its official copy.
Which furniture needs the ISI mark?
Six kinds of furniture need the ISI mark under the furniture QCO. They are work chairs (IS 17631), general purpose chairs and stools (IS 17632), tables and desks (IS 17633), storage units (IS 17634), beds (IS 17635) and bunk beds (IS 17636). The order names nothing else, and the latest version of each standard applies.
| Product | Indian Standard | What BIS groups a family by (January 2026 manuals) | Testing for a licence |
|---|---|---|---|
| Work chairs | IS 17631:2022 | Reclining or not, castors, footrest, user mass and hours of use a week | One lead model per family |
| General purpose chairs and stools | IS 17632:2022 | Chair or stool; Type 1 for homes or Type 2 for institutions; castors; footrest | One lead model per family |
| Tables and desks | IS 17633:2022 | Office or domestic table; castors; fixed or adjustable height | One lead model per family |
| Storage units | IS 17634:2022 | Domestic, institutional light or institutional heavy use; castors; seating surface | One lead model per family |
| Beds | IS 17635:2022 | With or without a headboard; with or without storage | One lead model per family |
| Bunk beds | IS 17636:2022 | With or without storage | One lead model per family |
BIS certification is mandatory under this order for these six kinds of furniture only, ready-to-assemble units included (BIS product manuals, opens in a new tab, Annex A). The lead model must be the most adverse in its family. The Table doesn't name sofas. Motorized furniture and upholstered composites for non-domestic furniture have orders of their own.
When did the furniture QCO start?
The furniture QCO started on February 13, 2026. S.O. 801(E) says it comes into force twelve months after publication, and it was published on February 14, 2025. DPIIT's own record, the Schedule of S.O. 3417(E), gives the implementation date as February 13, 2026. Some pages say February 14, 2026, but DPIIT's record says February 13.
| Date | What happened | Source |
|---|---|---|
| February 14, 2025 | The Gazette published the order | S.O. 801(E), masthead |
| February 13, 2026 | The order came into force; S.O. 774(E) and S.O. 777(E) were published the same day | S.O. 3417(E), Schedule S. No. 9; mastheads of S.O. 774(E) and S.O. 777(E) |
| March 2, 2026 | Two windows opened for imports shipped or ordered before February 13, 2026 | S.O. 1125(E), para 2 |
| June 25, 2026 | A Scheme II route opened, by DPIIT permission | S.O. 3417(E), clauses 3 and 4 |
| About mid-August 2026 (worked out, not printed) | Eighteen months from publication ended for micro and small enterprises; both 180-day import windows closed in August | S.O. 801(E), para 2, second proviso; S.O. 1125(E), para 2 |
| November 2, 2026 | One exemption for imports ordered by August 12, 2026 replaced the two import windows | S.O. 5950(E), para 2 |
| December 31, 2026 | The last day for the Bill of Entry under that exemption; the Bill of Lading must be issued by November 30, 2026 | S.O. 5950(E), para 2 |
What does the furniture QCO mean for your business?
What the furniture QCO means depends on who you are. Indian makers need a BIS licence unless an exemption applies, and foreign factories need one under BIS's foreign scheme. Importers may bring in only licensed, marked furniture, apart from narrow exemptions. Shops and online sellers may sell only marked pieces, apart from exempt goods and declared old stock.
| You are | What applies now | Read more |
|---|---|---|
| A large or medium furniture maker in India | A Scheme-I licence and the ISI mark on each covered product, since February 13, 2026 | BIS licence for furniture |
| A micro or small maker above the Udyam limits | The same rule, since your eighteen months from publication ended about mid-August 2026 | Furniture QCO for MSMEs |
| A Udyam maker within ₹1 crore of investment and ₹5 crore of turnover | Exempt, with no end date; turnover certified by a Chartered Accountant | The Udyam exemption |
| A maker of furniture for export | Exempt for goods made for export; pieces sold in India need the mark | Furniture QCO exemptions |
| An importer or trader | You may import only marked furniture from a factory BIS has licensed for that product, apart from narrow exemptions and the transition route | Importing furniture into India |
| A furniture factory outside India | A BIS licence under FMCS, an Authorized Indian Representative, a factory inspection and samples tested in India | BIS certification for foreign furniture makers |
| A shop, online seller or rental company | Only marked pieces, apart from exempt goods and a licensed or applicant maker's declared old stock (to about mid-February 2027, twelve months from the start) | Rules for furniture shops and sellers |
| A school, hostel or other institutional buyer | Sellers may not sell you unmarked beds, bunk beds or other covered pieces unless an exemption covers them | What furniture buyers should check |
| A company incorporated in India seeking the Scheme II route | DPIIT permission to buy Scheme II goods; applications to about late June 2028, twenty-four months from June 25, 2026 | The Transition Facilitation Order |
How do you get BIS certification for furniture?
You get BIS certification for furniture by applying for a Scheme-I licence on Manak Online with one application per product and per factory. BIS inspects the factory and checks test results against the Indian Standard. Once BIS decides to grant the licence and you pay the fees, you put the ISI mark on each piece.
- 1. Choose the Indian Standard for your product, from IS 17631 to IS 17636.
- 2. Group your models into families and pick the most adverse model in each as its lead model.
- 3. Under option 2, test the lead model at a laboratory BIS runs, recognizes or empanels before you apply. Under option 1, BIS draws samples at its inspection.
- 4. Apply on Manak Online, once for each product and each factory.
- 5. Pass BIS's inspection of your factory.
- 6. Pay the licence and marking fees, then mark each piece under BIS's surveillance.
BIS says a licence generally takes one month under option 2 and four under option 1, from a complete, recorded application (BIS FAQ, opens in a new tab, Q15). BIS's grant guidelines, opens in a new tab of February 25, 2026 put tables, desks and storage units under option 2 (Annexure-II(C)). A factory abroad goes through option 1, and BIS's average there is six months (para 3(f); FMCS FAQ, opens in a new tab 12).
India told the WTO on June 25, 2025 that three laboratories were recognized for furniture (trade concern 828, opens in a new tab). On October 28, 2026, BIS's laboratory directory, opens in a new tab listed 16 to 18 for each standard. BIS's first-licence circulars for five standards are dated from June 18, 2025 (tables and desks, opens in a new tab) to December 16, 2025 (bunk beds, opens in a new tab). We found none for storage units.
How much does BIS certification for furniture cost?
BIS charges ₹1,000 to apply, ₹7,000 per man-day of inspection and a ₹1,000 annual licence fee. On top comes an annual minimum marking fee, from ₹26,600 for a micro maker of tables and desks to ₹2,93,000 for a large maker of work chairs. Laboratory testing costs extra.
| Charge | Amount | When you pay | Source |
|---|---|---|---|
| Application fee | ₹1,000 per application | With the application | BIS FAQ, Q14 |
| Inspection fee | ₹7,000 per man-day | Before BIS's first inspection visit | BIS FAQ, Q14 |
| Annual licence fee | ₹1,000 a year | Once BIS decides to grant | BIS FAQ, Q14 |
| Annual minimum marking fee | ₹26,600 to ₹2,93,000 a year, by product and enterprise size | Half with the application, the rest at grant | BIS marking fee list, September 2026, opens in a new tab; BIS grant guidelines, opens in a new tab, para 14(a) |
BIS's list sets the small-enterprise marking fee at half the large one and the micro fee at one fifth. Those are the shares in BIS's fee concession, dated March 17, 2026, opens in a new tab (Gazette, March 23, 2026). It runs until May 31, 2029 and covers only the annual minimum marking fee.
Testing is extra. Under option 1 you pay for testing the samples BIS draws. Under option 2 you send a laboratory's reports, and BIS's check sample is covered by the marking fee (BIS grant guidelines, opens in a new tab, paras 4(b) and 15).
Are small furniture makers exempt?
Only the smallest are. Micro and small enterprises' eighteen months from publication ended about mid-August 2026. A Udyam-registered maker with up to ₹1 crore invested in plant and machinery or equipment and ₹5 crore of turnover stays exempt, with no end date. Other small makers need a licence unless another exemption applies.
- The eighteen months have ended. They ran from publication on February 14, 2025 to about mid-August 2026 by our count, and no official document prints the end date (S.O. 801(E), opens in a new tab, para 2, second proviso). BIS's Scheme-I list, read on October 28, 2026, shows no extension. Medium enterprises never had them.
- The Udyam exemption has no end date. It covers a Udyam-registered enterprise whose investment in plant and machinery or equipment, at original cost, "does not exceed rupees one crore". Its turnover for the previous financial year, certified by a Chartered Accountant, must not exceed ₹5 crore (S.O. 777(E), opens in a new tab, Table S. No. 8). These limits replaced ₹25 lakh and ₹2 crore.
- Being micro isn't the same test. Under the revised MSME criteria, a micro enterprise can have up to ₹2.5 crore of investment and ₹10 crore of turnover (Lok Sabha Starred Question 417, opens in a new tab, August 21, 2025), well above the exemption's limits.
Which exemptions still apply?
Six exemptions in the furniture QCO still apply: export goods, the smallest Udyam makers, up to 200 research imports a year, declared old stock, imported inputs for furniture made for export, and imports ordered by August 12, 2026. The old-stock window runs to about mid-February 2027. A separate DGFT rule covers imports into special economic zones.
| Exemption | Notification and clause | Status |
|---|---|---|
| Furniture made in India for export | S.O. 801(E), para 2, first proviso | Open, no end date |
| Udyam makers within ₹1 crore of investment and ₹5 crore of turnover | S.O. 777(E), Table S. No. 8 | Open, no end date |
| Up to 200 research pieces a year imported by a licensed or applicant maker, not for sale | S.O. 774(E), first inserted proviso | Open, no end date |
| Declared stock a licensed or applicant maker made or imported before February 13, 2026 | S.O. 774(E), second inserted proviso | Open to about mid-February 2027, twelve months from February 13, 2026 |
| Inputs an Indian maker imports to make furniture for export | S.O. 774(E), third inserted proviso | Open, no end date |
| Imports ordered by August 12, 2026, with a Bill of Lading by November 30 and a Bill of Entry by December 31, 2026 | S.O. 5950(E), opens in a new tab, para 2 | Open since November 2, 2026; copies to BIS within 7 days of clearance |
| Eighteen months for micro and small enterprises | S.O. 801(E), para 2, second proviso | Closed about mid-August 2026, eighteen months from publication |
| Imports shipped before February 13, 2026 | S.O. 1125(E), first inserted proviso | Closed about mid-August 2026, 180 days from February 13, 2026; replaced by S.O. 5950(E) |
| Imports ordered before February 13, 2026 | S.O. 1125(E), second inserted proviso | Closed in August 2026, 180 days on either count; replaced by S.O. 5950(E) |
| Goods SEZ units and developers import for authorized operations inside the zone | DGFT Notification 20/2026-27, opens in a new tab, a DGFT rule, not part of the order | Open since DGFT's notification of June 2, 2026; goods moved into the rest of India must meet the QCO |
Can you still import furniture into India?
Yes, from a factory that holds a BIS licence for that product, with every piece carrying the ISI mark, apart from exemptions and the transition route. Only the foreign manufacturer can apply for that licence (BIS FMCS FAQ 17). Goods ordered by August 12, 2026 can be exempt until December 31, 2026, under S.O. 5950(E).
Three exemptions in the order still cover unmarked imports: a licensed or applicant maker's research imports, inputs for furniture made for export (S.O. 774(E), opens in a new tab), and goods ordered by August 12, 2026 (S.O. 5950(E), opens in a new tab). Importing covered goods without the mark breaks section 17(1) of the BIS Act, 2016, opens in a new tab.
How does a foreign factory get BIS certification?
A foreign factory gets BIS certification through the Foreign Manufacturers Certification Scheme (FMCS). It applies on Manak Online, online only since June 1, 2026, and names an Authorized Indian Representative. BIS inspects the factory and samples are tested in India, and after grant comes a USD 10,000 bank guarantee. BIS's average is about six months.
- The representative must live in India, and an importer related to the maker may take the role (FMCS FAQ, opens in a new tab 5 to 7).
- BIS accepts only test reports to the Indian Standard (FAQ 10). Samples go to a laboratory in India that BIS runs or recognizes, at the factory's cost (FAQ 11).
- Each FMCS visit is charged at ₹7,000 per man-day, plus travel, visa and insurance (FMCS fee list, opens in a new tab).
India told the WTO on June 25, 2025: "So far BIS has not received any application for Furniture under the Foreign Manufacturers Certification Scheme" (trade concern 828, opens in a new tab).
What is the Transition Facilitation Order?
The Transition Facilitation (Quality Control) Order, 2026, S.O. 3417(E) of June 25, 2026, is a DPIIT order that lets a permitted company incorporated in India buy furniture marked under a BIS Scheme II licence. Furniture is item 9 of the ten QCOs it covers. For everyone else, the Scheme-I licence the furniture QCO requires is still the rule.
- Who may apply: only a company incorporated under the Companies Act, 2013 (S.O. 3417(E), opens in a new tab, clause 4(1)). A committee chaired by a DPIIT officer assesses the risk, and the Union Minister of Commerce and Industry approves (DPIIT's guidelines, opens in a new tab, paras 3.3 and 5.1).
- What it allows: buying goods marked under a Scheme II licence, which a maker can hold only to supply the permitted company (clauses 3(1) and 3(2)).
- Until when: applications close about late June 2028, twenty-four months from June 25, 2026. The order lapses about late June 2031, five years from that date, unless extended (clauses 5(1) and 6(1)).
Can shops and online sellers sell furniture without the ISI mark?
No. Section 17(1) of the BIS Act, 2016 bars anyone from selling, hiring, storing or displaying for sale the six products without the ISI mark under a valid licence. The order doesn't apply to goods it exempts, such as the smallest Udyam makers'. Licensed or applicant makers may also sell declared old stock for twelve months, to about mid-February 2027.
Breaking section 17 is punishable with up to two years' imprisonment, a fine, or both (BIS Act, 2016, opens in a new tab, section 29(3)). The fine is at least ₹2 lakh for a first contravention and ₹5 lakh after that, up to ten times the value of the goods. Where a company offends, its officers in charge are liable too (section 30).
The government told Parliament on March 10, 2026 that BIS had run 79 search and seizure operations in three years at sellers and warehouses working through e-commerce platforms, a figure not broken down by product (Rajya Sabha question 1961, opens in a new tab).
Which other BIS orders apply to furniture?
Two other orders reach furniture directly. Furniture with electrically motorized parts is item 81 of the household appliances safety order, S.O. 1739(E), from October 1, 2026 for most makers. Upholstered composites used in non-domestic furniture fall under S.O. 3916(E) and IS 15768. Boards, plywood, hinges, drawer slides and screws have orders of their own.
- Motorized furniture must meet IS 302 (Part 1): 2024 under S.O. 1739(E), opens in a new tab from October 1, 2026, January 1, 2027 for small enterprises and April 1, 2027 for micro enterprises. That order excludes appliances under another QCO (clause 1(3)) and doesn't say whether a motorized bed or chair needs both certifications.
- Upholstered composites for non-domestic furniture must meet IS 15768, now in its 2025 version, under S.O. 3916(E), opens in a new tab, a Ministry of Textiles order in force since September 12, 2024.
- Materials and fittings such as wood-based boards, plywood, hinges, drawer slides and screws each have their own QCO, listed on our QCO tracker.
What has BIS changed for furniture makers since 2025?
Since December 2025, BIS has made four changes that matter to furniture makers. It dropped the in-house laboratory requirement, and its January 2026 manuals let makers of all six products test one lead model per family. Amendment No. 1 removed some tests. A fee concession for micro and small enterprises runs until May 31, 2029.
- No in-house laboratory. BIS circular CMD-I/2:4:1, opens in a new tab of December 16, 2025: "There is no obligation to maintain in-house laboratory." A maker may also declare its own quality assurance plan (para 2).
- Families for all six products. BIS's January 2026 product manuals, opens in a new tab let a maker test the most adverse model in each family, beds and bunk beds included. The December 2022 manuals required each bed and bunk bed model to be tested on its own.
- Amendment No. 1. BIS set January 9, 2026 as the last date to implement it for IS 17631 to IS 17635 (BIS circulars, opens in a new tab of January 5, 2026). It removed some tests, among them the mechanical damage test, and added marking for some products.
- Fee concession. BIS's notification of March 17, 2026, opens in a new tab extends the cut in the annual minimum marking fee for micro and small enterprises to May 31, 2029.
The furniture quality control order's grouping rules and its in-house laboratory requirement weighed on manufacturers of every size.
Furniture
Relief for India’s furniture industry
Outcome. The grouping guidelines were relaxed and the in-house laboratory requirement withdrawn.
With FICCI, we gathered industry input, analyzed both provisions and represented to the government.
Read the case: Relief for India’s furniture industryWhich furniture QCO claims online are out of date?
Pages that rank for furniture QCO searches still repeat claims the official texts have overtaken. We read them on October 28, 2026. The stale points include the start date, the Udyam limits, the in-house laboratory, bed testing, the 200-piece allowance and the import windows.
| What you may read | What the official text says | Source |
|---|---|---|
| It starts on February 14, 2026 | It has applied since February 13, 2026 | S.O. 3417(E), Schedule S. No. 9 |
| Udyam limits of ₹25 lakh and ₹2 crore | ₹1 crore of investment and ₹5 crore of turnover, since February 13, 2026 | S.O. 777(E), Table S. No. 8 |
| You need in-house test equipment for a licence | No obligation to keep an in-house laboratory, since December 16, 2025 | BIS circular CMD-I/2:4:1, para 1 |
| Each bunk bed model must be certified on its own | BIS's January 2026 manuals call for one lead model per family, beds and bunk beds included | PM/IS 17635/2 and 17636/2, Annex A |
| Certified importers may bring in 200 units a year | Only licensed or applicant makers, for research and development, not for sale, and scrapped | S.O. 774(E), first inserted proviso |
| Furniture has moved to Scheme II | Only for a company DPIIT permits; Scheme-I for everyone else | S.O. 3417(E), clauses 3(2) and 4(1) |
| Goods shipped before February 13, 2026 can come in without the mark | Only if ordered by August 12, 2026, with a Bill of Lading by November 30 and a Bill of Entry by December 31, 2026; the 180-day window closed in August 2026 | S.O. 1125(E), para 2; S.O. 5950(E), para 2 |
| Medium enterprises got eighteen months | Only micro and small enterprises did | S.O. 801(E), para 2, second proviso |
| A transition permission is valid for five years | Five years is the order's own life; a permission runs for the period its letter sets | S.O. 3417(E), clauses 6(1) and 6(2); DPIIT guidelines, para 6.1 |
How IndusDesk helps with the furniture QCO
We watch the authorities, tell you what each change means for your products and plans, represent you while a decision is still open, and carry the work through, with every step on record in your workspace. For the furniture QCO, we start with where your products, factories and suppliers stand.
Frequently asked questions
Is BIS certification the same as the ISI mark?
BIS certification is the licence, and the ISI mark is what it lets you put on each piece. The furniture QCO requires the Standard Mark under a Scheme-I licence (S.O. 801(E), opens in a new tab, para 2), which the government's press release of June 25, 2026 calls the "ISI Mark Scheme" (PIB, opens in a new tab).
Whom do I ask whether my product is covered: BIS or DPIIT?
BIS certifies and enforces the furniture QCO (S.O. 801(E), para 3), so start with BIS. The transition order sends questions on its own meaning to DPIIT (S.O. 3417(E), opens in a new tab, clause 7). We found no general rule on who interprets the furniture order itself.
Why did the government bring furniture under a QCO?
The order says the government, after consulting BIS, found it "necessary or expedient so to do in the public interest" (S.O. 801(E), preamble). At the WTO on June 25, 2025, India said of the furniture standards: "Importance has been given to benefit Indian consumers with quality products" (trade concern 828, opens in a new tab).
What did the furniture industry ask for, and what changed?
Makers found the grouping rules too rigid for the variety of furniture designs, and the in-house laboratory a significant capital cost. With FICCI, we gathered industry input, analyzed both provisions and represented to the government. The outcome: the grouping guidelines were relaxed and the in-house laboratory requirement withdrawn (our furniture case study).
Where can I read the furniture QCO itself?
Our copies of the Gazette texts: S.O. 801(E) of 2025, opens in a new tab, the order; S.O. 774(E), opens in a new tab, S.O. 777(E), opens in a new tab, S.O. 1125(E), opens in a new tab and S.O. 5950(E), opens in a new tab, the amendments; and S.O. 3417(E), opens in a new tab, the transition order. On October 28, 2026, the first five matched the Gazette's own files byte for byte, and our copy of S.O. 5950(E) is the Gazette's own file, fetched November 7, 2026.
Sources
- S.O. 801(E) of 2025: Furniture (Quality Control) Order, 2025 (Gazette, February 14, 2025), opens in a new tab (PDF, 1.7 MB)
- S.O. 774(E): Furniture (Quality Control) Amendment Order, 2026 (Gazette, February 13, 2026), opens in a new tab (PDF, 668 KB)
- S.O. 777(E): amendment of eight Quality Control Orders, Furniture at S. No. 8 (Gazette, February 13, 2026), opens in a new tab (PDF, 777 KB)
- S.O. 1125(E): Furniture (Quality Control) Second Amendment Order, 2026 (Gazette, March 2, 2026), opens in a new tab (PDF, 605 KB)
- S.O. 5950(E): Furniture (Quality Control) Third Amendment Order, 2026 (Gazette of India, November 2, 2026), opens in a new tab (PDF, 602 KB)
- S.O. 3417(E): Transition Facilitation (Quality Control) Order, 2026 (Gazette, June 25, 2026), opens in a new tab (PDF, 746 KB)
- DPIIT: Guidelines for the Transition Facilitation (Quality Control) Order, 2026, opens in a new tab (PDF, 194 KB)
- PIB: Transition Facilitation (Quality Control) Order, 2026 (June 25, 2026), opens in a new tab
- S.O. 1739(E): Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 (Gazette, April 6, 2026), opens in a new tab (PDF, 1.2 MB)
- S.O. 3916(E): Protective Textiles Quality Control (Upholstered Composites used for Non-Domestic Furniture) Order, 2024 (Gazette, September 12, 2024), opens in a new tab (PDF, 1.7 MB)
- DGFT Notification 20/2026-27 (S.O. 2827(E)): QCOs and imports by SEZ units (June 2, 2026), opens in a new tab (PDF, 561 KB)
- BIS circular CMD-I/2:4:1: in-house laboratory requirement (December 16, 2025), opens in a new tab (PDF, 75 KB)
- BIS notification CMD-2/G-18 of March 17, 2026: marking fee concession to May 31, 2029 (Gazette, March 23, 2026), opens in a new tab (PDF, 1.2 MB)
- BIS product manual PM/IS 17631/3, January 2026: work chairs (IS 17631), opens in a new tab (PDF, 979 KB)
- BIS product manual PM/IS 17632/3, January 2026: general purpose chairs and stools (IS 17632), opens in a new tab (PDF, 980 KB)
- BIS product manual PM/IS 17633/3, January 2026: tables and desks (IS 17633), opens in a new tab (PDF, 878 KB)
- BIS product manual PM/IS 17634/3, January 2026: storage units (IS 17634), opens in a new tab (PDF, 921 KB)
- BIS product manual PM/IS 17635/2, January 2026: beds (IS 17635), opens in a new tab (PDF, 993 KB)
- BIS product manual PM/IS 17636/2, January 2026: bunk beds (IS 17636), opens in a new tab (PDF, 988 KB)
- BIS circular CMD-III/16: IS 17631, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17631 (work chairs), opens in a new tab (PDF, 895 KB)
- BIS circular CMD-III/16: IS 17632, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17632 (general purpose chairs and stools), opens in a new tab (PDF, 894 KB)
- BIS circular CMD-III/16: IS 17633, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17633 (tables and desks), opens in a new tab (PDF, 896 KB)
- BIS circular CMD-III/16: IS 17634, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17634 (storage units), opens in a new tab (PDF, 898 KB)
- BIS circular CMD-III/16: IS 17635, January 5, 2026: guidelines for implementation of Amendment No. 1 to IS 17635 (beds), opens in a new tab (PDF, 895 KB)
- BIS product certification FAQ, opens in a new tab
- BIS Guidelines for Grant of Licence, CMD-I/2:12:1 (February 25, 2026), opens in a new tab (PDF, 472 KB)
- BIS marking fee list for Scheme-I products (September 2026), opens in a new tab (PDF, 7.1 MB)
- BIS FMCS FAQs, opens in a new tab
- BIS FMCS: how to apply, opens in a new tab
- BIS FMCS: grant of licence, opens in a new tab
- BIS FMCS fee list, opens in a new tab (PDF, 129 KB)
- Bureau of Indian Standards Act, 2016, opens in a new tab (PDF, 133 KB)
- BIS: products under compulsory certification, Scheme-I (read October 28, 2026), opens in a new tab
- BIS LIMS laboratory directory, search by IS number (read October 28, 2026), opens in a new tab
- BIS All India First Licence circular, IS 17633 (June 2025), opens in a new tab (PDF, 695 KB)
- BIS All India First Licence circular, IS 17636 (December 2025), opens in a new tab (PDF, 679 KB)
- WTO TBT specific trade concern 828: India, Furniture QCO, opens in a new tab
- Lok Sabha Starred Question 417 (August 21, 2025): MSME criteria, opens in a new tab
- Rajya Sabha Unstarred Question 1961 (March 10, 2026): BIS enforcement, opens in a new tab