BIS certification cost for furniture: what BIS charges

The BIS certification cost for furniture, counting BIS’s own charges, starts at ₹1,000 to apply and ₹7,000 per man-day of inspection. Then you pay a ₹1,000 annual licence fee and an annual minimum marking fee of ₹26,600 to ₹2,93,000, set by product and business size. Lab testing is extra: you pay the lab.

Published and updated

What does BIS charge for a furniture licence?

BIS charges four fees for a furniture licence under Scheme-I: a ₹1,000 application fee, an inspection fee of ₹7,000 per man-day, a ₹1,000 annual licence fee, and the product’s annual minimum marking fee. You pay half the marking fee with the application and the balance when BIS grants the licence.

These are the fees for the licence the furniture QCO requires for each of its six products. BIS lists them in its product certification FAQ, opens in a new tab (Q14) and its Guidelines for Grant of Licence, opens in a new tab of February 25, 2026.

BIS fees for a Scheme-I furniture licence
FeeAmountWhen you paySource
Application fee₹1,000 per applicationWith the application, online on Manak OnlineBIS FAQ, Q7 and Q14
Inspection fee₹7,000 per man-dayBefore BIS’s preliminary factory visitBIS FAQ, Q14; Guidelines, para 12
Annual minimum marking fee, first half50% of the product’s annual minimumWith the applicationGuidelines, para 14(a)
Annual minimum marking fee, balanceThe other 50%, or more for a licence granted for over a yearAt grant of licenceGuidelines, para 14(a)
Annual licence fee₹1,000 a yearAfter BIS decides to grantBIS FAQ, Q14

The steps for applying are on our page on how to get the licence these fees pay for.

What is the annual minimum marking fee for each furniture product?

On BIS’s September 2026 list, the annual minimum marking fee for the six furniture standards runs from ₹1,33,000 to ₹2,93,000 for a large enterprise and from ₹26,600 to ₹58,600 for a micro one. Work chairs (IS 17631) carry the highest fee and tables and desks (IS 17633) the lowest.

Annual minimum marking fee by enterprise size, BIS list of September 2026
StandardLargeMediumSmallMicroUnit rate
IS 17631 Work chairs₹2,93,000 a year₹2,35,000 a year₹1,46,500 a year₹58,600 a year₹4.90 per piece
IS 17632 General purpose chairs and stools₹2,47,000 a year₹1,98,000 a year₹1,23,500 a year₹49,400 a year₹41.20 per 100 pieces
IS 17633 Tables and desks₹1,33,000 a year₹1,07,000 a year₹66,500 a year₹26,600 a year₹44.35 per 100 pieces
IS 17634 Storage units₹2,23,000 a year₹1,79,000 a year₹1,11,500 a year₹44,600 a year₹1.45 per piece
IS 17635 Beds₹2,06,000 a year₹1,65,000 a year₹1,03,000 a year₹41,200 a year₹6.90 per piece
IS 17636 Bunk beds₹1,61,000 a year₹1,29,000 a year₹80,500 a year₹32,200 a year₹4.45 per piece

Small enterprises pay half the large fee and micro enterprises one fifth, as the column heads of BIS’s marking fee list, opens in a new tab say. The unit rate is a rate per unit marked.

The minimum is a floor. At renewal you pay the unit rate on the units you marked or the minimum, whichever is higher (Guidelines, Annexure-V, para 6). The first renewal counts units marked in the licence’s first nine months; later renewals count twelve months (para 7).

Our arithmetic from the list: at ₹4.90 a chair, a large work-chair maker’s unit-rate fee passes the ₹2,93,000 minimum at about 59,800 chairs marked in the period BIS counts (₹2,93,000 divided by ₹4.90).

Is there a fee concession for micro and small businesses?

Yes. BIS notified a concession on March 17, 2026 (CMD-2/G-18, in the Gazette on March 23, 2026). Until May 31, 2029, micro enterprises and start-ups pay 20% of the large-enterprise annual minimum marking fee and small enterprises pay 50%. A woman entrepreneur’s enterprise gets a further 10% off the fee for its size.

Note 3 of the notification, opens in a new tab, for micro enterprises, reads: “From the date of this notification till 31 May 2029, a concession of 80% in the annual minimum marking fee payable by the large scale enterprises shall be applicable.” Notes 4 and 5 set 50% for small enterprises and 80% for start-ups. Note 6 adds a further 10% for a woman entrepreneur’s enterprise, whether micro, small or medium.

The concession applies to the annual minimum marking fee only. The micro and small columns in the table above are these same fractions of the large fee.

PIB Chennai reported the extension as a proposal on January 27, 2026, opens in a new tab, with a 20% cut for medium enterprises too. The March 17, 2026 notification gives medium enterprises no cut of their own beyond the 10% for a woman entrepreneur’s enterprise. Whether your business counts as micro or small is on our page on the furniture QCO for MSMEs.

What makes the BIS certification cost for furniture vary?

Three things move the total: how many product standards and factories you license, how many model families need lab tests, and how many units you mark. The application, licence and minimum marking fees are fixed amounts. Inspection days, lab charges and the unit-rate marking fee change with your products and output.

Which costs are fixed and which vary
CostFixed or variesWhat changes it
Application feeFixed: ₹1,000 per applicationOne application for each product standard at each factory (BIS FAQ, Q10 and Q11)
Inspection feeVaries: ₹7,000 per man-dayVisit length: normally one day at an Indian factory, more where BIS approves extra days or witnesses extra tests (Guidelines, paras 5(a), 5(b) and 5(e)(ii))
Lab testingVaries: paid to the labNumber of model families, one lead model tested per family (product manuals, Annex A); under option 1 you pay for testing the samples BIS draws (Guidelines, para 15(a))
Annual minimum marking feeFixed for each standard and size: ₹26,600 to ₹2,93,000 a yearProduct standard and enterprise size, with the concession for micro, small, start-up and women entrepreneurs’ enterprises until May 31, 2029
Unit-rate marking feeVaries: a rate per unit markedUnits you mark; you pay it only where it exceeds the minimum (Guidelines, Annexure-V, para 6)
RenewalVaries with the period you chooseRenewal for up to five years from the licence’s last date of validity (BIS FAQ, Q18), with production details so BIS can work out the actual marking fee (Q19)
New models laterVaries: no charge for a less adverse model in a tested familyWhether BIS accepts the new model as less adverse than the family’s tested lead model; a new family or lead model follows Regulation 10 of Scheme-I (for work chairs, PM/IS 17631/3, Annex A, para 5)

Tables and desks (IS 17633) and storage units (IS 17634) are on BIS’s option-2 list (Guidelines, Annexure-II(C), items 804 and 805). Under option 2 you apply with a lab’s test report, and the minimum marking fee covers testing BIS’s verification sample (paras 4(b) and 15(b)).

Two rules shape testing. BIS’s January 2026 product manuals, opens in a new tab for the six standards let one lead model, the most adverse, cover each family (Annex A). And since December 16, 2025, BIS hasn’t required an in-house lab; you can use a shared, cluster or outside lab (circular CMD-I/2:4:1, opens in a new tab, paras 1 and 4).

BIS’s lab directory (LIMS), opens in a new tab listed 16 to 18 recognized labs for each furniture standard on October 28, 2026, each with its testing charges. None was a National Test House lab, where registered MSMEs get 15% off testing (Lok Sabha Unstarred Question 2075, opens in a new tab, February 12, 2026).

What does BIS charge a foreign furniture factory?

BIS charges a foreign furniture factory the same fees as an Indian one, plus visit costs. You pay ₹1,000 to apply and ₹7,000 per man-day for every visit, plus ticket, visa and insurance. Add a ₹10,000 contingency fund, a ₹1,000 annual licence fee and the marking fee. Factories outside the SAARC countries pay the US dollar equivalent.

BIS fees under the Foreign Manufacturers Certification Scheme (FMCS)
FeeAmountItem on BIS’s FMCS fee list
Application fee₹1,000, non-refundableA-1.1
Special visit charges₹7,000 per man-day, plus ticket, visa, insurance and per-diem chargesA-1.2, B-5 and the list’s opening note
Contingency fund₹10,000, payable on top of the feesThe list’s opening note
Annual licence fee₹1,000 a yearB-1
Renewal application fee₹1,000 per renewal, non-refundableB-2
Late renewal fee₹5,000 per late renewalB-3
Adding varieties₹5,000 per variety, or per group where grouping guidelines existB-6
Marking fee and testingAs applicable: the marking fee from BIS’s list, testing paid to the labB-4, A-1.3 and B-8

A visit to a foreign factory normally lasts two days (Guidelines, para 5(a)). Foreign applications always go through option 1 (para 3(f)), so you send the samples BIS draws to a lab in India and pay the testing charges (FMCS FAQ, opens in a new tab 11).

Before grant, you pay the licence fee and the advance minimum marking fee. After grant, you sign an agreement and an indemnity bond and give a performance bank guarantee of USD 10,000 from a bank with an RBI-approved branch in India (FMCS grant of licence page, opens in a new tab). The guarantee isn’t on BIS’s FMCS fee list.

Factories in SAARC countries may pay in rupees with GST, as applicable, or in dollars. Bank charges and exchange-rate differences are yours to cover (FMCS fee list, opens in a new tab, Notes 1 and 2). The whole route is on our page on BIS certification for foreign furniture manufacturers.

Frequently asked questions

Does the concession cover testing or inspection?

No. The March 17, 2026 notification cuts only the annual minimum marking fee (Notes 3 to 6). The application, inspection and licence fees are the same for every size, and lab charges are paid to the lab.

Do medium enterprises pay less than large ones?

Yes. BIS’s list sets a separate medium figure for each standard, for example ₹2,35,000 against ₹2,93,000 for work chairs (IS 17631). The 2026 concession gives medium enterprises nothing more, except the further 10% for a woman entrepreneur’s enterprise.

When is the marking fee paid?

Half the annual minimum marking fee goes with the application and the balance at grant, more if BIS grants the licence for over a year (Guidelines, para 14(a)). If BIS rejects or closes the application, it returns the advance (para 14(b)).

Do I pay the minimum marking fee if I mark nothing?

Yes. BIS’s grant letter says the minimum marking fee is payable whether or not you mark your products with the Standard Mark (Guidelines, Annexure-V, para 5).

Sources