The Authorized Indian Representative (AIR) for a BIS licence
A foreign maker seeking a Bureau of Indian Standards (BIS) licence under the Foreign Manufacturers Certification Scheme (FMCS) nominates an Authorized Indian Representative (AIR) living in India. The AIR consents to answer for the BIS Act, its rules and the licence, and is named on it. It acts for one maker only, barring group companies and related importers.
Published and updated
Who needs a BIS Authorized Indian Representative?
Every foreign manufacturer applying for a licence under BIS's Foreign Manufacturers Certification Scheme (FMCS) needs an AIR. Scheme I of the Conformity Assessment Regulations, 2018, opens in a new tab requires one "based in India", nominated in Form VI (paragraph 3(1)(h)). BIS's FMCS FAQ, opens in a new tab says the applicant nominates the AIR when it applies (question 5).
See our guide to BIS certification in India and FMCS, the BIS licence for foreign manufacturers.
Under the Compulsory Registration Scheme (CRS, Scheme II), a foreign maker nominates an Indian representative in Form IV, who files its own affidavit (2026 amendment regulations, opens in a new tab, Scheme II, paragraph 3(1)(g)). See BIS CRS registration.
Who can be the AIR?
If the maker has a branch or office in India, its head or a senior person there is nominated as AIR. If it has none, the maker nominates a person on its own letterhead. The AIR must live in India, be at least a graduate, and have no conflict of interest with lab testing (BIS, Nomination of AIR, opens in a new tab).
A foreign national employed at the maker's office in India and living in India can be the AIR (FMCS FAQ, opens in a new tab, question 7). Under CRS, Form IV names a firm, not a person.
BIS's page words two rules two ways. Its opening lines say the office head or a senior person "shall be nominated", and paragraph (b) that an office employee "may preferably be". Its opening lines say "preferably at least graduate", and paragraph (d) "shall be at least graduate".
| Situation | FMCS (AIR) | CRS (Indian representative) |
|---|---|---|
| The maker has its own office in India | Its head or a senior person there | Its liaison office, subsidiary or branch office |
| No office of its own, but the brand owner is in India | Not stated in the documents read | The brand owner or its registered user, subsidiary, branch or liaison office |
| An importer or distributor | A related importer may be AIR for more than one maker. Others: not stated in the documents read | The major importer, distributor or marketing partner, only if neither choice above exists |
| A company in the maker's group | One AIR may act for several makers in one group of companies | Not stated in the documents read |
If the maker has no branch or office in India, it can nominate any person it legally appoints who meets these conditions (BIS, Nomination of AIR, opens in a new tab, paragraph (b)). To set up an office, see investing in India as a foreign company.
Can an importer, distributor or consultant be the AIR?
An importer related to the foreign maker can be the AIR, and BIS lifts its one-maker limit for it. Any other AIR represents one manufacturing firm only, unless the makers share a group. A maker with no Indian branch or office may nominate any person it legally appoints who meets BIS's conditions (BIS, Nomination of AIR, opens in a new tab, paragraphs 2 and (b)).
Only the foreign manufacturer applies for the FMCS licence, never an importer (FMCS FAQ, opens in a new tab, question 17). No BIS document we read bars a consultant from being AIR, but the one-firm and no-conflict rules apply.
Under CRS, the representative may not take part in other BIS work, such as testing samples or market surveillance. If it does, the registration may be cancelled (Scheme II, Form I, opens in a new tab, undertakings (xxii) and (xxiii)).
What does the AIR answer for?
The AIR declares consent to be responsible for compliance with the BIS Act, its rules and regulations, and the licence, agreement and undertakings the foreign maker signs. BIS names the AIR on the licence and may suspend or cancel the licence if the AIR doesn't cooperate (BIS, Nomination of AIR, opens in a new tab, paragraphs (e), (f) and (j)).
BIS may also direct a licence holder "or his representative" to stop selling and recall non-conforming goods, or to repair, replace or pay compensation (BIS Act, 2016, opens in a new tab, section 18(6) and (7)). Section 31 makes the licence holder or its representative liable to compensate a consumer injured by such goods.
When a company commits an offense under the Act, section 30 deems the company guilty, along with each director, manager, secretary or officer in charge, and the company's "authorised representative". The Act doesn't define that term or say whether it means the AIR. See BIS penalties and compounding.
What if the AIR leaves or changes address?
The maker must tell BIS well in advance of any change of AIR, or of the AIR's address. It must also make sure the licence is never left without a representative while it runs (BIS, Nomination of AIR, opens in a new tab, paragraphs (g) and (h)). A nomination in Form VI lasts until someone else is appointed.
Under CRS, the licensee tells BIS of a change of authorized representative within 21 days (Scheme II, Form I, opens in a new tab, undertaking (xvii)).
What does the AIR do day to day?
BIS lists the AIR's duties. The AIR may contact the lab about BIS samples only to deposit them and pay the testing charges. The AIR helps BIS draw market samples from imported consignments bearing the Standard Mark, appears before BIS when asked, and keeps information confidential (BIS, Nomination of AIR, opens in a new tab, paragraph (i)).
How IndusDesk helps with naming an AIR
We watch the authorities, tell you what each change means for your products and plans, represent you while a decision is still open, and carry the work through, with every step on record in your workspace. Licences and approvals are how we carry it through, never the whole of the work.
We work out which scheme applies and who meets BIS's conditions to represent the maker, and prepare the nomination and affidavits for the maker and its representative to sign and file. BIS decides every licence.
IndusDesk can act as your Authorized Indian Representative for a BIS licence.
Frequently asked questions
Can a foreign national be our AIR?
Yes, if the person works at the maker's office or branch in India and lives in India (FMCS FAQ, opens in a new tab, question 7). Otherwise the AIR is an Indian national living in India.
Can the AIR deal with the lab testing our samples?
Only to deposit BIS samples and pay the testing charges (BIS, Nomination of AIR, opens in a new tab, paragraph (i)). BIS also requires the AIR to have no conflict of interest with lab testing.
Is the AIR personally liable?
The AIR consents to answer for compliance with the BIS Act and licence terms. Section 30 deems a company's "authorised representative" guilty with the company, but doesn't say whether that means the AIR (BIS Act, 2016, opens in a new tab).
Sources
- BIS, FMCS: Nomination of AIR, paragraphs 2 and 3 and (a) to (j), last updated February 5, 2026, opens in a new tab
- BIS, FMCS: Frequently Asked Questions, questions 5, 7 and 17, last updated December 13, 2021, opens in a new tab
- Bureau of Indian Standards (Conformity Assessment) Regulations, 2018, as published on June 4, 2018: Schedule II, Scheme I, paragraph 3(1)(h) and Form VI, opens in a new tab
- Bureau of Indian Standards (Conformity Assessment) Amendment Regulations, 2026, February 25, 2026: Scheme II, paragraph 3(1)(g), Form I (item 7 and undertakings (xvii), (xxii) and (xxiii)), Forms III A, III B, IV and V, opens in a new tab (PDF, 1.6 MB)
- The Bureau of Indian Standards Act, 2016 (No. 11 of 2016), sections 17, 18(6) and (7), 29(3), 30 and 31, opens in a new tab (PDF, 133 KB)